BoP Lab / Classes / FE2

FE2 vs P2 vs P1 vs SM pace at every track

Lap times across years say as much about the weather as the class. % of FE2 is each class's best lap as a share of FE2's on the same day, so the conditions drop out: 100% is level, less is quicker, and a move in it is the class getting faster or slower against the field.

Class · click a class to switch, + to compare alongside (up to 4: remove one to add another)

ASB-SpecEPFAFCFE2×FFFPFVFXGT1GT2GTXHPPvsP1 ×vsP2 ×vsSM ×SMXSRF3STLSTUT1T2T3T4Show 50 inactive classes

Series Runoffs Super Tour Both

Reference · what % is measured against

Tracks · untick to narrow Auto Club Speedway Barber Motorsports Park Blackhawk Farms Raceway Buttonwillow Raceway Park Circuit of St. Louis (formerly Gateway Motorsports Circuit of the Americas Daytona International Speedway Grattan Raceway Hallett Motor Racing Circuit Homestead-Miami Speedway Indianapolis Motor Speedway Laguna Seca Michelin Raceway Road Atlanta Mid-Ohio Sports Car Course New Jersey Motorsports Park NOLA Motorsports Park Pacific Raceways Pittsburgh International Race Complex Portland International Raceway Pueblo Motorsports Park Road America Sebring International Raceway Sonoma Raceway Summit Point Raceway Thunderhill Raceway Park Virginia International Raceway Watkins Glen International Willow Springs Raceway World Wide Technology Raceway

Closest to the field: FE2 100.0% of FE2 Flinn Lazier, Sonoma Raceway Runoffs 2018 race · P2 93.4% of FE2 Tim Day Jr, Sonoma Raceway Runoffs 2018 qualifying · P1 86.4% of FE2 John Mcaleer, Virginia International Raceway Runoffs 2022 race · SM 105.3% of FE2 Travis Wiley, Virginia International Raceway Runoffs 2022 race

% of FE2Lap times

FE2P2P1SMsolid race · dashed qualifying · slower is lower

FE2P2P1SMsolid race · dashed qualifying · each class's best lap as a share of FE2's at the same event (the reference class, changeable above); 100% is level, less is quicker, so up the chart is quicker

	Event	FE2			P2					P1					SM
	Event	Qual best	Race best	Trap	Qual best	Race best	Trap	vs FE2	% of FE2	Qual best	Race best	Trap	vs FE2	% of FE2	Qual best	Race best	Trap	vs FE2	% of FE2
	Road America Runoffs 20262026-09-28	2:12.326Franklin Futrelle · fastest of 8 · top 5 within 1.9s-0.149s (-0.11%)	2:11.881Franklin Futrelle · fastest of 8 · top 5 within 1.6s-1.458s (-1.09%)	143.5Steve Whitston-5.5 mph (-3.7%)	2:10.606Greg Gyann · fastest of 11 · top 5 within 5.3s+3.201s (+2.51%)	2:09.441Mike Reupert · fastest of 11 · top 5 within 4.2s+1.119s (+0.87%)	155.0Matt Strand+2.4 mph (+1.6%)	-2.440squal -1.720s	98.1%qual 98.7%						2:42.173Brett Kowalski · fastest of 34 · top 5 within 0.3s-0.938s (-0.58%)	2:42.725Francisco Barroso · fastest of 35 · top 5 within 0.2s-1.705s (-1.04%)	119.6Wyatt Couch+0.3 mph (+0.3%)	+30.844squal +29.847s	123.4%qual 122.6%
3 rule changes (FE2: 1, SM: 2)1 cars added · 1 wording · 1 other · SM/SMX Mazda rear toe link part number revised from 0000-04-5361426 to 0000-04-5361. · SM/SMX part number 0000-10-6900 replaced with 0000-06-5016-KT in GCR 9.1.7.C.1.j.1.c. · FE and FE2 Enterprise bubble tail part WM138014 now allowed; FE2 must use this configuration only.showhide 2026-07-01 SM Rear Toe Link #40271wordingwordingSM/SMX Mazda rear toe link part number revised from 0000-04-5361426 to 0000-04-5361. 2026-04-01 SM Part Number Change Request #39914otherunclearSM/SMX part number 0000-10-6900 replaced with 0000-06-5016-KT in GCR 9.1.7.C.1.j.1.c. 2025-10-01 FE2 FE & FE2 Bubble Tail #38978cars addedaddedFE and FE2 Enterprise bubble tail part WM138014 now allowed; FE2 must use this configuration only.
	Road America Runoffs 20252025-09-29	2:12.475Franklin Futrelle · fastest of 11 · top 5 within 1.4s+0.969s (+0.74%)	2:13.339Franklin Futrelle · fastest of 10 · top 5 within 0.6s+0.591s (+0.45%)	149.0Steve Whitston+3.7 mph (+2.6%)											2:43.111Bobby Gossett · fastest of 32 · top 5 within 0.3s+2.005s (+1.24%)	2:44.430Kyle Greenhill · fastest of 28 · top 5 within 0.3s+2.944s (+1.82%)	119.3Francisco Barroso-0.6 mph (-0.5%)	+31.091squal +30.636s	123.3%qual 123.1%
6 rule changes (FE2: 1, P2: 1, SM: 4)1 weight · 3 wording · 2 other · SMX drivers must submit data acquisition files on time or face suspension and $250 fine. · SMX penalty language clarified: level 1 and 3 infractions may carry $1,000 fines, level 2 and 4 may carry $500 fines. · SM tire marking rules clarified: one Hoosier SM 7.5 P205/50/ZR17 set per Super Tour weekend, impound after first dry session, damaged tires may be replaced with used tires only. · FE2 allows pre-approved driver safety and comfort seat and control modifications for drivers with disabilities, per logbook. · P2 2000 cc Pinto engine car minimum weight set to 1335 lbs. · SMX OE instrument cluster must stay unmodified and connected; aftermarket dash allowed if wiring only re-routed; alternate gauges now permitted; foot pedal comfort mods allowed without relocation.showhide 2025-06-01 SM SMX Data Submission - Penalties #38248otheraddedSMX drivers must submit data acquisition files on time or face suspension and $250 fine. 2025-06-01 SM Committee) SMX Penaly Clarification updated language #38337wordingwordingSMX penalty language clarified: level 1 and 3 infractions may carry $1,000 fines, level 2 and 4 may carry $500 fines. 2025-05-01 SM Clarify Tire Marking Regs #38005wordingwordingSM tire marking rules clarified: one Hoosier SM 7.5 P205/50/ZR17 set per Super Tour weekend, impound after first dry session, damaged tires may be replaced with used tires only. 2025-04-01 FE2 Driver Safety & Comfort #37965otheraddedFE2 allows pre-approved driver safety and comfort seat and control modifications for drivers with disabilities, per logbook. 2024-12-01 P2 2000 cc Pinto Engine Car Weight #37187weightslowerweightP2 2000 cc Pinto engine car minimum weight set to 1335 lbs. 2024-12-01 SM E&O SMX Regs 9.1.7.1.D.5.u-.w #37070wordingwordingSMX OE instrument cluster must stay unmodified and connected; aftermarket dash allowed if wiring only re-routed; alternate gauges now permitted; foot pedal comfort mods allowed without relocation.
	Road America Runoffs 20242024-10-01	2:11.506Porter Aiken · fastest of 18 · top 5 within 0.5s-1.300s (-0.98%)	2:12.748Porter Aiken · fastest of 17 · top 5 within 2.0s-0.523s (-0.39%)	145.3Porter Aiken+1.9 mph (+1.3%)	2:07.405Bart Wolf · fastest of 14 · top 5 within 3.0s-1.109s (-0.86%)	2:08.322Bart Wolf · fastest of 13 · top 5 within 0.6s-1.471s (-1.13%)	152.5Lucian Pancea-0.6 mph (-0.4%)	-4.426squal -4.101s	96.7%qual 96.9%	2:00.476Chip Romer · fastest of 12 · top 5 within 1.5s-0.625s (-0.52%)	2:00.418Matt Romer · fastest of 9 · top 5 within 2.1s-1.452s (-1.19%)	168.3Jason Miller+8.7 mph (+5.4%)	-12.330squal -11.030s	90.7%qual 91.6%	2:41.106Ethan Goulart · fastest of 49 · top 5 within 0.5s-1.103s (-0.68%)	2:41.486Brett Kowalski · fastest of 43 · top 5 within 0.3s-2.262s (-1.38%)	119.9Alex Bertagnoli-1.4 mph (-1.2%)	+28.738squal +29.600s	121.6%qual 122.5%
15 rule changes (P2: 5, P1: 6, SM: 4)2 engine · 2 weight · 10 wording · 1 other · SMX Spec MX-5 camera requirement: non-functioning recorder now will instead of may warrant penalty or disqualification. · SM and SMX must run latest AIM Data Logger Spec MX-5 ECU Protocol, effective 2024-09-01. · SMX Mazda MX-5 OE versus OEM definitions clarified in GCR section 9.1.7.1; wording change only. · SM and SMX now allow an alternate shifter bushing at the bottom of the shift lever. · P1 engine approval process wording clarified; unspecified engines need case-by-case Board review. · P2 Spec Line E engine notes clarify oil system, ECU, and exhaust remain unrestricted; wording only. · P2 FIA Group CN notes clarify V de V European Proto Endurance Challenge bodywork, rear diffuser, wing, wheels, assisted shifting allowed; regulations link provided. · P1 removes redundant effective date language from ECU stall prohibition rule. · P1 Honda K20A-FD2 engine terminology corrected from 'spec' to proper series designation; FIA certification documentation requirement removed. · P1 Engine Table line H restrictor grows to 32 mm, weight rises to 1450 lbs; line I restrictor to 31 mm, weight to 1475 lbs. · P1 Group CN Honda K20A-FD2 removes engine modification restrictions; CRB may add intake restrictor if needed. · P2 AMAC and related cars: clarified B.1 modified engine range to 2008 and older stock engines only, with 38mm restrictor and 1025 lbs minimum weight. · P2 Suzuki GSX-R1000 engine: 2007–2008 crankcase 11300-21860 may be replaced with 2016–2019 GSX-S1000 part 11301-04840. · P2 Table 1 engine date ranges clarified: Stock Engine replaced with specific marques Suzuki, Yamaha, Honda, BMW for 2009-newer and 2008-older rows.showhide 2024-09-01 SM SMX Camera Rule Correction #36496wordingwordingSMX Spec MX-5 camera requirement: non-functioning recorder now will instead of may warrant penalty or disqualification. 2024-09-01 SM Committee) AIM ECU Protocol #36556engineaddedengineSM and SMX must run latest AIM Data Logger Spec MX-5 ECU Protocol, effective 2024-09-01. 2024-09-01 SM Committee) OE versus OEM Definitons #36608wordingwordingSMX Mazda MX-5 OE versus OEM definitions clarified in GCR section 9.1.7.1; wording change only. 2024-09-01 SM Committee) Shifter Bushing #36611otheraddedSM and SMX now allow an alternate shifter bushing at the bottom of the shift lever. 2024-05-01 P1 Update GCR section 9.1.8.B.J.7 #35907wordingwordingP1 engine approval process wording clarified; unspecified engines need case-by-case Board review. 2024-05-01 P2 CN Spec ECU #35835wordingwordingP2 Spec Line E engine notes clarify oil system, ECU, and exhaust remain unrestricted; wording only. 2024-05-01 P2 E&O - Correct FIA Group CN spec line notes #35900wordingwordingP2 FIA Group CN notes clarify V de V European Proto Endurance Challenge bodywork, rear diffuser, wing, wheels, assisted shifting allowed; regulations link provided. 2024-03-01 P1 Remove redundant effective date language in GCR 9.1.8.B.J.4 #35693wordingwordingP1 removes redundant effective date language from ECU stall prohibition rule. 2024-03-01 P1 Correct engine series terminology #35694wordingwordingP1 Honda K20A-FD2 engine terminology corrected from 'spec' to proper series designation; FIA certification documentation requirement removed. 2024-01-01 P1 Please correct omitted punctuation #34890weight 2024-01-01 P1 Adjust restrictors and weights for Engine Table lines H and I #35229weightslowerweightP1 Engine Table line H restrictor grows to 32 mm, weight rises to 1450 lbs; line I restrictor to 31 mm, weight to 1475 lbs. 2024-01-01 P1 Revise Group CN Honda K20A-FD2 Spec Line #35337wordingunclearP1 Group CN Honda K20A-FD2 removes engine modification restrictions; CRB may add intake restrictor if needed. 2024-01-01 P2 E&O - Clarify B.1 modified engine range in AMAC spec lines #35225wordingwordingP2 AMAC and related cars: clarified B.1 modified engine range to 2008 and older stock engines only, with 38mm restrictor and 1025 lbs minimum weight. 2024-01-01 P2 Replacement Engine Crankcase for 07/08 Suzuki GSX-R1000 Engines #35340engineaddedengineP2 Suzuki GSX-R1000 engine: 2007–2008 crankcase 11300-21860 may be replaced with 2016–2019 GSX-S1000 part 11301-04840. 2023-12-01 P2 Correct Table 1 for Engine Date Range Specifications #35182wordingwordingP2 Table 1 engine date ranges clarified: Stock Engine replaced with specific marques Suzuki, Yamaha, Honda, BMW for 2009-newer and 2008-older rows.
	Virginia International Raceway Runoffs 20232023-09-23	1:50.665Charles Russell Turner · fastest of 26 · top 5 within 2.3s-0.188s (-0.17%)	1:51.098Franklin Futrelle · fastest of 19 · top 5 within 1.4s-20.947s (-15.86%)	141.3Franklin Futrelle-0.6 mph (-0.4%)	1:48.590Greg Gyann · fastest of 12 · top 5 within 1.7s+1.024s (+0.95%)	1:48.829Lucian Pancea · fastest of 11 · top 5 within 0.9s-27.005s (-19.88%)	150.9Lucian Pancea-0.2 mph (-0.2%)	-2.269squal -2.075s	98.0%qual 98.1%	1:42.602Todd Vanacore · fastest of 10 · top 5 within 0.9s+1.001s (+0.99%)	1:44.329Todd Vanacore · fastest of 9 · top 5 within 0.7s-9.766s (-8.56%)	158.5Jason Miller+1.2 mph (+0.8%)	-6.769squal -8.063s	93.9%qual 92.7%	2:14.986Danny Steyn · fastest of 52 · top 5 within 0.1s+0.322s (+0.24%)	2:16.229Julian DaCosta · fastest of 46 · top 5 within 0.3s-2.878s (-2.07%)	120.3Jim Drago+1.1 mph (+0.9%)	+25.131squal +24.321s	122.6%qual 122.0%
16 rule changes (P2: 8, P1: 7, SM: 1)3 engine · 2 aero · 1 cars added · 1 weight · 9 wording · P1 SIR testing: vehicle deemed compliant if it stalls within 3 seconds of the stall test. · P1 intake restrictor rule clarified: flat plate, venturi, or Single Inlet Restrictor required; all intake air must pass through. · P1 ducted air rule clarified: top-exit ducted air must pass through heat exchanger, except cockpit opening and engine bay vents. · P2 minimum side body height must equal front axle centerline height, viewed from side. · P2 closed cockpit single seat cars now prohibited unless Table 1 spec line permits. · P1 aero height limit, front/rear overhang, and cockpit dimensions corrected to metric-inch equivalents. · P2 engine table spec line B.1 redundant effective date language removed and table updated. · P2 motorcycle restrictor reduced 35mm to 34mm for 2011+ Kawasaki; minimum weights increased to 1100 lbs for 2009+ engines; cockpit length corrected to 23.622 inches. · P1 suspension covers must have symmetrical upper and lower surfaces, no airfoil cross-sections or angled downforce. · Sebeco NP01-EVO and Elan NP01 added to P2 with Mazda 2.0L MZR, no restrictor required, 1600 lb minimum weight. · P2 Radical SR3/SR4, Cup, Club Sport, Pro-Sport, PR6: assisted shifting clarified from A-assisted to Aassisted; Cup engine restrictor changed from Unrestricted to Not required. · P2 chassis now allows composite materials partially installed; anti-intrusion panels attachment simplified; Stohr and converted models clarified. · SM Mazda MX-5 Miata 01-05 minimum weight rises to 2450 lbs, or 2465 with alternate bore. · P1 aerodynamic devices may not extend more than 1cm below lower surfaces rear of front axle; body panels covering suspension must not be airfoil-shaped or create downforce. · P1 forced induction prohibited: turbocharging and supercharging not allowed.showhide 2023-07-01 P1 SIR Testing #34354wordingwordingP1 SIR testing: vehicle deemed compliant if it stalls within 3 seconds of the stall test. 2023-07-01 P1 E&O Single Inlet Restrictor abbreviation, etc. #34369wordingwordingP1 intake restrictor rule clarified: flat plate, venturi, or Single Inlet Restrictor required; all intake air must pass through. 2023-07-01 P1 E&O Clean up ducted air provision #34410wordingwordingP1 ducted air rule clarified: top-exit ducted air must pass through heat exchanger, except cockpit opening and engine bay vents. 2023-05-01 P2 Clarify minimum side body height requirement #34143wordingwordingP2 minimum side body height must equal front axle centerline height, viewed from side. 2023-05-01 P2 Clarify closed cockpit single seat car allowance #34144wordingwordingP2 closed cockpit single seat cars now prohibited unless Table 1 spec line permits. 2023-04-01 P1 E&O - Correct dimensional equivalents #34018wordingwordingP1 aero height limit, front/rear overhang, and cockpit dimensions corrected to metric-inch equivalents. 2023-04-01 P2 Remove redundant effective date language and update engine table #34012wordingwordingP2 engine table spec line B.1 redundant effective date language removed and table updated. 2023-04-01 P2 E&O - Correct dimensional equivalents #34038enginefasterengineP2 motorcycle restrictor reduced 35mm to 34mm for 2011+ Kawasaki; minimum weights increased to 1100 lbs for 2009+ engines; cockpit length corrected to 23.622 inches. 2023-03-01 P1 November 2022 Rules Clarification for Suspension Covers #33615aerosloweraeroP1 suspension covers must have symmetrical upper and lower surfaces, no airfoil cross-sections or angled downforce. 2023-01-01 P2 Request to Classify Sebeco NP01 #33378cars addedaddedSebeco NP01-EVO and Elan NP01 added to P2 with Mazda 2.0L MZR, no restrictor required, 1600 lb minimum weight. 2023-01-01 P2 Radical spec line clarifications #33485wordingwordingP2 Radical SR3/SR4, Cup, Club Sport, Pro-Sport, PR6: assisted shifting clarified from A-assisted to Aassisted; Cup engine restrictor changed from Unrestricted to Not required. 2023-01-01 P2 E&O original class intent #33519wordingwordingP2 chassis now allows composite materials partially installed; anti-intrusion panels attachment simplified; Stohr and converted models clarified. 2023-01-01 P2 Update Engine Table Spec Line B.1 #33608engine 2023-01-01 SM BOP for NB1 and NB2 #32309weightslowerweightSM Mazda MX-5 Miata 01-05 minimum weight rises to 2450 lbs, or 2465 with alternate bore. 2022-11-01 P1 Clarify body panel coverage of suspension components #33318aeroaeroP1 aerodynamic devices may not extend more than 1cm below lower surfaces rear of front axle; body panels covering suspension must not be airfoil-shaped or create downforce. 2022-10-01 P1 E&O clarification regarding forced induction #33123engineremovedengineP1 forced induction prohibited: turbocharging and supercharging not allowed.
	Virginia International Raceway Runoffs 20222022-09-24	1:50.853Charles Russell Turner · fastest of 25 · top 5 within 1.1s-0.209s (-0.19%)	2:12.045Jason Conzo · fastest of 22 · top 5 within 1.8s+19.891s (+17.74%)	141.9Eric Cruz-0.6 mph (-0.5%)	1:47.566Tim Day Jr · fastest of 12 · top 5 within 3.0s-1.545s (-1.42%)	2:15.834Greg Gyann · fastest of 12 · top 5 within 10.1s+25.576s (+23.20%)	151.1Robert Iversen+1.8 mph (+1.2%)	+3.789squal -3.287s	102.9%qual 97.0%	1:41.601Todd Slusher · fastest of 9 · top 5 within 2.3s-1.073s (-1.05%)	1:54.095John Mcaleer · fastest of 9 · top 5 within 1.4s+10.597s (+10.24%)	157.2Jason Miller+1.3 mph (+0.8%)	-17.950squal -9.252s	86.4%qual 91.7%	2:14.664Danny Steyn · fastest of 60 · top 5 within 0.2s+0.112s (+0.08%)	2:19.107Travis Wiley · fastest of 58 · top 5 within 0.9s+2.648s (+1.94%)	119.2Jonathan Neudorf-0.6 mph (-0.5%)	+7.062squal +23.811s	105.3%qual 121.5%
14 rule changes (P2: 10, P1: 3, SM: 1)2 engine · 1 cars added · 1 weight · 9 wording · 1 other · P1 motorcycle-based engines with individual throttle bodies must use flat plate intake restrictors within 4 inches of primary butterfly. · P1 bodywork rules clarified: cycle fenders prohibited, side body minimum height at front axle centerline, air ducting for downforce banned. · P2 chassis construction clarified: full composite allowed; partial composite must roll without composite parts installed. · P2 classification wording cleaned up in GCR section 9.1.8.C and GCR contents. · P2 Oldsmobile cam rules correct spelling from 'after market' to 'aftermarket' in two sections. · SM Majors must run authorized Penske shock and mount; Regional competitors not required until further evaluation. · P2 adds Beasley B2 at 1350 lbs with Mazda 12A, 40.5mm venturi, and up to 16.5in wing chord. · P2 wings: terminology change from 'cord' to 'chord', and 'only' removed from Bobsy and Jondal notes. · P2 Converted F5 cars renamed F500, must retain F500 suspension, minimum width 55 inches. · P2 motorcycle engines gain 5cc to 1505cc max, two-stroke gains 5cc to 1205cc max, automotive engines add 50 lbs minimum weight to 1350 lbs. · P1 2-cycle 6-cylinder maximum displacement increases to 1725 cc, restrictor shrinks to 40mm, minimum weight drops to 1275 lbs. · P2 Control Area definition clarified: rectangular zone from rear edge of front tires to front edge of rear tires, full car width. · P2 specification line B.1 engine table entry amended; details of change not provided in excerpt. · P2 Control Area definition clarified: rear tire edge and front tire edge bounds, car's lower surface width, floor extensions and aerodynamic attachments included, vertical structures prohibited.showhide 2022-08-01 P1 Clarify authorization to use flat plate intake restrictor #32964engineaddedengineP1 motorcycle-based engines with individual throttle bodies must use flat plate intake restrictors within 4 inches of primary butterfly. 2022-05-01 P1 E&O Clarification of Bodywork Rules #32468wordingwordingP1 bodywork rules clarified: cycle fenders prohibited, side body minimum height at front axle centerline, air ducting for downforce banned. 2022-05-01 P2 E&O Clarification of Chassis Construction Requirements #32469wordingwordingP2 chassis construction clarified: full composite allowed; partial composite must roll without composite parts installed. 2022-05-01 P2 Clean up P2 wording #32525wordingwordingP2 classification wording cleaned up in GCR section 9.1.8.C and GCR contents. 2022-04-01 P2 After Market to Aftermarket #32373wordingwordingP2 Oldsmobile cam rules correct spelling from 'after market' to 'aftermarket' in two sections. 2022-04-01 SM Update GCR Section 9.1.7.3.A.1. #32217wordingwordingSM Majors must run authorized Penske shock and mount; Regional competitors not required until further evaluation. 2022-03-01 P2 Add spec line for Beasley B2 #32147cars addedaddedP2 adds Beasley B2 at 1350 lbs with Mazda 12A, 40.5mm venturi, and up to 16.5in wing chord. 2022-03-01 P2 E&O Table 1 spec line wing terminology #32148wordingwordingP2 wings: terminology change from 'cord' to 'chord', and 'only' removed from Bobsy and Jondal notes. 2022-03-01 P2 E&O class name #32196wordingwordingP2 Converted F5 cars renamed F500, must retain F500 suspension, minimum width 55 inches. 2022-02-01 P2 E&O Engine section #31969weightslowerweightP2 motorcycle engines gain 5cc to 1505cc max, two-stroke gains 5cc to 1205cc max, automotive engines add 50 lbs minimum weight to 1350 lbs. 2022-01-01 P1 Displacement & Weight Change Request for 2-Cycle 6 Cylinder #31609enginefasterengineP1 2-cycle 6-cylinder maximum displacement increases to 1725 cc, restrictor shrinks to 40mm, minimum weight drops to 1275 lbs. 2022-01-01 P2 E&O letter #31539 – Control Area definition #31783wordingwordingP2 Control Area definition clarified: rectangular zone from rear edge of front tires to front edge of rear tires, full car width. 2021-12-01 P2 BoP adjustment effective 1-1-22 #31538otherunclearP2 specification line B.1 engine table entry amended; details of change not provided in excerpt. 2021-12-01 P2 E&O clarification of "Control Area" definition #31539wordingwordingP2 Control Area definition clarified: rear tire edge and front tire edge bounds, car's lower surface width, floor extensions and aerodynamic attachments included, vertical structures prohibited.
	Indianapolis Motor Speedway Runoffs 20212021-09-25	1:36.395Max Grau · fastest of 28 · top 5 within 0.7s	1:36.655Max Grau · fastest of 28 · top 5 within 0.7s	146.2Gray Fowler	1:33.235Tim Day Jr · fastest of 16 · top 5 within 3.3s+1.409s (+1.53%)	1:35.322Tim Day Jr · fastest of 10 · top 5 within 4.8s+2.841s (+3.07%)	150.3Robert Iversen	-1.333squal -3.160s	98.6%qual 96.7%	1:29.011Lee Alexander · fastest of 13 · top 5 within 2.5s-1.783s (-1.96%)	1:29.225Lee Alexander · fastest of 12 · top 5 within 3.5s-2.274s (-2.49%)	160.1Jason Miller	-7.430squal -7.384s	92.3%qual 92.3%	1:57.695Brian Henderson · fastest of 90 · top 5 within 0.5s-0.611s (-0.52%)	1:58.837Brian Henderson · fastest of 88 · top 5 within 0.3s-0.263s (-0.22%)	119.8Kyle Greenhill	+22.182squal +21.300s	122.9%qual 122.1%
20 rule changes (P2: 8, P1: 11, SM: 1)4 engine · 3 cars added · 13 wording · P1 creates separate spec lines H and I for 2000cc and 2300cc engines at 1400 and 1445 lbs minimum weight respectively. · P1 Staudacher may run 950 lbs minimum weight with 38.5mm flat plate intake restrictor, removing prior weight-linked restrictor rule. · P2 CN Honda K20A-FD2 engine rebuild clarified: balancing, porting, polishing prohibited; valve jobs and honing must follow factory procedures. · P1 adds 1355cc motorcycle-based engine line C at 1075 lbs minimum weight, no restrictor required. · P2 Converted F5 cars must retain F5 suspension and meet P2 non-spec requirements except minimum width is 55 inches. · P2 minimum body width clarified: cannot extend inward beyond vertical plane through tire centerlines. · P1 cockpit opening section allows tonneau covers to meet minimum dimensions; wording clarified on equipment attachment. · P1 Staudacher 1005cc homologated before 1-1-2014 may run 38.5mm flat plate intake restrictor at 950 lbs minimum weight. · P1 Spec Line C: FPIR not required at 1150 lbs, 1355cc max may run without FPIR at 1075 lbs. Spec Line G: up to 2000cc runs 30mm SIR at 1400 lbs, 2300cc runs 30mm SIR at 1445 lbs. · P1 classes B, C, D maximum valves per cylinder set to 4, previously unspecified. · P2 tonneau covers now allowed to meet minimum dimensions; cockpit equipment attachment wording clarified. · P2 removes effective date 01/01/2021 from six car spec lines in Table 1. · P2 engine specs B.1, B.2, B.3 limited to maximum 4 valves per cylinder. · P1 Spec Line A clarifies carburetor induction only, one per cylinder, balance tubes not allowed. · P1 Spec Line H notes clarify peripheral port or bridgeport allowed; wording only. · SM adds procedure for CRB-approved obsolete parts and BOP testing in sanctioned events with point forfeiture. · P1 Elan DP02-spec Mazda MZR sealed engine option removed effective 3/1/2021. · P1 Engine Table Spec Lines C and G change 'inlet restrictor' to 'intake restrictor' terminology. · P2 adds new spec line for 2-cycle 3-cylinder engine up to 820cc with 10 front, 14–15 rear wheel width. · P2 motorcycle-engine cars: 2009+ stock 37mm restrictor, 2008- stock 35mm, modified 1075 lbs. Honda K20A 50mm restrictor. Various spec cars: restrictors increased or decreased 0.5–3mm.showhide 2021-09-01 P1 Move 2000cc and 2300cc engine options to individual spec lines #31012cars addedaddedP1 creates separate spec lines H and I for 2000cc and 2300cc engines at 1400 and 1445 lbs minimum weight respectively. 2021-09-01 P1 E&O Spec Line B notes #31095wordingwordingP1 Staudacher may run 950 lbs minimum weight with 38.5mm flat plate intake restrictor, removing prior weight-linked restrictor rule. 2021-09-01 P2 P2 CN Engine Rebuild Clarification #31000wordingwordingP2 CN Honda K20A-FD2 engine rebuild clarified: balancing, porting, polishing prohibited; valve jobs and honing must follow factory procedures. 2021-08-01 P1 Add 1355cc spec line #30890cars addedaddedP1 adds 1355cc motorcycle-based engine line C at 1075 lbs minimum weight, no restrictor required. 2021-08-01 P2 F5 P2 Conversion #30856wordingwordingP2 Converted F5 cars must retain F5 suspension and meet P2 non-spec requirements except minimum width is 55 inches. 2021-08-01 P2 Clarify minimum body width requirement #30859wordingwordingP2 minimum body width clarified: cannot extend inward beyond vertical plane through tire centerlines. 2021-05-01 P1 E&O tonneau cover provision in cockpit opening section #30458wordingwordingP1 cockpit opening section allows tonneau covers to meet minimum dimensions; wording clarified on equipment attachment. 2021-05-01 P1 Update Spec Line B Notes #30498wordingwordingP1 Staudacher 1005cc homologated before 1-1-2014 may run 38.5mm flat plate intake restrictor at 950 lbs minimum weight. 2021-05-01 P1 Update Spec Lines C and G notes #30499wordingwordingP1 Spec Line C: FPIR not required at 1150 lbs, 1355cc max may run without FPIR at 1075 lbs. Spec Line G: up to 2000cc runs 30mm SIR at 1400 lbs, 2300cc runs 30mm SIR at 1445 lbs. 2021-05-01 P1 E&O Maximum Valves Per Cylinder #30559engineengineP1 classes B, C, D maximum valves per cylinder set to 4, previously unspecified. 2021-05-01 P2 E&O tonneau cover provision in cockpit opening section #30459wordingwordingP2 tonneau covers now allowed to meet minimum dimensions; cockpit equipment attachment wording clarified. 2021-05-01 P2 Remove effective dates in Table 1 #30468wordingwordingP2 removes effective date 01/01/2021 from six car spec lines in Table 1. 2021-05-01 P2 E&O Maximum Valves Per Cylinder #30560engineengineP2 engine specs B.1, B.2, B.3 limited to maximum 4 valves per cylinder. 2021-04-01 P1 Clean up Spec Line A notes section #30424wordingwordingP1 Spec Line A clarifies carburetor induction only, one per cylinder, balance tubes not allowed. 2021-04-01 P1 Clean up Spec Line H notes section #30425wordingwordingP1 Spec Line H notes clarify peripheral port or bridgeport allowed; wording only. 2021-04-01 SM Updates - Obsolete Parts & BOP Parts #30438wordingaddedSM adds procedure for CRB-approved obsolete parts and BOP testing in sanctioned events with point forfeiture. 2021-03-01 P1 DP02 Sealed 2ltr Engine Option #30038engineremovedengineP1 Elan DP02-spec Mazda MZR sealed engine option removed effective 3/1/2021. 2021-03-01 P1 E&O restrictor terminology #30285wordingwordingP1 Engine Table Spec Lines C and G change 'inlet restrictor' to 'intake restrictor' terminology. 2021-03-01 P2 Add a new spec line for a 2-cycle, 3-cylinder engine up to 820cc #30272cars addedaddedP2 adds new spec line for 2-cycle 3-cylinder engine up to 820cc with 10 front, 14–15 rear wheel width. 2020-12-01 P2 Balance of Performance adjustments effective 01-01-2021 #29822engineunclearP2 motorcycle-engine cars: 2009+ stock 37mm restrictor, 2008- stock 35mm, modified 1075 lbs. Honda K20A 50mm restrictor. Various spec cars: restrictors increased or decreased 0.5–3mm.
	Road America Runoffs 20202020-10-02	2:12.806Scott Rettich · fastest of 25 · top 5 within 0.6s	2:13.271Owen McAllister · fastest of 23 · top 5 within 0.7s	143.4Owen McAllister	2:08.514Robert Iversen · fastest of 12 · top 5 within 3.0s	2:09.793Robert Iversen · fastest of 12 · top 5 within 3.9s	153.1Robert Iversen	-3.478squal -4.292s	97.4%qual 96.8%	2:01.101James French · fastest of 18 · top 5 within 1.1s	2:01.870James French · fastest of 17 · top 5 within 1.8s	159.7David Locke	-11.401squal -11.705s	91.4%qual 91.2%	2:42.209Kyle Greenhill · fastest of 77 · top 5 within 0.5s	2:43.748Preston Pardus · fastest of 75 · top 5 within 1.0s	121.3Kyle Greenhill	+30.477squal +29.403s	122.9%qual 122.1%
14 rule changes (FE2: 2, P2: 6, P1: 4, SM: 2)2 engine · 2 induction · 1 aero · 1 cars added · 1 removed · 1 suspension & brakes · 1 weight · 4 wording · 1 other · SM allows aftermarket radiators in original location with stock OEM cooling fan, and permits 1990-1997 cars to install upper radiator seal NA75-50-OK7A. · FE2 oil cooler rule clarified: Setrab 50-625-7612 or any cooler with max core 13 inches wide by 6.5 inches high allowed. · P2 rear wing rules clarified: standard wing 6×12 inches, end plates 14-inch square; alternate 1-meter formula wing 110cm wide, 9×18 inches, end plates 14×18 inches. · SM rear brake caliper may use single bracket under upper retaining bolt head to prevent pin failure. · Elan NP01 added to P2 Table 1 as Spec Line car with 2000cc displacement and 42mm restrictor. · P1 intake manifolds unrestricted unless engine requires flat plate restrictor; no plenums or balance pipes on restricted individual runner manifolds. · P2 Enterprises Sports Racer now permits 55mm flat plate intake restrictor Part # WM303013 as alternative to SIR. · P2 Enterprise Sports Racer 2.3L engine must use SIR or Flat Plate restrictor meeting peak horsepower, sized in whole or 0.5mm increments. · P2 electronic throttle control wording clarified: ETC permitted if stock ECU throttle pedal activates original throttle shaft mechanism. · P1 sealed 2.0L Elan DP02-spec Mazda option removal date extended from 1/1/2020 to 1/1/2021. · P1 sealed 2.0 MZR engine removed effective 1/1/2020; competitors may run it under Spec Line G. · P1 Spec Line F: Restricted 2.0L Group becomes CN-spec Honda K20A-FD2, 2000cc, 1400 lbs minimum. · P2 adds BMW to permitted motorcycle-based engines alongside Kawasaki, Suzuki, Yamaha, Honda. · FE minimum weight rises to 1270 lbs; FE2 minimum weight rises to 1270 lbs; new spring options added; tire warmers prohibited.showhide 2020-10-01 SM Radiator E&O Clarifications #29294wordingwordingSM allows aftermarket radiators in original location with stock OEM cooling fan, and permits 1990-1997 cars to install upper radiator seal NA75-50-OK7A. 2020-09-01 FE2 FE/FE2 Oil Cooler #29293wordingwordingFE2 oil cooler rule clarified: Setrab 50-625-7612 or any cooler with max core 13 inches wide by 6.5 inches high allowed. 2020-09-01 P2 E&O clarification of P2 rear wing requirements #29205aeroaeroP2 rear wing rules clarified: standard wing 6×12 inches, end plates 14-inch square; alternate 1-meter formula wing 110cm wide, 9×18 inches, end plates 14×18 inches. 2020-08-01 SM Modifications to prevent failures of Rear Brake Caliper Pin #28953suspension & brakessuspension & brakesSM rear brake caliper may use single bracket under upper retaining bolt head to prevent pin failure. 2020-06-01 P2 Classify Elan NP01 in P2 Table 1 #28812cars addedaddedElan NP01 added to P2 Table 1 as Spec Line car with 2000cc displacement and 42mm restrictor. 2020-05-01 P1 E&O minimum weights and intake manifolds #28731inductioninductionP1 intake manifolds unrestricted unless engine requires flat plate restrictor; no plenums or balance pipes on restricted individual runner manifolds. 2020-05-01 P2 SCCA Enterprises ESR / P2 engine restrictor testing #28669otheraddedP2 Enterprises Sports Racer now permits 55mm flat plate intake restrictor Part # WM303013 as alternative to SIR. 2020-04-01 P2 Add ESR inlet restrictor #27869inductionaddedinductionP2 Enterprise Sports Racer 2.3L engine must use SIR or Flat Plate restrictor meeting peak horsepower, sized in whole or 0.5mm increments. 2020-03-01 P2 Request for Fly by Wire Rule Wording Change #28247wordingwordingP2 electronic throttle control wording clarified: ETC permitted if stock ECU throttle pedal activates original throttle shaft mechanism. 2020-02-01 P1 Extend date for removing sealed DP02-spec 2.0L option #28046wordingunclearP1 sealed 2.0L Elan DP02-spec Mazda option removal date extended from 1/1/2020 to 1/1/2021. 2020-01-01 P1 Remove sealed DP02-spec 2.0 MZR spec #26753removedremovedP1 sealed 2.0 MZR engine removed effective 1/1/2020; competitors may run it under Spec Line G. 2020-01-01 P1 Update Revised Spec Line F #27745engineengineP1 Spec Line F: Restricted 2.0L Group becomes CN-spec Honda K20A-FD2, 2000cc, 1400 lbs minimum. 2020-01-01 P2 Request for addition of BMW Engine in P2 Engine Table #27821engineaddedengineP2 adds BMW to permitted motorcycle-based engines alongside Kawasaki, Suzuki, Yamaha, Honda. 2019-12-01 FE2 FE / FE2 Update Rules #27624weightslowerweightFE minimum weight rises to 1270 lbs; FE2 minimum weight rises to 1270 lbs; new spring options added; tire warmers prohibited.
	Virginia International Raceway Runoffs 20192019-10-05	1:51.062Liam Snyder · fastest of 20 · top 5 within 1.3s	1:52.154Liam Snyder · fastest of 19 · top 5 within 0.7s	142.6Robert Vanman	1:49.111Robert Iversen · fastest of 14 · top 5 within 0.8s	1:50.258Greg Gyann · fastest of 13 · top 5 within 0.4s	149.4Robert Iversen	-1.896squal -1.951s	98.3%qual 98.2%	1:42.674Todd Slusher · fastest of 14 · top 5 within 1.5s	1:43.498Todd Slusher · fastest of 13 · top 5 within 1.0s	155.9Jim Devenport	-8.656squal -8.388s	92.3%qual 92.4%	2:14.552Todd Buras · fastest of 60 · top 5 within 0.2s	2:16.459Elivan Goulart · fastest of 56 · top 5 within 0.4s	119.8Jim Drago	+24.305squal +23.490s	121.7%qual 121.2%
27 rule changes (P2: 9, P1: 14, SM: 4)4 engine · 2 cars added · 1 induction · 1 weight · 16 wording · 3 other · P2 Honda K20A-FD2 non-composite chassis intake restrictor note clarified; restrictor implementation date removed. · P2 motorcycle engines: Stock restrictor to 35mm, Modified to 34mm; weights up to 1025 and 1125 lbs respectively. B.5 restrictor to 33mm, weight to 1185 lbs. · P1 traction control prohibited. · P1 permits mechanical, solenoid, and air-shifters; prohibits electronic pre-selection and multi-wheel power. · P1 minimum bodywork height rule moved and restated with new 115cm aerodynamic part height limit. · P1 consolidates fender louver rules into one section; removes duplicate allowance for louvers and clarifies brake and engine air ducts are permitted. · P2 cars limited to power application on maximum two wheels. · P2 Enterprise minimum weight increased to 1375 lbs.; peak horsepower of sealed ESR engine reduced per CRB specification. · P1 anti-intrusion panels now allowed anywhere on chassis sides instead of specified locations. · P1 bodywork wording clarified: comfort and safety for driver and passenger or driver only. · P1 Engine Table reference cleaned up; no performance change. · P1 Mazda Renesis Rotary engine spec line removed from Engine Table. · P1 Staudacher and Honda K20A-FD2 engine table wording clarified; no performance change. · P1 closed cockpit single-seat cars remain prohibited; rule moved from subsection J.5 to B.4. · P2 stock and modified engines get smaller restrictors (35.0mm, 34.0mm, 33.0mm) and heavier minimums (1025, 1125, 1185 lbs). · P2 Line A.1 restrictor reduced from 40mm to 38mm. · SM fuel pump and filter now permitted as Mazda or OEM equivalent part. · P1 engine table reference corrected from 'above' to 'below'; ETC/FBW/DBW throttle wording clarified on sensor and fail-safe requirements. · SM allows factory Mazda ECU and injector harnesses (P/N 0000-10-020E-99, 0000-10-080D-99) on 1999–2000 model year cars, unmodified. · SM electrical rules reorganized and clarified; alternator now externally regulated only by OEM ECU or master kill switch; harness repair by splicing permitted. · SM tire tread protrusion language removed from GCR 9.1.7.C.5. · P1 removes TIR inlet restrictor option; deletes requirement for single turbo/supercharger unit with single restrictor. · P1 CN-spec Honda K20A-FD2 clarified: stock OEM parts required, no machining allowed. · P1 engine rules correct grammar and remove head designs from specification table. · P2 Spec Line cars now allow 1345cc Hayabusa stock engines at 1050 lb minimum with 30mm restrictor. · P2 Group CN Honda K20A-FD2 55mm intake restrictor implementation delayed from 1 January to 3 March 2019. · P2 Honda K20A-FD2 Group CN must use stock intake manifold, 64mm throttle, 55mm restrictor at 1500 lbs minimum.showhide 2019-10-01 P2 Update Engine Table Line E notes #27414wordingwordingP2 Honda K20A-FD2 non-composite chassis intake restrictor note clarified; restrictor implementation date removed. 2019-08-31 P2 Update P2 Engine Table spec lines to reflect 3/1/2019 #27254engineslowerengineP2 motorcycle engines: Stock restrictor to 35mm, Modified to 34mm; weights up to 1025 and 1125 lbs respectively. B.5 restrictor to 33mm, weight to 1185 lbs. 2019-08-01 P1 E&O Transmissions #27098wordingwordingP1 traction control prohibited. 2019-07-01 P1 E&O Transmissions #27005otheraddedP1 permits mechanical, solenoid, and air-shifters; prohibits electronic pre-selection and multi-wheel power. 2019-07-01 P1 Move minimum height provision to #27031wordingwordingP1 minimum bodywork height rule moved and restated with new 115cm aerodynamic part height limit. 2019-07-01 P1 Remove duplicative fender louver provision #27033wordingwordingP1 consolidates fender louver rules into one section; removes duplicate allowance for louvers and clarifies brake and engine air ducts are permitted. 2019-07-01 P2 E&O Transmissions #27006engineslowerengineP2 cars limited to power application on maximum two wheels. 2019-06-01 P2 Request to restrict all cars #26246weightslowerweightP2 Enterprise minimum weight increased to 1375 lbs.; peak horsepower of sealed ESR engine reduced per CRB specification. 2019-05-31 P1 Missing word E&O #26919wordingwordingP1 anti-intrusion panels now allowed anywhere on chassis sides instead of specified locations. 2019-05-31 P1 E&O correction to GCR 9.1.8.C.C. #26927wordingwordingP1 bodywork wording clarified: comfort and safety for driver and passenger or driver only. 2019-05-01 P1 Clean up reference to engine table #26648wordingwordingP1 Engine Table reference cleaned up; no performance change. 2019-05-01 P1 Remove redundant spec line #26692cars addedremovedcars addedP1 Mazda Renesis Rotary engine spec line removed from Engine Table. 2019-04-01 P1 Clean Up Engine Table Language #26590wordingwordingP1 Staudacher and Honda K20A-FD2 engine table wording clarified; no performance change. 2019-03-01 P1 Move single-seat closed cockpit provision to #26376wordingwordingP1 closed cockpit single-seat cars remain prohibited; rule moved from subsection J.5 to B.4. 2019-03-01 P2 Change Engine Table Lines B.1 & B.5 #25777inductionslowerinductionP2 stock and modified engines get smaller restrictors (35.0mm, 34.0mm, 33.0mm) and heavier minimums (1025, 1125, 1185 lbs). 2019-03-01 P2 Change Line A.1 restrictor size #26429engineslowerengineP2 Line A.1 restrictor reduced from 40mm to 38mm. 2019-03-01 SM Request to allow aftermarket fuel filters. #26370otheraddedSM fuel pump and filter now permitted as Mazda or OEM equivalent part. 2019-02-01 P1 Correct errors in GCR section 9.1.8.C.J #26144wordingwordingP1 engine table reference corrected from 'above' to 'below'; ETC/FBW/DBW throttle wording clarified on sensor and fail-safe requirements. 2019-02-01 SM Request 99-00 replacement Wire harnesses #25602otheraddedSM allows factory Mazda ECU and injector harnesses (P/N 0000-10-020E-99, 0000-10-080D-99) on 1999–2000 model year cars, unmodified. 2019-02-01 SM Organize and Clarify 9.1.7.C.1.o. #25913wordingwordingSM electrical rules reorganized and clarified; alternator now externally regulated only by OEM ECU or master kill switch; harness repair by splicing permitted. 2019-02-01 SM Strike Tire Tread Language #26123wordingremovedSM tire tread protrusion language removed from GCR 9.1.7.C.5. 2019-01-01 P1 Remove redundant inlet restrictor provisions #25877wordingwordingP1 removes TIR inlet restrictor option; deletes requirement for single turbo/supercharger unit with single restrictor. 2019-01-01 P1 Clarify Honda K20A-FD2 parts requirement #25949wordingwordingP1 CN-spec Honda K20A-FD2 clarified: stock OEM parts required, no machining allowed. 2019-01-01 P1 Correct GCR section 9.1.8.C.J errors #25966wordingwordingP1 engine rules correct grammar and remove head designs from specification table. 2019-01-01 P2 Request to Allow 1345cc Hayabusa Engines for Spec Line P2 Cars #25595cars addedaddedP2 Spec Line cars now allow 1345cc Hayabusa stock engines at 1050 lb minimum with 30mm restrictor. 2019-01-01 P2 Change CN inlet restrictor implementation date #25816wordingwordingP2 Group CN Honda K20A-FD2 55mm intake restrictor implementation delayed from 1 January to 3 March 2019. 2019-01-01 P2 Clarify Honda K20A-FD2 parts requirement #25950engineslowerengineP2 Honda K20A-FD2 Group CN must use stock intake manifold, 64mm throttle, 55mm restrictor at 1500 lbs minimum.
	Sonoma Raceway Runoffs 20182018-10-10	1:35.040Flinn Lazier · fastest of 9 · top 5 within 1.5s	1:35.563Flinn Lazier · fastest of 9 · top 5 within 1.7s	126.8Scott Rettich	1:28.784Tim Day Jr · fastest of 17 · top 5 within 5.0s	1:32.071Chuck Bona · fastest of 18 · top 5 within 0.9s	144.4Tim Day Jr	-3.492squal -6.256s	96.3%qual 93.4%	1:27.714Todd Slusher · fastest of 19 · top 5 within 2.1s	1:28.786Perry Richardson · fastest of 19 · top 5 within 0.9s	144.0Johnnie Crean	-6.777squal -7.326s	92.9%qual 92.3%	1:54.355Ken Sutherland · fastest of 48 · top 5 within 0.7s	1:55.278Michael Carter · fastest of 48 · top 5 within 0.3s	102.2Danny Steyn	+19.715squal +19.315s	120.6%qual 120.3%
No rule changes on record between these events
	Indianapolis Motor Speedway Runoffs 20172017-09-25				1:31.826Jeff Shafer · fastest of 26 · top 5 within 4.9s	1:32.481Jeff Shafer · fastest of 24 · top 5 within 3.8s				1:30.794Jim Devenport · fastest of 19 · top 5 within 2.8s	1:31.499Jim Devenport · fastest of 16 · top 5 within 2.2s				1:58.306Chris Haldeman · fastest of 86 · top 5 within 0.5s	1:59.100Michael Gagliardo · fastest of 83 · top 5 within 0.6s
No rule changes on record between these events
	Mid-Ohio Sports Car Course Runoffs 20162016-09-19				1:20.188Jeff Shafer · fastest of 18 · top 5 within 4.0s	1:20.904Jeff Shafer · fastest of 16 · top 5 within 2.2s				1:17.308James Devenport · fastest of 14 · top 5 within 2.7s	1:19.407Gianpaolo Ciancimino · fastest of 13 · top 5 within 1.8s				1:40.514Justin Hille · fastest of 45 · top 5 within 0.3s	1:40.764Michael Carter · fastest of 44 · top 5 within 0.3s
No rule changes on record between these events
	Daytona International Speedway Runoffs 20152015-09-21				1:51.825Chris Farrell · fastest of 17 · top 5 within 3.6s	1:52.355Jeff Shafer · fastest of 17 · top 5 within 2.8s				1:49.219Jim Downing · fastest of 9 · top 5 within 2.2s	1:49.792Gianpaolo Ciancimino · fastest of 10 · top 5 within 1.7s				2:18.661Andrew Carbonell · fastest of 62 · top 5 within 0.6s	2:24.067Todd Lamb · fastest of 59 · top 5 within 0.8s

By track

Track	Events	Typical % of FE2	Best	Latest
Road America	4	100.0%	100.0%Runoffs 2020	100.0%Runoffs 2026
Virginia International Raceway	3	100.0%	100.0%Runoffs 2019	100.0%Runoffs 2023
Indianapolis Motor Speedway	2	100.0%1 of 2 with FE2	100.0%Runoffs 2021	100.0%Runoffs 2021
Daytona International Speedway	1	0 of 1 with FE2
Mid-Ohio Sports Car Course	1	0 of 1 with FE2
Sonoma Raceway	1	100.0%	100.0%Runoffs 2018	100.0%Runoffs 2018

About this data

Every event the class ran, at any track, oldest to newest on the chart and newest first in the table. Each point is the class's best lap as a share of FE2's best on the same day: the weather and the day cancel out, so one figure compares across years where lap times cannot; a class that suits one track more than another still reads differently there. It still moves when the yardstick's own balance changes or its field thins, and an event the yardstick did not run has no point. A best from fewer than three cars is greyed. The rule changes that took effect between two events are folded between their rows.