P2 + PX + F5 at Michelin Raceway Road Atlanta

2021-05-01 P2 E&O tonneau cover provision in cockpit opening section

#30459 from Formula/Sports Racing Committee · Rule change · TB 21-05 (2021-05 Fastrack)

Summary

As printed in Fastrack

In P2, GCR section 9.1.8.D.D.7.c, make changes as follows:
"Allowed equipment would include batteries, ballast, fire bottles, data recording devices, and cool suit
equipment, providing provided such equipment is securely attached to the car. Tonneau covers are allowed in order to meet
minimum dimensions."

2021-05-01 P2 Remove effective dates in Table 1

#30468 from Formula/Sports Racing Committee · Rule change · TB 21-05 (2021-05 Fastrack)

Summary

As printed in Fastrack

In P2 Table 1, AMAC, Asteck, Cheetah, Decker, Fox, LeGrand, Converted F5 spec line, change as follows:
"Effective 01/01/2021"
In P2 Table 1, AMAC-AM5, Fox-2-Seater, Zephyrus, Decker 1/2 spec line, change as follows:
"Effective 01/01/2021"
In P2 Table 1, FIA Group CN non-composite chassis spec line, change as follows:
"Effective 01/01/2021"

2021-05-01 P2 E&O Maximum Valves Per Cylinder

#30560 from Formula/Sports Racing Committee · Rule change · TB 21-05 (2021-05 Fastrack)

Summary

As printed in Fastrack

In P2 Engine Table, Spec Line B.1, add the maximum valves per cylinder as follows:
"4"
In P2 Engine Table, Spec Line B.2, add the maximum valves per cylinder as follows:
"4"
In P2 Engine Table, Spec Line B.3, add the maximum valves per cylinder as follows:
"4"

2021-06-01 F5 Request to Allow Rotax 593 HO Engine

#30712 from Jack Walbran · Rule change · TB 21-06 (2021-06 Fastrack)

Summary

As printed in Fastrack

In F500, GCR section 9.1.1.D.14, Snowmobile Derived Engines, add the following:
"Rotax 593 in a carbureted, non-HO or HO version;"
In F500, GCR section 9.1.1.D.14.A, add the following:
"38mm intake boots, BPP 420867860 (last 6 digits 867860 are embossed on the boot), BPP 420867862 (last 6 digits 867862 are
embossed on the boot), or Kimpex 07-100-33, shall be used for the 493 and 593 non-HO engines. 38mm intake boots, BPP
420867882 (last 6 digits 867882 are embossed on the boot) shall be used for the 2003 593 HO engine, and BPP 420867879 (last 6
digits 867879 are embossed on the boot) shall be used for the 2004-2007 593 HO engines."
In F500, GCR section 9.1.1.D.14.I.3, add the following:

2021-08-01 P2 F5 P2 Conversion

#30856 from Club Racing Board · Rule change · TB 21-08 (2021-08 Fastrack)

Summary

As printed in Fastrack

In P2 Table 1, AMAC, Asteck, Cheetah, Decker, Fox, LeGrand, Converted F5 cars spec line, change the notes as follows:
"Converted F5 cars must retain suspension compliant with F5 requirements and meet all P2 non-spec line requirements except
minimum width is 55 inches."

2021-08-01 P2 Clarify minimum body width requirement

#30859 from Formula/Sports Racing Committee · Rule change · TB 21-08 (2021-08 Fastrack)

Summary

As printed in Fastrack

In P2, GCR section 9.1.8.D.D.3, add the following:
"The minimum body width between the front and rear wheels as viewed from above shall not extend inwards beyond a vertical
plane connecting the centerlines of the front and rear tires."
Ralt RT40, Ralt RT41, Swift 008, and Swift 014

A specification table follows in the original; it is not shown here.

2021-08-01 F5 Clarify allowable assisted shifting systems

#30871 from Formula/Sports Racing Committee · Rule change · TB 21-08 (2021-08 Fastrack)

Summary

As printed in Fastrack

In F5, GCR section 9.1.1.D.6.B.4, make changes as follows:
"All gear changes must be initiated and made completed by the driver. Only mechanical gear shifting mechanisms are permitted.
This may include cables, rods, or other mechanical linkage systems. All other shifting mechanisms are not permitted. This
prohibition shall include electric solenoid shifters, air-shifters, etc. and other devices not mechanically actuated and controlled
completely by the driver. Devices that allow pre-selected gear changes and closed-loop systems that use feedback from sensors
to vary the timing of the gear selection process are also prohibited.
Devices that interact with the throttle, ignition, or fuel system during a shift operation (for example: ignitions cuts, flat shifters,
blippers) are permitted, but no such devices shall remove the driver's control of the gear change initiation, gear selection or

2021-08-01 F5 Request to correct terminology

#30976 from Jim Murphy · Rule change · TB 21-08 (2021-08 Fastrack)

Summary

As printed in Fastrack

In F5, GCR section 9.1.1.D.1, change as follows:
"A class for single seat, open wheel, rigid limited suspension race cars using either a snowmobile-derived engine and drive
components or a 600cc motorcycle engine."

2021-09-01 P2 P2 CN Engine Rebuild Clarification

#31000 from Jeff Shafer · Rule change · TB 21-09 (2021-09 Fastrack)

Summary

As printed in Fastrack

In P2 Engine Table, Spec Line E, change the notes as follows:
"Must use stock Honda OEM parts as listed in CN Honda K20A-FD2 Parts List found here:
https://www.scca.com/pages/technical-forms-anddownloads. No machining allowed. Balancing, porting, and polishing are
prohibited. Engine rebuilds that include valve jobs and/or cylinder honing must strictly adhere to published factory service
procedures."

2021-12-01 P2 BoP adjustment effective 1-1-22

#31538 from Formula/Sports Racing Committee · Rule change · TB 21-12 (2021-12 Fastrack)

Summary

As printed in Fastrack

In P2 Engine Table, Spec Line B.1, change as follows:

2021-12-01 P2 E&O clarification of "Control Area" definition

#31539 from Formula/Sports Racing Committee · Rule change · TB 21-12 (2021-12 Fastrack)

Summary

As printed in Fastrack

In GCR section 9.1.8.D.E, change as follows:
"This "Control Area" is located within the plan view rectangular area defined by the rear edge of the front tires, and the front
edge of the rear tires, and the entire width of the body of the car’s lower surface facing the ground, which includes but is not
limited to the floor and any extensions of the floor or aerodynamic attachments to the floor, whether fastened to the bottom or
top side of the floor. Vertical structures such as "turning vanes" or "fins" that are attached to the car anywhere within the
"Control Area" to enhance aerodynamics are prohibited."

2022-01-01 F5 Data Box Mounting Plate

#31638 from Glen Thielke · Rule change · TB 22-01 (2022-01 Fastrack)

Summary

As printed in Fastrack

In F5, GCR section 9.1.1.D, add a new section as follows:
"19. All F5 cars competing in Majors Races and the Runoffs must have the AIM part #X47KPFSOLO2R0 data box mount installed
on the vehicle to provide the necessary mounting of the AIM Solo or Solo 2 data box. The mounting surface is to be approximately
oriented either horizontally or vertically either parallel or perpendicular to the longitudinal axis of the car and must be accessible
from the exterior of the car with the driver on board -- it should have a view of the sky and not be located under carbon fiber or
metallic bodywork. Sufficient space should be left between the mounting plate and the surface to which it is attached to permit
the use of zip ties/tie straps to restrain the data box to the mounting plate. The purpose of this requirement is to allow the
random placement of data boxes on cars on pre-grid by SCCA assigned personal and the collection of the box when the car exits

2022-01-01 P2 E&O letter #31539 – Control Area definition

#31783 from Formula/Sports Racing Committee · Rule change · TB 22-01 (2022-01 Fastrack)

Summary

As printed in Fastrack

In P2, GCR section 9.1.8.D.E, change as follows:
"This "Control Area" is located within the plan view rectangular area defined by the rear edge of the front tires, the front edge of
the rear tires, and the entire width of the car's lower surface facing the ground, which includes but is not limited to the floor and
any extensions of the floor or aerodynamic attachments to the floor, whether fastened to the bottom or top side of the
floor. Vertical structures such as "turning vanes" or "fins" that are attached to the car anywhere within the "Control Area" to
enhance aerodynamics are prohibited."

2022-02-01 P2 E&O Engine section

#31969 from Formula/Sports Racing Committee · Rule change · TB 22-02 (2022-02 Fastrack)

Summary

As printed in Fastrack

In P2, GCR section 9.1.8.D.L.c.1, change as follows:
"SCCA approved production based motorcycle engines with a maximum of 4 cylinders and with a maximum displacement
of 1500 1505cc."
In P2, GCR section 9.1.8.D.L.d, change as follows:
"Two Stroke Engine: 2 stroke engines with a maximum displacement of 1200 1205cc and a maximum of 4 cylinders."
In P2, GCR section 9.1.8.D.L.h.1, change as follows:
"Automotive engine based cars use a minimum weight of 1300 1350 lbs. unless otherwise stated in the tables."

2022-03-01 P2 Add spec line for Beasley B2

#32147 from Formula/Sports Racing Committee · Rule change · TB 22-03 (2022-03 Fastrack)

Summary

As printed in Fastrack

In P2 Table 1, add a spec line as follows:
P2 Table 1 (Spec Line Cars)

A specification table follows in the original; it is not shown here.

2022-03-01 P2 E&O Table 1 spec line wing terminology

#32148 from Formula/Sports Racing Committee · Rule change · TB 22-03 (2022-03 Fastrack)

Summary

As printed in Fastrack

In P2 Table 1, AMAC, Asteck, Cheetah, Decker, Fox, LeGrand, Converted F5 spec line, change the notes as follows:
"Wings up to 16.5in cord chord of single or dual element;"
In P2 Table 1, AMAC-AM5, Fox-2-Seater, Zephyrus, Decker 1/2 spec line, change the notes as follows:
"Wings up to 16.5in cord chord of single or dual element;"
In P2 Table 1, Bobsy spec line, change the notes as follows:
"Wings up to 16.5in cord chord of single or dual element only;"
In P2 Table 1, Jondal spec line, change the notes as follows:
"Wings up to 16.5in cord chord of single or dual element only;"

2022-03-01 F5 E&O class name

#32194 from Formula/Sports Racing Committee · Rule change · TB 22-03 (2022-03 Fastrack)

Summary

As printed in Fastrack

In F500, GCR section 9.1.1.D.19, change as follows:
"All F500 cars competing in Majors Races and the Runoffs must have the AIM part #X47KPFSOLO2R0 data box mount installed
on the vehicle to provide the necessary mounting of the AIM Solo or Solo 2 data box."

2022-03-01 P2 E&O class name

#32196 from Formula/Sports Racing Committee · Rule change · TB 22-03 (2022-03 Fastrack)

Summary

As printed in Fastrack

In P2 Table 1, AMAC, Asteck, Cheetah, Decker, Fox, LeGrand, Converted F5 cars spec line, change the marque as follows:
"AMAC, Asteck, Cheetah, Decker, Fox, LeGrand, Converted F500 cars see notes"
In P2 Table 1, AMAC, Asteck, Cheetah, Decker, Fox, LeGrand, Converted F5 cars spec line, change the notes as follows:
"Converted F500 cars must retain suspension compliant with F500 requirements and meet all P2 non-spec line requirements
except minimum width is 55 inches."

2022-04-01 P2 After Market to Aftermarket

#32373 from Club Racing Board · Rule change · TB 22-04 (2022-04 Fastrack)

Summary

As printed in Fastrack

In F500, GCR Section 9.1.1.D.15.D., change as follows:
"Stand-alone after market aftermarket ECUs are not permitted."
In P2, GCR Section 9.1.8.F.3.a., change as follows:
"As manufactured and ground by Oldsmobile or by an after after market aftermarket cam manufacturer to Oldsmobile factory
specifications for Vin.A (W41) or Mantapart #OP 1149."
In P2, GCR Section 9.1.8.F.3.b., change as follows:
"As manufactured and ground by Oldsmobile or by an after market aftermarket cam manufacturer to Oldsmobile factory profile
Vin. D or Mantapart #OP 1148."

2022-05-01 P2 E&O Clarification of Chassis Construction Requirements

#32469 from Club Racing Board · Rule change · TB 22-05 (2022-04 Fastrack)

Summary

As printed in Fastrack

In P2, GCR section 9.1.8.C.A.1, add the following:
"Chassis fully composed of composite structural materials or chassis partially composed of composite materials that is not
capable of rolling on its wheels without the composite materials being installed."
In P2, GCR section 9.1.8.C.C.1, add the following:
"Allow for any form of chassis construction except fully composite chassis. A chassis partially composed of composite materials
must satisfy the requirements of section 9.4.5.A, B, C, E, F and be capable of rolling on its wheels without the composite materials
being installed."

2022-05-01 P2 Clean up P2 wording

#32525 from Formula/Sports Racing Committee · Rule change · TB 22-05 (2022-04 Fastrack)

Summary

As printed in Fastrack

In P2, GCR section 9.1.8.C, change as follows:
"PROTOTYPE 2 (P2) CLASSIFICATION"
In GCR CONTENTS, change as follows:
"PROTOTYPE 2 (P2) CLASSIFICATION"

2022-06-01 F5 593 carb boot availability and oil pump clarification

#32527 from CARL WASSERSLEBEN · Rule change · TB 22-06 (2022-06 Fastrack)

Summary

As printed in Fastrack

In F500, GCR section 9.1.1.D.14.A, change as follows:
"Carburetor mounting shall must be of individual runners, with no balance pipes, and no plenums unless fitted as standard as on
the Rotax 493 and 593 engines. The use of the intake plenum/resonator on the 493 and the 593 engines is optional. If the intake
resonator is removed the resulting holes MUST be completely plugged and the plugs must be held in place by appropriate
clamps. Plugs may be of any material and must serve no other purpose than to plug the holes originally intended for the
resonator. 38mm intake boots, BPP 420867860 (last 6 digits 867860 are embossed on the boot), BPP 420867862 (last 6 digits
867862 are embossed on the boot), or Kimpex 07-100-33, or Moto Tassinari V-Force 3 Reed Valve System V3124-873B-
2 shall must be used for the 493 and 593 non-HO engines. 38mm intake boots, BPP 420867882 (last 6 digits 867882 are

2022-07-01 F5 Clarify stepped exhaust header references

#32743 from Club Racing Board · Rule change · TB 22-07 (2022-07 Fastrack)

Summary

As printed in Fastrack

In F500, GCR section 9.1.1.D.15.G, add the following:
"The exhaust system and exhaust manifold are unrestricted, within SCCA safety regulations, except that
stepped diameter exhaust headers are not allowed. This prohibition does not include the exhaust flange area immediately
adjacent to the cylinder head."
In F500 Engine Table, Honda CBR600RR, Suzuki GSXR600, and Yamaha R6 spec lines, add the following:
"Stepped diameter exhaust headers are not allowed"

2022-08-01 F5 Ensure availability of ECU for Rotax engines

#32695 from Carl Wassersleben · Rule change · TB 22-08 (2022-08 Fastrack)

Summary

As printed in Fastrack

In F500, GCR section 9.1.1.D.14, add a new section as follows:
"N. Alternate ECU for Rotax engines: The use of the Ingi Tech Sparker ignition part number DCP-CDI-P2 is permitted."

2022-09-01 F5 Intake Boots Correction

#33028 from Formula/Sports Racing Committee · Rule change · TB 22-09 (2022-09 Fastrack)

Summary

As printed in Fastrack

In F500, GCR section 9.1.1.D.14.A, change as follows:
“Carburetor mounting must be of individual runners, with no balance pipes and no plenums unless fitted as standard as on the
Rotax 493 and 593 engines. The use of the intake plenum/resonator on the 493 and 593 engines is optional. If the intake
resonator is removed the resulting holes MUST be completely plugged and the plugs must be held in place by appropriate
clamps. Plugs may be of any material and must serve no other purpose than to plug the holes originally intended for the
resonator. 38mm i Intake boots, BPP 420867860 (last 6 digits 867860 are embossed on the boot), BPP 420867862 1 (last 6 digits
867862 1 are embossed on the boot), or Kimpex 07-100-33, or Moto Tassinari V-Force 3 Reed Valve System V3124-873B-2 must
be used for the 493 and 593 non-HO engines. Moto Tassinari V-Force V3120-794A-2 Reed Valve System may be used with any

2023-01-01 P2 Request to Classify Sebeco NP01

#33378 from Benjamin Cooper · Rule change · TB 23-01 (2023-01 Fastrack)

Summary

As printed in Fastrack

In P2 Table 1, change as follows:
P2 Table 1 (Spec Line Cars)
Marque
Wheelbase inches
max/ Track Max
inches
Weight Displacement Engine Restrictor Notes

A specification table follows in the original; it is not shown here.

2023-01-01 P2 Radical spec line clarifications

#33485 from Jeff Barrow · Rule change · TB 23-01 (2023-01 Fastrack)

Summary

As printed in Fastrack

In P2 Table 1, Radical SR3/SR4 spec line, make the following change:
P2 Table 1 (Spec Line Cars)

A specification table follows in the original; it is not shown here.

2023-01-01 P2 E&O original class intent

#33519 from Club Racing Board · Rule change · TB 23-01 (2023-01 Fastrack)

Summary

As printed in Fastrack

In P2, GCR section 9.1.8.A.1, change as follows:
"Chassis fully composed of composite structural materials or chassis partially composed of composite materials that is not
capable of rolling on its wheels without the composite materials being installed."
In P2, GCR section 9.1.8.C.C.1, change as follows:
"Allow for any form of chassis construction except fully composite chassis incorporating composite structural materials. A chassis
partially composed of composite materials must satisfy the requirements of section 9.4.5.A, B, C, E, F, and be capable of rolling
on its wheels without the composite materials being installed. Both tube frame and aluminum or steel monocoque chassis
construction are allowed.”

A specification table follows in the original; it is not shown here.

2023-01-01 P2 Update Engine Table Spec Line B.1

#33608 from Club Racing Board · Rule change · TB 23-01 (2023-01 Fastrack)

Summary

As printed in Fastrack

In P2 Engine Table, Spec Line B.1, change as follows:

2023-04-01 P2 Remove redundant effective date language and update engine table

#34012 from Club Racing Board · Rule change · TB 23-04 (2023-04 Fastrack)

Summary

As printed in Fastrack

In P2 Engine Table, Spec Line B.1, change as follows:

2023-04-01 P2 E&O - Correct dimensional equivalents

#34038 from Club Racing Board · Rule change · TB 23-04 (2023-04 Fastrack)

Summary

As printed in Fastrack

In P2, GCR section 9.1.8.C.D.2, change as follows:
"Height: No part of the vehicle having special or significant aerodynamic function shall exceed a height of 115cm (45.275 inches)
above the ground with the car in normal racing trim, driver aboard."
In P2, GCR section 9.1.8.C.D.3, change as follows:
"However, no portion shall extend more than 10cm (3.937 inches) beyond a plane tangent to the outer face of the front and rear
wheels with tires."
P2 Engine Table
Spec

A specification table follows in the original; it is not shown here.

2023-05-01 P2 Clarify minimum side body height requirement

#34143 from Club Racing Board · Rule change · TB 23-05 (2023-05 Fastrack)

Summary

As printed in Fastrack

In P2, GCR section 9.1.8.C.D.6, change as follows:
"As viewed from the side, T the outermost surface of side pods body between the front and rear wheel openings and above the
floor must have a minimum height equal to the height of the front axle centerline."

2023-05-01 P2 Clarify closed cockpit single seat car allowance

#34144 from Club Racing Board · Rule change · TB 23-05 (2023-05 Fastrack)

Summary

As printed in Fastrack

In P2, GCR section 9.1.8.C.C, add a section as follows:
"4. Closed cockpit single seat cars are not permitted unless specifically allowed by a spec line in Table 1."

2023-12-01 P2 Correct Table 1 for Engine Date Range Specifications

#35182 from Formula/Sports Racing Committee · Rule change · TB 23-12 (2023-09 Fastrack)

Summary

As printed in Fastrack

In P2 Table 1, change as follows:
P2 Table 1 (Spec Line Cars)

A specification table follows in the original; it is not shown here.

2024-01-01 P2 E&O - Clarify B.1 modified engine range in AMAC spec lines

#35225 from Club Racing Board · Rule change · TB 24-01 (2024-01 Fastrack)

Summary

As printed in Fastrack

In P2 Table 1, change as follows:
P2 Table 1 (Spec Line Cars)

A specification table follows in the original; it is not shown here.

2024-01-01 P2 Replacement Engine Crankcase for 07/08 Suzuki GSX-R1000 Engines

#35340 from Michael A Reupert · Rule change · TB 24-01 (2024-01 Fastrack)

Summary

As printed in Fastrack

In P2 Engine Table, Spec Line B.1, add to notes as follows:
"No modifications allowed on engines manufactured after 2008 model year. 2007-2008 Suzuki GSX-R1000 crankcase part
#11300-21860 may be replaced with 2016-2019 Suzuki GSX-S1000 crankcase part #11301-04840."