BoP Labbeta

BoP Lab / Michelin Raceway Road Atlanta

P2 vs SRF vs FV vs EP pace at Michelin Raceway Road Atlanta

Class · click a class to switch, + to compare alongside (up to 4: remove one to add another)
Reference class · the others' laps as a share of this one's at the same event, so years compare despite weather; + a class above to measure against it

Quickest here: P2 1:22.533 Lucian Pancea, Super Tour Mar 2023 qualifying · FV 1:43.556 Andrew Whitston, Super Tour Mar 2024 race · EP 1:34.341 Jesse Prather, Super Tour Mar 2021 qualifying

1:201:251:301:351:401:4543 rule changes between Super Tour Mar 2021 and Super Tour Mar 202243 ▾26 rule changes between Super Tour Mar 2022 and Super Tour Mar 202326 ▾30 rule changes between Super Tour Mar 2023 and Super Tour Mar 202430 ▾23 rule changes between Super Tour Mar 2024 and Super Tour Mar 202523 ▾23 rule changes between Super Tour Mar 2025 and Super Tour Mar 202623 ▾P2 race best at Super Tour Mar 2021: 1:26.120 (Lucian Pancea)P2 race best at Super Tour Mar 2022: 1:23.071 (Robert Iversen)P2 race best at Super Tour Mar 2023: 1:23.804 (Lucian Pancea)P2 race best at Super Tour Mar 2024: 1:26.233 (Sherman Chao)P2 qualifying best at Super Tour Mar 2021: 1:27.406 (Lucas Mann)P2 qualifying best at Super Tour Mar 2022: 1:24.013 (Robert Iversen)P2 qualifying best at Super Tour Mar 2023: 1:22.533 (Lucian Pancea)P2 qualifying best at Super Tour Mar 2024: 1:24.228 (Lucian Pancea)FV race best at Super Tour Mar 2021: 1:43.747 (Donnie Isley)FV race best at Super Tour Mar 2022: 1:45.871 (Stevan Davis)FV race best at Super Tour Mar 2023: 1:46.209 (Stevan Davis)FV race best at Super Tour Mar 2024: 1:43.556 (Andrew Whitston)FV race best at Super Tour Mar 2026: 1:46.101 (Donnie Isley)FV qualifying best at Super Tour Mar 2021: 1:43.710 (Andrew Whitston)FV qualifying best at Super Tour Mar 2022: 1:45.892 (Mitchell Ferguson)FV qualifying best at Super Tour Mar 2023: 1:46.374 (Mitchell Ferguson)FV qualifying best at Super Tour Mar 2024: 1:44.524 (Andrew Whitston)FV qualifying best at Super Tour Mar 2026: 1:45.061 (Donnie Isley)EP race best at Super Tour Mar 2021: 1:34.810 (Jesse Prather)EP race best at Super Tour Mar 2022: 1:37.312 (Peter Norton)EP race best at Super Tour Mar 2023: 1:38.368 (Peter Norton)EP race best at Super Tour Mar 2024: 1:36.768 (Peter Norton)EP race best at Super Tour Mar 2025: 1:34.415 (Peter Norton)EP race best at Super Tour Mar 2026: 1:36.085 (Peter Norton)EP qualifying best at Super Tour Mar 2021: 1:34.341 (Jesse Prather)EP qualifying best at Super Tour Mar 2022: 1:37.906 (Peter Norton)EP qualifying best at Super Tour Mar 2023: 1:39.027 (Peter Norton)EP qualifying best at Super Tour Mar 2024: 1:36.512 (Peter Norton)EP qualifying best at Super Tour Mar 2025: 1:35.116 (Peter Norton)EP qualifying best at Super Tour Mar 2026: 1:36.506 (Peter Norton)Super Tour Mar 2021Super Tour Mar2021Super Tour Mar 2022Super Tour Mar2022Super Tour Mar 2023Super Tour Mar2023Super Tour Mar 2024Super Tour Mar2024Super Tour Mar 2025Super Tour Mar2025Super Tour Mar 2026Super Tour Mar2026
P2SRFFVEPsolid race · dashed qualifying · slower is lower
98%100%102%104%106%108%110%112%114%116%118%120%122%124%126%128%130%132%43 rule changes between Super Tour Mar 2021 and Super Tour Mar 202243 ▾26 rule changes between Super Tour Mar 2022 and Super Tour Mar 202326 ▾30 rule changes between Super Tour Mar 2023 and Super Tour Mar 202430 ▾23 rule changes between Super Tour Mar 2024 and Super Tour Mar 202523 ▾23 rule changes between Super Tour Mar 2025 and Super Tour Mar 202623 ▾P2 race best at Super Tour Mar 2021: 100.0% of P2's (Lucian Pancea)P2 race best at Super Tour Mar 2022: 100.0% of P2's (Robert Iversen)P2 race best at Super Tour Mar 2023: 100.0% of P2's (Lucian Pancea)P2 race best at Super Tour Mar 2024: 100.0% of P2's (Sherman Chao)P2 qualifying best at Super Tour Mar 2021: 100.0% of P2's (Lucas Mann)P2 qualifying best at Super Tour Mar 2022: 100.0% of P2's (Robert Iversen)P2 qualifying best at Super Tour Mar 2023: 100.0% of P2's (Lucian Pancea)P2 qualifying best at Super Tour Mar 2024: 100.0% of P2's (Lucian Pancea)FV race best at Super Tour Mar 2021: 120.5% of P2's (Donnie Isley)FV race best at Super Tour Mar 2022: 127.4% of P2's (Stevan Davis)FV race best at Super Tour Mar 2023: 126.7% of P2's (Stevan Davis)FV race best at Super Tour Mar 2024: 120.1% of P2's (Andrew Whitston)FV qualifying best at Super Tour Mar 2021: 118.7% of P2's (Andrew Whitston)FV qualifying best at Super Tour Mar 2022: 126.0% of P2's (Mitchell Ferguson)FV qualifying best at Super Tour Mar 2023: 128.9% of P2's (Mitchell Ferguson)FV qualifying best at Super Tour Mar 2024: 124.1% of P2's (Andrew Whitston)EP race best at Super Tour Mar 2021: 110.1% of P2's (Jesse Prather)EP race best at Super Tour Mar 2022: 117.1% of P2's (Peter Norton)EP race best at Super Tour Mar 2023: 117.4% of P2's (Peter Norton)EP race best at Super Tour Mar 2024: 112.2% of P2's (Peter Norton)EP qualifying best at Super Tour Mar 2021: 107.9% of P2's (Jesse Prather)EP qualifying best at Super Tour Mar 2022: 116.5% of P2's (Peter Norton)EP qualifying best at Super Tour Mar 2023: 120.0% of P2's (Peter Norton)EP qualifying best at Super Tour Mar 2024: 114.6% of P2's (Peter Norton)Super Tour Mar 2021Super Tour Mar2021Super Tour Mar 2022Super Tour Mar2022Super Tour Mar 2023Super Tour Mar2023Super Tour Mar 2024Super Tour Mar2024Super Tour Mar 2025Super Tour Mar2025Super Tour Mar 2026Super Tour Mar2026
P2SRFFVEPsolid race · dashed qualifying · each class's best lap as a share of P2's at the same event (the reference class, changeable above); 100% is level, higher is quicker
EventP2SRFFVEP
Qual bestRace bestTrapQual bestRace bestTrapvs P2% of P2Qual bestRace bestTrapvs P2% of P2Qual bestRace bestTrapvs P2% of P2
Super Tour Mar 2026 ST26MAR062026-03-061:45.061Donnie Isley · fastest of 9 · top 5 within 5.0s+0.537s (+0.51%)1:46.101Donnie Isley · fastest of 9 · top 5 within 3.6s+2.545s (+2.46%)107.1Donnie Isley+4.9 mph (+4.8%)1:36.506Peter Norton · fastest of 4 · top 4 within 7.8s+1.390s (+1.46%)1:36.085Peter Norton · fastest of 4 · top 4 within 6.8s+1.670s (+1.77%)126.3Peter Norton-2.6 mph (-2.0%)
23 rule changes (SRF: 4, EP: 19)6 weight · 4 engine · 3 induction · 2 cars added · 6 wording · 2 other · SRF3 spark plugs limited to NGK LTR7IX-11 P/N G301041 only; washers and sealing rings prohibited. · EP BMW 325i/is E30 fuel injection throttle body specified as 60mm diameter. · EP Triumph TR2–TR4A may use 5-speed gearbox without overdrive; Weber carburetors and weight reference deleted. · EP BMW Z3 2.5L and other models get smaller restrictors, 50mm to 55mm, and Z3 2.5L weight rises 50 to 78 lbs. · EP Nissan 280Z minimum weight lowered to 2400 lbs, 2460 lbs with *, 2520 lbs with **. · EP Mazda MX-5 1.8L 90-97 minimum weight reduced to 2125 lbs. · HP Spec Lines Austin-Healey Sprite/Midget 1098cc minimum weight drops to 1550 lbs. · HP Volvo 142 P-1800 engine gains compression ratio limit 12.0:1 and valve lift limit .425 inch. · HP Mini DOHC 1.6 valve lift limit drops to .390" from .450". · FP and HP Volkswagen Rabbit descriptions updated to clarify Cabriolet body style inclusion. · EP, FP, HP: rear drum-to-disc brake conversion clarified; rotors solid, diameter limited to largest front rotor permitted. · EP Ford Mustang 94-98 fuel injected throttle body inside diameter set to 60. · HP Plymouth Arrow gains 4 or 5 speed transmission option specification. · Appendix G.2.3 clarifies rim width and diameter are absolute maximums; wording corrected from 'is' to 'are'. · EP, FP, HP throttle body inside dimensions and butterfly now allow +/-.25mm tolerance from stock. · SRF3 adds HD Oil Cooler P/N G1148500 option alongside standard P/N G480503, no fan permitted. · EP BMW Z4 03-05 gains 52mm flat plate intake restrictor. · EP Fiat 124 Spider Competition 1600 and 2000 minimum weight drops 50 lbs to 2000; carburetors now allow 36mm chokes instead of 34mm. · HP Fiat X-1/9 and Bertone 1500 minimum weights reduced to 1740 lbs, 1784 lbs, 1827 lbs; 1300 models to 1600, 1640, 1680 lbs; additional 1300 and 1500 specs to 2010, 1900 lbs. · Chevrolet Spark 16-22 classified in HP Pre at 1850 lbs base, 1896 lbs modified, 1943 lbs. · HP Ford Festiva 88-93 minimum weight lowered to 1600 lbs, competition weight to 1640, prepared weight to 1680; compression ratio raised to 11.0:1. · SRF drivers with disabilities may modify seat and controls for safety and comfort with SCCA approval, noted in logbook, for that driver only. · SRF SADEV-SRF3 6-speed sequential transmission: effective date clarified to 1 April 2025 onward.showhide
  • SRF SRF3 Spark Plugs #39899engineengineSRF3 spark plugs limited to NGK LTR7IX-11 P/N G301041 only; washers and sealing rings prohibited.
  • EP Request to Update E30 BMW Throttle Body Diameter Verbiage #39363wordingwordingEP BMW 325i/is E30 fuel injection throttle body specified as 60mm diameter.
  • EP TR2 Notes E&O #39180wordingwordingEP Triumph TR2–TR4A may use 5-speed gearbox without overdrive; Weber carburetors and weight reference deleted.
  • EP Balance of Power #39187induction +50 lbsslower · inductionEP BMW Z3 2.5L and other models get smaller restrictors, 50mm to 55mm, and Z3 2.5L weight rises 50 to 78 lbs.
  • EP Please Lower Weight of 280Z #38871weight -160 lbsfaster · weightEP Nissan 280Z minimum weight lowered to 2400 lbs, 2460 lbs with *, 2520 lbs with **.
  • EP Miata Weight Adjustment Follow Up #38949weight -25 lbsfaster · weightEP Mazda MX-5 1.8L 90-97 minimum weight reduced to 2125 lbs.
  • EP Weight Break for 1098 Midget / Sprite #38970weight -80 lbsfaster · weightHP Spec Lines Austin-Healey Sprite/Midget 1098cc minimum weight drops to 1550 lbs.
  • EP HP Volvo 142 spec omission #38994engineslower · engineHP Volvo 142 P-1800 engine gains compression ratio limit 12.0:1 and valve lift limit .425 inch.
  • EP HP Mini DOHC 1.6 #38996engineslower · engineHP Mini DOHC 1.6 valve lift limit drops to .390" from .450".
  • EP Add to Rabbit description #39019wordingwordingFP and HP Volkswagen Rabbit descriptions updated to clarify Cabriolet body style inclusion.
  • EP Clean-up 9.1.5.E.7e #39025otherotherEP, FP, HP: rear drum-to-disc brake conversion clarified; rotors solid, diameter limited to largest front rotor permitted.
  • EP Add TB size to Ford Mustang (94-98) Spec Line #39130inductionadded · inductionEP Ford Mustang 94-98 fuel injected throttle body inside diameter set to 60.
  • EP HP Plymouth Arrow spec omission #38995cars addedaddedHP Plymouth Arrow gains 4 or 5 speed transmission option specification.
  • EP Add Wheel Diameter to Appendix G #39008wordingwordingAppendix G.2.3 clarifies rim width and diameter are absolute maximums; wording corrected from 'is' to 'are'.
  • EP Add TB ID tolerance to general Prod rules #39009wordingaddedEP, FP, HP throttle body inside dimensions and butterfly now allow +/-.25mm tolerance from stock.
  • SRF Add HD Oil Cooler #38979engineadded · engineSRF3 adds HD Oil Cooler P/N G1148500 option alongside standard P/N G480503, no fan permitted.
  • EP BMW Z4 update #38490inductionslower · inductionEP BMW Z4 03-05 gains 52mm flat plate intake restrictor.
  • EP EP Fiat 124 Spider Competition Adjustment Request #38498weight -50 lbsfaster · weightEP Fiat 124 Spider Competition 1600 and 2000 minimum weight drops 50 lbs to 2000; carburetors now allow 36mm chokes instead of 34mm.
  • EP Base Weight Adjustment for H-Production X1/9 Spec Lines #38255weight -50 lbsfaster · weightHP Fiat X-1/9 and Bertone 1500 minimum weights reduced to 1740 lbs, 1784 lbs, 1827 lbs; 1300 models to 1600, 1640, 1680 lbs; additional 1300 and 1500 specs to 2010, 1900 lbs.
  • EP Request for Classification of Chevrolet Spark #37755cars addedaddedChevrolet Spark 16-22 classified in HP Pre at 1850 lbs base, 1896 lbs modified, 1943 lbs.
  • EP Request to Lower Ford Festiva Minimum Weight to 1600 LBS #37939weight -100 lbsfaster · weightHP Ford Festiva 88-93 minimum weight lowered to 1600 lbs, competition weight to 1640, prepared weight to 1680; compression ratio raised to 11.0:1.
  • SRF Driver Safety & Comfort #37966otheraddedSRF drivers with disabilities may modify seat and controls for safety and comfort with SCCA approval, noted in logbook, for that driver only.
  • SRF Update SADEV transmission specs #37992wordingwordingSRF SADEV-SRF3 6-speed sequential transmission: effective date clarified to 1 April 2025 onward.
Super Tour Mar 2025 ST25MAR072025-03-071:35.116Peter Norton · fastest of 6 · top 5 within 7.5s-1.396s (-1.45%)1:34.415Peter Norton · fastest of 6 · top 5 within 5.3s-2.353s (-2.43%)129.0Bill Miller+4.9 mph (+3.9%)
23 rule changes (P2: 3, SRF: 6, FV: 1, EP: 13)4 weight · 3 cars added · 3 induction · 1 engine · 1 suspension & brakes · 1 tyres & wheels · 9 wording · 1 other · EP BMW Z3 2.5L, Z3 2.8L, 328i E36/E46, 325i E36/E46 intake restrictors reduced 4mm each, to 52–58mm. · EP, FP, HP may use any interior or exterior mirror meeting rule 9.3.36. · EP Honda S2000 1997cc minimum weight drops 75 lbs to 2375; 2157cc drops 60 lbs to 2450. · EP Mazda MX-5 Miata 99-05 minimum weight reduced to 2100 lbs, 2153 lbs with power, 2205 lbs modified. · EP BMW models now require flat plate intake restrictors: Z3 2.5L 52mm, Z3 2.8L 55mm, 328i E36 58mm, 328i/ci E46 58mm, 325i E46 56mm, 325i E36 56mm, 325is M-Technic 56mm. · EP BMW 325i/is E30 84-91 weight reduced to 2150 lbs base, 2204 lbs with turbo, 2258 lbs supercharged. · EP Triumph GT6 switches to three Weber 40 DCOE carburetors with 28mm chokes, weight rises to 1990 lbs. · P2 2000 cc Pinto engine car minimum weight set to 1335 lbs. · HP 1275 Spridget compression ratio raised to 12.0:1; 1098cc also raised to 12.0:1. · EP Miata 1.6L, 1.8L 90–97, and 94–97 track width corrected to 1516/1534 mm (59.7/60.4 in.) front and rear. · FV ferrous rotor must not be cross-drilled; pad cleaning grooves limit unchanged at three per side. · SRF3 air filter rule removes K&N RC-9160 option, specifies Weems P/N WM301020 only. · SRF Wilwood vented rotor minimum thickness increases to 13.25mm, 0.522 inches. · SRF3 Hoosier decal placement changed from four logos on nose and tail to three logos on sides and center front. · FE and SRF protest fee rules redirected to GCR section 8.3.1.D for fees and procedure. · SRF Hoosier contingency decal requirement reduced from four decals in specific locations to three decals with simplified placement. · HP Volkswagen Golf and Jetta 85-92 track correction: front 1537 mm (60.5 in.), rear 1529 mm (60.2 in.). · SRF wet tyres: front P185/60R13 H20 or W2 and rear P205/60R13 H20 or W2 removed; front P185/65R13 W2 and rear P205/60R13 W2 now required. Hoosier decal placement specified. · Nissan 300ZX 84–89 added to EP, 2550–2678 lbs, 2960 cc SOHC, fuel injection, 12.0:1 compression, 0.500" valve lift limit. · Mazda RX-7 92-97 added to EP Prep as Level 2 rotary 13B 6-port, 2200–2310 lbs, carb or fuel injection, 42 mm choke. · EP Mazda RX-8 (04-11) alternate spec line removed; single spec line retained. · P2 Spec Line E engine notes clarify oil system, ECU, and exhaust remain unrestricted; wording only. · P2 FIA Group CN notes clarify V de V European Proto Endurance Challenge bodywork, rear diffuser, wing, wheels, assisted shifting allowed; regulations link provided.showhide
  • EP Request Competition Adjustment to BMW Z3 2.5L #37120inductionslower · inductionEP BMW Z3 2.5L, Z3 2.8L, 328i E36/E46, 325i E36/E46 intake restrictors reduced 4mm each, to 52–58mm.
  • EP Interpretation of Production Rules on Mirrors #37235wordingaddedEP, FP, HP may use any interior or exterior mirror meeting rule 9.3.36.
  • EP Weight Reduction for Honda S2000 #37466weightfaster · weightEP Honda S2000 1997cc minimum weight drops 75 lbs to 2375; 2157cc drops 60 lbs to 2450.
  • EP Mazda 1999 Miata 1.8L #37488weight -50 lbsfaster · weightEP Mazda MX-5 Miata 99-05 minimum weight reduced to 2100 lbs, 2153 lbs with power, 2205 lbs modified.
  • EP Effective date for Jan 2025 GCR updates #37654inductionslower · inductionEP BMW models now require flat plate intake restrictors: Z3 2.5L 52mm, Z3 2.8L 55mm, 328i E36 58mm, 328i/ci E46 58mm, 325i E46 56mm, 325i E36 56mm, 325is M-Technic 56mm.
  • EP Request to Reduce Weight of BMW 325i/is E30 (84-91) Spec Line #37119weight -50 lbsfaster · weightEP BMW 325i/is E30 84-91 weight reduced to 2150 lbs base, 2204 lbs with turbo, 2258 lbs supercharged.
  • EP Triumph GT6 Adjustments #37112inductionfaster · inductionEP Triumph GT6 switches to three Weber 40 DCOE carburetors with 28mm chokes, weight rises to 1990 lbs.
  • P2 2000 cc Pinto Engine Car Weight #37187weightslower · weightP2 2000 cc Pinto engine car minimum weight set to 1335 lbs.
  • EP 1275 HP Spridget Level 2 Only #36518enginefaster · engineHP 1275 Spridget compression ratio raised to 12.0:1; 1098cc also raised to 12.0:1.
  • EP NA Miata Track Width Correction #36902otherotherEP Miata 1.6L, 1.8L 90–97, and 94–97 track width corrected to 1516/1534 mm (59.7/60.4 in.) front and rear.
  • FV Disc Brakes #36822wordingwordingFV ferrous rotor must not be cross-drilled; pad cleaning grooves limit unchanged at three per side.
  • SRF Update SRF3 Air Filter Rule #36681wordingremovedSRF3 air filter rule removes K&N RC-9160 option, specifies Weems P/N WM301020 only.
  • SRF Update SRF Brake Rotor Thickness #36687suspension & brakessuspension & brakesSRF Wilwood vented rotor minimum thickness increases to 13.25mm, 0.522 inches.
  • SRF Hoosier Tire Decal Placement #36739wordingwordingSRF3 Hoosier decal placement changed from four logos on nose and tail to three logos on sides and center front.
  • SRF Protest Fee Clarification #36540wordingwordingFE and SRF protest fee rules redirected to GCR section 8.3.1.D for fees and procedure.
  • SRF Update to Letter 36619 with new Hoosier Contingency Decal Info #36624wordingwordingSRF Hoosier contingency decal requirement reduced from four decals in specific locations to three decals with simplified placement.
  • EP Errant entry in HP production line item #36231wordingwordingHP Volkswagen Golf and Jetta 85-92 track correction: front 1537 mm (60.5 in.), rear 1529 mm (60.2 in.).
  • SRF Update Rain Tire Rule and Hoosier Decal Placement #36436tyres & wheelstyres & wheelsSRF wet tyres: front P185/60R13 H20 or W2 and rear P205/60R13 H20 or W2 removed; front P185/65R13 W2 and rear P205/60R13 W2 now required. Hoosier decal placement specified.
  • EP NIssan 300ZX Z31 to EP #35830cars addedaddedNissan 300ZX 84–89 added to EP, 2550–2678 lbs, 2960 cc SOHC, fuel injection, 12.0:1 compression, 0.500" valve lift limit.
  • EP RX7 1993 and Up Request In EP Spec Lines, classify #36031cars addedaddedMazda RX-7 92-97 added to EP Prep as Level 2 rotary 13B 6-port, 2200–2310 lbs, carb or fuel injection, 42 mm choke.
  • EP Clean-up Multiple EP RX-8 Spec Lines In EP #36156cars addedremoved · cars addedEP Mazda RX-8 (04-11) alternate spec line removed; single spec line retained.
  • P2 CN Spec ECU #35835wordingwordingP2 Spec Line E engine notes clarify oil system, ECU, and exhaust remain unrestricted; wording only.
  • P2 E&O - Correct FIA Group CN spec line notes #35900wordingwordingP2 FIA Group CN notes clarify V de V European Proto Endurance Challenge bodywork, rear diffuser, wing, wheels, assisted shifting allowed; regulations link provided.
Super Tour Mar 2024 ST24MAR082024-03-081:24.228Lucian Pancea · fastest of 4 · top 4 within 5.2s+1.695s (+2.05%)1:26.233Sherman Chao · fastest of 4 · top 4 within 17.9s+2.429s (+2.90%)134.0Lucian Pancea-12.5 mph (-8.5%)1:44.524Andrew Whitston · fastest of 12 · top 5 within 3.0s-1.850s (-1.74%)1:43.556Andrew Whitston · fastest of 12 · top 5 within 1.3s-2.653s (-2.50%)102.2Andrew Whitston-6.3 mph (-5.8%)+17.323squal +20.296s120.1%qual 124.1%1:36.512Peter Norton · fastest of 6 · top 5 within 5.2s-2.515s (-2.54%)1:36.768Peter Norton · fastest of 6 · top 5 within 5.2s-1.600s (-1.63%)124.1Doug Piner-11.9 mph (-8.8%)+10.535squal +12.284s112.2%qual 114.6%
30 rule changes (P2: 7, SRF: 6, FV: 1, EP: 16)7 weight · 4 engine · 2 induction · 2 removed · 2 suspension & brakes · 2 tyres & wheels · 8 wording · 3 other · HP removes four redundant VW spec lines: Rabbit Cabriolet 1780, Scirocco 1588, Scirocco 1780 8-valve 83-88, Scirocco 1588. · HP Honda Civic 1.5 1988-91 minimum weight drops 70 lbs to 2175; also 2-speed and 3-speed minimums cut 72 and 73 lbs. · EP BMW Z3 2.5L minimum weight increased to 2500 lbs, 2563 lbs with power adder, 2625 lbs with two power adders. · EP Mazda MX-5 1.8L (90-97) minimum weight cut to 2150 lbs; (94-97) variants to 2000, 2050, 2100 lbs. · EP Triumph GT6 dual 1.75-inch carburetors weight rises to 1940 lbs; triple Weber 40 DCOE option added at 1990 lbs. · EP Honda S2000 fuel injected throttle body inside diameter increases from 62mm to 64mm. · EP Triumph TR8 dry sump allowance moved from Carburetor line to Notes. · EP Porsche 944/924S 2.5L and 2.7L minimum weights corrected: 2479cc to 2306–2363 lbs, 2681cc to 2358–2415 lbs. · P2 AMAC and related cars: clarified B.1 modified engine range to 2008 and older stock engines only, with 38mm restrictor and 1025 lbs minimum weight. · P2 Suzuki GSX-R1000 engine: 2007–2008 crankcase 11300-21860 may be replaced with 2016–2019 GSX-S1000 part 11301-04840. · SRF rain/brake light must be Super Bright LEDs Inc. P/N PT-STRB-R24; secondary filament must connect to rain light switch. · SRF brake light must be Super Bright LEDs Inc. P/N PT-STRB-R24, with SCCA Enterprises P/N 180427A pigtail and strobing rain light kit. · SRF adds mandatory front brake ducts 12–36 inches, throttle pedal heel-toe extension, braided stainless flex lines, camber limit 5.0 degrees, radiator opening height 3½ ± ½ inches, rear shift cable clamp P/N WM302007A. · EP Porsche 944/924S combines 2.5L and 2.7L variants (83-89), raises weight to 2250–2415 lbs, allows 2681cc displacement. · EP Triumph GT6 minimum weight drops to 1800 lbs. · FV front wheel bearings wording clarified; specification unchanged. · P2 Table 1 engine date ranges clarified: Stock Engine replaced with specific marques Suzuki, Yamaha, Honda, BMW for 2009-newer and 2008-older rows. · SRF radiator options expanded: Enterprises P/N 480465 with baffle 480464, 480466, or Automotive 1R698 and CU698 allowed if cross-reference equivalent. · EP Triumph TR8 78-81 removes allowance for alternate front hubs of same external dimensions and weight. · EP Triumph GT6 carburetor type changes from SU or Stromberg to Auto-type, quantity two 1.5 inch. · EP Triumph GT6 Brakes Alt. now permits TR-6 standard or alternate calipers and discs. · FP and HP Sprite and Spitfire 1500 intake valve size corrected to 36.6 mm, removing prior decimal specifications. · EP Porsche 914-6 2.0L intake valve increased to 2.0 mm, exhaust valve corrected to 38.0 mm. · SRF wet front tyre changes to Hoosier P/N 46100 P185/60R13 H20 or W2 with 2.5" ground clearance. · P2 minimum side body height must equal front axle centerline height, viewed from side. · P2 closed cockpit single seat cars now prohibited unless Table 1 spec line permits. · SRF front W2 rain tyre Hoosier part number changes from 46100 to 46101 P185/65R13. · EP BMW Z3 2.5L flat plate intake restrictor reduced from 58mm to 56mm, both throttle bodies. · P2 engine table spec line B.1 redundant effective date language removed and table updated. · P2 motorcycle restrictor reduced 35mm to 34mm for 2011+ Kawasaki; minimum weights increased to 1100 lbs for 2009+ engines; cockpit length corrected to 23.622 inches.showhide
  • EP GCR Correction - Redundant HP Spec Lines #35623removedremovedHP removes four redundant VW spec lines: Rabbit Cabriolet 1780, Scirocco 1588, Scirocco 1780 8-valve 83-88, Scirocco 1588.
  • EP Update 1988-1991 Civic to Match 1988-1991 CRX #35399weightfaster · weightHP Honda Civic 1.5 1988-91 minimum weight drops 70 lbs to 2175; also 2-speed and 3-speed minimums cut 72 and 73 lbs.
  • EP Request to Review Z3 2.5 Spec Line #35073weight +50 lbsslower · weightEP BMW Z3 2.5L minimum weight increased to 2500 lbs, 2563 lbs with power adder, 2625 lbs with two power adders.
  • EP Miata Alternate Head #35253weight -50 lbsfaster · weightEP Mazda MX-5 1.8L (90-97) minimum weight cut to 2150 lbs; (94-97) variants to 2000, 2050, 2100 lbs.
  • EP Triumph GT6 Adjustments #35255weightslower · weightEP Triumph GT6 dual 1.75-inch carburetors weight rises to 1940 lbs; triple Weber 40 DCOE option added at 1990 lbs.
  • EP Honda S2000 throttle body #35272inductionfaster · inductionEP Honda S2000 fuel injected throttle body inside diameter increases from 62mm to 64mm.
  • EP Correction within Triumph TR8 Spec Line #35315wordingwordingEP Triumph TR8 dry sump allowance moved from Carburetor line to Notes.
  • EP Correction to EP 924S/944 Spec Line #35317weightweightEP Porsche 944/924S 2.5L and 2.7L minimum weights corrected: 2479cc to 2306–2363 lbs, 2681cc to 2358–2415 lbs.
  • P2 E&O - Clarify B.1 modified engine range in AMAC spec lines #35225wordingwordingP2 AMAC and related cars: clarified B.1 modified engine range to 2008 and older stock engines only, with 38mm restrictor and 1025 lbs minimum weight.
  • P2 Replacement Engine Crankcase for 07/08 Suzuki GSX-R1000 Engines #35340engineadded · engineP2 Suzuki GSX-R1000 engine: 2007–2008 crankcase 11300-21860 may be replaced with 2016–2019 GSX-S1000 part 11301-04840.
  • SRF Update SRF Rain / Brake Rule #34706otherotherSRF rain/brake light must be Super Bright LEDs Inc. P/N PT-STRB-R24; secondary filament must connect to rain light switch.
  • SRF Update SRF Brake Light Rule v1 #34853otherotherSRF brake light must be Super Bright LEDs Inc. P/N PT-STRB-R24, with SCCA Enterprises P/N 180427A pigtail and strobing rain light kit.
  • SRF SRF / SRF3 Rule Updates #35268suspension & brakessuspension & brakesSRF adds mandatory front brake ducts 12–36 inches, throttle pedal heel-toe extension, braided stainless flex lines, camber limit 5.0 degrees, radiator opening height 3½ ± ½ inches, rear shift cable clamp P/N WM302007A.
  • EP Porsche 944/924S Rule Change Request #35002weightslower · weightEP Porsche 944/924S combines 2.5L and 2.7L variants (83-89), raises weight to 2250–2415 lbs, allows 2681cc displacement.
  • EP Triumph GT6 Adjustments #35054weight -30 lbsfaster · weightEP Triumph GT6 minimum weight drops to 1800 lbs.
  • FV FV Wheel Bearing Clarification #35150wordingwordingFV front wheel bearings wording clarified; specification unchanged.
  • P2 Correct Table 1 for Engine Date Range Specifications #35182wordingwordingP2 Table 1 engine date ranges clarified: Stock Engine replaced with specific marques Suzuki, Yamaha, Honda, BMW for 2009-newer and 2008-older rows.
  • SRF SRF Radiator Rule Update #34805otheraddedSRF radiator options expanded: Enterprises P/N 480465 with baffle 480464, 480466, or Automotive 1R698 and CU698 allowed if cross-reference equivalent.
  • EP Hub Note Clean Up In EP TR8 Spec Line #34649removedremovedEP Triumph TR8 78-81 removes allowance for alternate front hubs of same external dimensions and weight.
  • EP Triumph GT6 Adjustments #34662engineengineEP Triumph GT6 carburetor type changes from SU or Stromberg to Auto-type, quantity two 1.5 inch.
  • EP Triumph GT6 Adjustments: Brakes #34663suspension & brakesadded · suspension & brakesEP Triumph GT6 Brakes Alt. now permits TR-6 standard or alternate calipers and discs.
  • EP Correct Intake Valve Size on 1500cc Midget/Spitfire #34419wordingwordingFP and HP Sprite and Spitfire 1500 intake valve size corrected to 36.6 mm, removing prior decimal specifications.
  • EP 914-6 Valve Size Correction #34185enginefaster · engineEP Porsche 914-6 2.0L intake valve increased to 2.0 mm, exhaust valve corrected to 38.0 mm.
  • SRF Hoosier SRF Wet Front Tire Rule Update #34189tyres & wheelstyres & wheelsSRF wet front tyre changes to Hoosier P/N 46100 P185/60R13 H20 or W2 with 2.5" ground clearance.
  • P2 Clarify minimum side body height requirement #34143wordingwordingP2 minimum side body height must equal front axle centerline height, viewed from side.
  • P2 Clarify closed cockpit single seat car allowance #34144wordingwordingP2 closed cockpit single seat cars now prohibited unless Table 1 spec line permits.
  • SRF Update SRF Front W2 Rain Tire Part Number #34118tyres & wheelstyres & wheelsSRF front W2 rain tyre Hoosier part number changes from 46100 to 46101 P185/65R13.
  • EP Investigate Parity of Z3 #33343inductionslower · inductionEP BMW Z3 2.5L flat plate intake restrictor reduced from 58mm to 56mm, both throttle bodies.
  • P2 Remove redundant effective date language and update engine table #34012wordingwordingP2 engine table spec line B.1 redundant effective date language removed and table updated.
  • P2 E&O - Correct dimensional equivalents #34038enginefaster · engineP2 motorcycle restrictor reduced 35mm to 34mm for 2011+ Kawasaki; minimum weights increased to 1100 lbs for 2009+ engines; cockpit length corrected to 23.622 inches.
Super Tour Mar 2023 ST23MAR102023-03-101:22.533Lucian Pancea · fastest of 4 · top 4 within 4.2s-1.480s (-1.76%)1:23.804Lucian Pancea · fastest of 4 · top 4 within 4.6s+0.733s (+0.88%)146.5Lucian Pancea-3.5 mph (-2.4%)1:46.374Mitchell Ferguson · fastest of 6 · top 5 within 3.0s+0.482s (+0.46%)1:46.209Stevan Davis · fastest of 6 · top 5 within 1.3s+0.338s (+0.32%)108.5Russell Fredericks+2.5 mph (+2.4%)+22.405squal +23.841s126.7%qual 128.9%1:39.027Peter Norton · fastest of 7 · top 5 within 4.9s+1.121s (+1.14%)1:38.368Peter Norton · fastest of 7 · top 5 within 5.7s+1.056s (+1.09%)136.0David Spillman+2.3 mph (+1.7%)+14.564squal +16.494s117.4%qual 120.0%
26 rule changes (P2: 7, SRF: 3, EP: 16)5 cars added · 3 engine · 2 weight · 1 aero · 1 induction · 11 wording · 3 other · SRF removes 1985 Renault Alliance solid front rotor option; restrictor sizes decrease 1mm for newer Kawasaki and multi-brand engines; minimum weights increase to 1100 lbs. · EP 79-85 RX-7 brake hub and rotor spec removed; 13B rotor housing and housing options now permitted. · EP Nissan 280Z carburetor option clarified: Hitachi-SU 1bbl 46mm throttle bores or fuel injection permitted. · EP Mazda RX-2, RX-3, RX-3SP, RX-7 12A gain 2 bbl fuel injected throttle body option; RX-7 13B gains fuel injected throttle body and stock fuel injection. · EP Mazda RX-2, RX-3, RX-3SP lose 50–52 lbs; RX-4 loses 50–52 lbs across all specs. · EP Triumph TR8 78-81 now allowed dry sump installation. · EP, FP, HP port matching limited to 1 inch depth from mating surface. · EP Prep adds Nissan 280ZX (79-83) at 2425–2546 lbs with 2760cc SOHC six, fuel injection, 12.0:1 compression limit, 0.500" valve lift limit. · Sebeco NP01-EVO and Elan NP01 added to P2 with Mazda 2.0L MZR, no restrictor required, 1600 lb minimum weight. · P2 Radical SR3/SR4, Cup, Club Sport, Pro-Sport, PR6: assisted shifting clarified from A-assisted to Aassisted; Cup engine restrictor changed from Unrestricted to Not required. · P2 chassis now allows composite materials partially installed; anti-intrusion panels attachment simplified; Stohr and converted models clarified. · Volkswagen New Beetle 2.5L 5-cyl DOHC classified in EP at 2400–2520 lbs with fuel injection. · EP Mazda RX-7 12A/13B and 13B now permit 2 bbl fuel injected throttle body with 42mm chokes on dual-y manifold. · EP VW Corrado 92-95 stroke corrected to 90.3 mm and displacement to 2792 cc. · EP Subaru BRZ title updated to include model years 13–20; Toyota 86/Scion FR-S title likewise updated to 13–20. · SRF tire rule wording clarified: tires must be run as delivered. · SRF brake rotor minimum thickness reduced from 13.25 mm to 12.20 mm; seals and air filter specs clarified. · EP Mazda MX-5 Global Cup 16-22 minimum weight set to 2400 lbs; sequential gearbox allowed with 150 lbs penalty. · BMW 128i (08-13) classified in EP at 2700 lbs minimum with 2996 cc engine, stock throttle body, 11.0:1 compression and 0.400" valve lift limits. · EP, FP, HP open cars now allow carbon fiber hardtops if they retain OEM exterior profiles. · P2 chassis construction clarified: full composite allowed; partial composite must roll without composite parts installed. · P2 classification wording cleaned up in GCR section 9.1.8.C and GCR contents. · EP Mazda RX-8 13B carburetor option replaced with fuel-injected throttle body or stock fuel injection. · EP, FP, HP Production clarify idle control valve options: stock original allowed, removable with blocked ports, or mechanical replaced with electronic stock type. · P2 Oldsmobile cam rules correct spelling from 'after market' to 'aftermarket' in two sections.showhide
  • SRF Update SRF Brake Rule #33469enginefaster · engineSRF removes 1985 Renault Alliance solid front rotor option; restrictor sizes decrease 1mm for newer Kawasaki and multi-brand engines; minimum weights increase to 1100 lbs.
  • EP Revise 79-85 RX7 Brake Spec Line Allowance #33293otherotherEP 79-85 RX-7 brake hub and rotor spec removed; 13B rotor housing and housing options now permitted.
  • EP Request alternate carburetors for EP 280z #33405wordingwordingEP Nissan 280Z carburetor option clarified: Hitachi-SU 1bbl 46mm throttle bores or fuel injection permitted.
  • EP Fuel Injection 12a Mazda RX3 #33434cars addedaddedEP Mazda RX-2, RX-3, RX-3SP, RX-7 12A gain 2 bbl fuel injected throttle body option; RX-7 13B gains fuel injected throttle body and stock fuel injection.
  • EP Mazda RX3 - Weight Reduction #33436weight -50 lbsfaster · weightEP Mazda RX-2, RX-3, RX-3SP lose 50–52 lbs; RX-4 loses 50–52 lbs across all specs.
  • EP Request TR8 Dry Sump Allowance #33460otheraddedEP Triumph TR8 78-81 now allowed dry sump installation.
  • EP Review Limited Prep Port Matching Rules #33600wordingwordingEP, FP, HP port matching limited to 1 inch depth from mating surface.
  • EP 280ZX Classification Request #33611cars addedaddedEP Prep adds Nissan 280ZX (79-83) at 2425–2546 lbs with 2760cc SOHC six, fuel injection, 12.0:1 compression limit, 0.500" valve lift limit.
  • P2 Request to Classify Sebeco NP01 #33378cars addedaddedSebeco NP01-EVO and Elan NP01 added to P2 with Mazda 2.0L MZR, no restrictor required, 1600 lb minimum weight.
  • P2 Radical spec line clarifications #33485wordingwordingP2 Radical SR3/SR4, Cup, Club Sport, Pro-Sport, PR6: assisted shifting clarified from A-assisted to Aassisted; Cup engine restrictor changed from Unrestricted to Not required.
  • P2 E&O original class intent #33519wordingwordingP2 chassis now allows composite materials partially installed; anti-intrusion panels attachment simplified; Stohr and converted models clarified.
  • P2 Update Engine Table Spec Line B.1 #33608engine
  • EP Request to classify VW New Beetle 2.5L in EP #32725cars addedaddedVolkswagen New Beetle 2.5L 5-cyl DOHC classified in EP at 2400–2520 lbs with fuel injection.
  • EP Request Rotary Injection on Dual Y manifold #32775inductionadded · inductionEP Mazda RX-7 12A/13B and 13B now permit 2 bbl fuel injected throttle body with 42mm chokes on dual-y manifold.
  • EP Request for Corrado Stroke & Displacement Correction #32985wordingwordingEP VW Corrado 92-95 stroke corrected to 90.3 mm and displacement to 2792 cc.
  • EP Subaru BRZ Model Years #32500wordingwordingEP Subaru BRZ title updated to include model years 13–20; Toyota 86/Scion FR-S title likewise updated to 13–20.
  • SRF SRF Tire Rule Update #32614wordingwordingSRF tire rule wording clarified: tires must be run as delivered.
  • SRF Brake, seal, and air filter clarifications #32670otherfasterSRF brake rotor minimum thickness reduced from 13.25 mm to 12.20 mm; seals and air filter specs clarified.
  • EP EP MX-5 Global Cup Car #32218weightweightEP Mazda MX-5 Global Cup 16-22 minimum weight set to 2400 lbs; sequential gearbox allowed with 150 lbs penalty.
  • EP Please Class BMW 128i in EP #32370cars addedaddedBMW 128i (08-13) classified in EP at 2700 lbs minimum with 2996 cc engine, stock throttle body, 11.0:1 compression and 0.400" valve lift limits.
  • EP Inconsistency in Body Work Descriptions #32396aeroadded · aeroEP, FP, HP open cars now allow carbon fiber hardtops if they retain OEM exterior profiles.
  • P2 E&O Clarification of Chassis Construction Requirements #32469wordingwordingP2 chassis construction clarified: full composite allowed; partial composite must roll without composite parts installed.
  • P2 Clean up P2 wording #32525wordingwordingP2 classification wording cleaned up in GCR section 9.1.8.C and GCR contents.
  • EP Mazda RX8 with 13b Rotary #32170engineengineEP Mazda RX-8 13B carburetor option replaced with fuel-injected throttle body or stock fuel injection.
  • EP Request Idle control valve clarification #32178wordingwordingEP, FP, HP Production clarify idle control valve options: stock original allowed, removable with blocked ports, or mechanical replaced with electronic stock type.
  • P2 After Market to Aftermarket #32373wordingwordingP2 Oldsmobile cam rules correct spelling from 'after market' to 'aftermarket' in two sections.
Super Tour Mar 2022 ST22MAR122022-03-121:24.013Robert Iversen · fastest of 6 · top 5 within 3.1s-3.393s (-3.88%)1:23.071Robert Iversen · fastest of 6 · top 5 within 4.0s-3.049s (-3.54%)150.1Robert Iversen+13.2 mph (+9.6%)1:45.892Mitchell Ferguson · fastest of 8 · top 5 within 3.5s+2.182s (+2.10%)1:45.871Stevan Davis · fastest of 8 · top 5 within 3.3s+2.124s (+2.05%)106.0Jeffrey Filipkowski-2.0 mph (-1.9%)+22.800squal +21.879s127.4%qual 126.0%1:37.906Peter Norton · fastest of 6 · top 5 within 13.0s+3.565s (+3.78%)1:37.312Peter Norton · fastest of 6 · top 5 within 6.1s+2.502s (+2.64%)133.7Doug Piner-6.5 mph (-4.7%)+14.241squal +13.893s117.1%qual 116.5%
43 rule changes (P2: 13, SRF: 5, FV: 4, EP: 21)8 cars added · 7 engine · 4 weight · 2 induction · 2 tyres & wheels · 1 suspension & brakes · 15 wording · 4 other · EP BMW Z3 2.5L intake restrictor reduced from 59mm to 58mm flat plate. · Ford Mustang 94-98 weight reduced to 2550/2614/2678 lbs; 99-03 3.8L classified EP at 2700/2768/2835 lbs. · EP, FP, HP Improved Touring cars may use any DOT-approved tyre as defined by 9.3.45. · FV connecting rod options expanded to include BrianCrower part BC6417 and Newland Group part 4M113077. · FV connecting rods minimum weight 425.0 grams, center-to-center length 130 +0.10/-0.25 mm; Crower, BrianCrower, Newland Group parts allowed if meeting specs. · P2 adds Beasley B2 at 1350 lbs with Mazda 12A, 40.5mm venturi, and up to 16.5in wing chord. · P2 wings: terminology change from 'cord' to 'chord', and 'only' removed from Bobsy and Jondal notes. · P2 Converted F5 cars renamed F500, must retain F500 suspension, minimum width 55 inches. · EP, FP, HP: stock/original idle control devices permitted unmodified or completely removed with openings blocked. · EP Porsche 968 (92-95) now allowed to run dry sump. · EP 1979-1985 Mazda RX-7 12A and 13B minimum weights cut 50–53 lbs across all spec lines. · P2 motorcycle engines gain 5cc to 1505cc max, two-stroke gains 5cc to 1205cc max, automotive engines add 50 lbs minimum weight to 1350 lbs. · EP Porsche 968 intake valve size changes to 39.0 mm, 1.54 mm seat width. · EP, FP, HP front-wheel-drive cars may alter body and subframes to install alternate axle shaft, matching RWD freedom. · EP BMW Z3 2.5L adds alternate throttle body option with Turner adapter and permits head casting 1738400. · FV Crower connecting rods SP93280B and BC6417 allowed as direct replacement, must meet OEM minimum weight. · P2 Control Area definition clarified: rectangular zone from rear edge of front tires to front edge of rear tires, full car width. · EP Porsche 944S2 89-91 requires 56mm flat plate intake restrictor; compression ratio 12.0:1 max, valve lift 0.500" max, dry sump allowed. · Toyota Corolla GTS RWD (84-87) and FX16 FWD (87-88) added to HP; old Corolla (84-87) removed. · FV allows Crower SP93280B and Brian Crower Racing Rods connecting rods as direct replacements, matching OEM minimum weight. · P2 specification line B.1 engine table entry amended; details of change not provided in excerpt. · P2 Control Area definition clarified: rear tire edge and front tire edge bounds, car's lower surface width, floor extensions and aerodynamic attachments included, vertical structures prohibited. · SRF wet tyres front P185/65R13 W2 option added; air box clarified as-delivered; SRF3 restrictor plate G301048 mandatory Jan 1 2022; P2 motorcycle engines up to 1005cc with 35mm restrictor, 2009+ stock 1075 lbs, 2008 stock 1025 lbs, modifie… · Toyota MR-2 1.6L 85-89 HP track width corrected to 15×47 / 15×47 inches; stock track baseline now 103% plus 2.5 inches. · P2 CN Honda K20A-FD2 engine rebuild clarified: balancing, porting, polishing prohibited; valve jobs and honing must follow factory procedures. · EP Honda S2000 now allows F22c engine in 1997cc and 2157cc displacements with revised weight brackets and specifications. · EP Nissan 240-SX S13/S14 weight drops to 2400 lbs base, 2460 turbo, 2520 supercharged; comp ratio raised to 12.0:1, valve lift to 0.500 inch. · P2 Converted F5 cars must retain F5 suspension and meet P2 non-spec requirements except minimum width is 55 inches. · P2 minimum body width clarified: cannot extend inward beyond vertical plane through tire centerlines. · SRF wet tyres add Hoosier W2 option alongside existing H20 from October 4, 2021. · SRF adds SADEV-SRF3 6-speed sequential transmission option with ratios 3.0–0.92:1 and 3.20 final drive. · SRF seal requirements clarified: seals now must be on driveline components in designated locations; unsealed components removed and inspected by CSR or Enterprises rather than engine shipped for testing. · EP Lotus/Caterham 7 America fuel injection permitted; IT preparation engine limitation removed. · Daimler SP 250 classified in EP with 2165 lbs minimum weight, 2548 cc eight-cylinder OHV engine, SU or Stromberg carburetors. · EP, FP, HP clarify percentage weight penalties sum before applying to base weight, round to nearest pound. · SRF3 alternator pulley specified as P/N G902130 or G902130A, minimum 12oz. · 84-87 Mazda 626 reclassified from FP to HP with 2300–2415 lb weight, 1998cc SOHC engine, two 32mm carburetors. · FP Fiat X1/9 and Bertone 1300 brake rotors now 257 x 12 mm, 10.1 inch diameter, 0.407 inch thickness. · EP Mazda MX-5 model year range corrected from 06-14 to 06-15. · P2 tonneau covers now allowed to meet minimum dimensions; cockpit equipment attachment wording clarified. · P2 removes effective date 01/01/2021 from six car spec lines in Table 1. · P2 engine specs B.1, B.2, B.3 limited to maximum 4 valves per cylinder. · Mazda 3 S 04-08 classified in EP at 2350 lbs minimum, 2.26L DOHC four-cylinder, fuel injected with 55mm throttle body, comp ratio 12.0:1 max, valve lift 0.500" max.showhide
  • EP EP Adjustments #31858inductionslower · inductionEP BMW Z3 2.5L intake restrictor reduced from 59mm to 58mm flat plate.
  • EP 1999 3.8L Ford Mustang to EP? #31635weightfaster · weightFord Mustang 94-98 weight reduced to 2550/2614/2678 lbs; 99-03 3.8L classified EP at 2700/2768/2835 lbs.
  • EP Improved Touring Tires #32064tyres & wheelsadded · tyres & wheelsEP, FP, HP Improved Touring cars may use any DOT-approved tyre as defined by 9.3.45.
  • FV Connecting Rod Update Request for 9.1.1.C Formula Vee (FV) 5.C.6 #32160engineadded · engineFV connecting rod options expanded to include BrianCrower part BC6417 and Newland Group part 4M113077.
  • FV E&O clarification of connecting rod center-to-center length #32183wordingwordingFV connecting rods minimum weight 425.0 grams, center-to-center length 130 +0.10/-0.25 mm; Crower, BrianCrower, Newland Group parts allowed if meeting specs.
  • P2 Add spec line for Beasley B2 #32147cars addedaddedP2 adds Beasley B2 at 1350 lbs with Mazda 12A, 40.5mm venturi, and up to 16.5in wing chord.
  • P2 E&O Table 1 spec line wing terminology #32148wordingwordingP2 wings: terminology change from 'cord' to 'chord', and 'only' removed from Bobsy and Jondal notes.
  • P2 E&O class name #32196wordingwordingP2 Converted F5 cars renamed F500, must retain F500 suspension, minimum width 55 inches.
  • EP Throttle Body and Idle Air #31800wordingwordingEP, FP, HP: stock/original idle control devices permitted unmodified or completely removed with openings blocked.
  • EP Porsche 968 Engine Questions #31831engineadded · engineEP Porsche 968 (92-95) now allowed to run dry sump.
  • EP Request weight reduction for 1979-1985 Mazda RX-7 #31833weightfaster · weightEP 1979-1985 Mazda RX-7 12A and 13B minimum weights cut 50–53 lbs across all spec lines.
  • P2 E&O Engine section #31969weightslower · weightP2 motorcycle engines gain 5cc to 1505cc max, two-stroke gains 5cc to 1205cc max, automotive engines add 50 lbs minimum weight to 1350 lbs.
  • EP Porsche 968 Engine Questions #31478engineengineEP Porsche 968 intake valve size changes to 39.0 mm, 1.54 mm seat width.
  • EP PCS E. 2. n. 4. Add Axle Shaft to Allow FWD the Same Freedom #31592otheraddedEP, FP, HP front-wheel-drive cars may alter body and subframes to install alternate axle shaft, matching RWD freedom.
  • EP BMW Z3 2.5L Spec Line #31724engineadded · engineEP BMW Z3 2.5L adds alternate throttle body option with Turner adapter and permits head casting 1738400.
  • FV Update direct replacement connecting rod information #31843wordingwordingFV Crower connecting rods SP93280B and BC6417 allowed as direct replacement, must meet OEM minimum weight.
  • P2 E&O letter #31539 – Control Area definition #31783wordingwordingP2 Control Area definition clarified: rectangular zone from rear edge of front tires to front edge of rear tires, full car width.
  • EP 944S2 Restrictor #31396inductionslower · inductionEP Porsche 944S2 89-91 requires 56mm flat plate intake restrictor; compression ratio 12.0:1 max, valve lift 0.500" max, dry sump allowed.
  • EP Classing Clarification for 1986 Toyota Corolla FX16 #31527cars addedaddedToyota Corolla GTS RWD (84-87) and FX16 FWD (87-88) added to HP; old Corolla (84-87) removed.
  • FV Formula V Connecting Rod Replacement #31448engineadded · engineFV allows Crower SP93280B and Brian Crower Racing Rods connecting rods as direct replacements, matching OEM minimum weight.
  • P2 BoP adjustment effective 1-1-22 #31538otherunclearP2 specification line B.1 engine table entry amended; details of change not provided in excerpt.
  • P2 E&O clarification of "Control Area" definition #31539wordingwordingP2 Control Area definition clarified: rear tire edge and front tire edge bounds, car's lower surface width, floor extensions and aerodynamic attachments included, vertical structures prohibited.
  • SRF Three Updates to SRF Rules #31523otherotherSRF wet tyres front P185/65R13 W2 option added; air box clarified as-delivered; SRF3 restrictor plate G301048 mandatory Jan 1 2022; P2 motorcycle engines up to 1005cc with 35mm restrictor, 2009+ stock 1075 lbs, 2008 stock 1025 lbs, modifie…
  • EP E&O; MR2 Track #31120suspension & brakessuspension & brakesToyota MR-2 1.6L 85-89 HP track width corrected to 15×47 / 15×47 inches; stock track baseline now 103% plus 2.5 inches.
  • P2 P2 CN Engine Rebuild Clarification #31000wordingwordingP2 CN Honda K20A-FD2 engine rebuild clarified: balancing, porting, polishing prohibited; valve jobs and honing must follow factory procedures.
  • EP Request to Allow F22c Engine for 2000-2003 Honda S2000 #30548cars addedaddedEP Honda S2000 now allows F22c engine in 1997cc and 2157cc displacements with revised weight brackets and specifications.
  • EP Request a review of the S14 240SX in EP. #30873weight -200 lbsfaster · weightEP Nissan 240-SX S13/S14 weight drops to 2400 lbs base, 2460 turbo, 2520 supercharged; comp ratio raised to 12.0:1, valve lift to 0.500 inch.
  • P2 F5 P2 Conversion #30856wordingwordingP2 Converted F5 cars must retain F5 suspension and meet P2 non-spec requirements except minimum width is 55 inches.
  • P2 Clarify minimum body width requirement #30859wordingwordingP2 minimum body width clarified: cannot extend inward beyond vertical plane through tire centerlines.
  • SRF SRF Wet Tires #30849tyres & wheelsadded · tyres & wheelsSRF wet tyres add Hoosier W2 option alongside existing H20 from October 4, 2021.
  • SRF SADEV-SRF3 Transmission #30926cars addedaddedSRF adds SADEV-SRF3 6-speed sequential transmission option with ratios 3.0–0.92:1 and 3.20 final drive.
  • SRF SRF Update Maintenance, Repairs and Seals #30961wordingwordingSRF seal requirements clarified: seals now must be on driveline components in designated locations; unsealed components removed and inspected by CSR or Enterprises rather than engine shipped for testing.
  • EP Lotus/Caterham 7 America Request #30392wordingwordingEP Lotus/Caterham 7 America fuel injection permitted; IT preparation engine limitation removed.
  • EP Reclassify Daimler SP 250 #30721cars addedaddedDaimler SP 250 classified in EP with 2165 lbs minimum weight, 2548 cc eight-cylinder OHV engine, SU or Stromberg carburetors.
  • EP Clarify Application of Percentage Based Weight Penalties #30669wordingwordingEP, FP, HP clarify percentage weight penalties sum before applying to base weight, round to nearest pound.
  • SRF SRF3 Alternator Pulley #30684engineadded · engineSRF3 alternator pulley specified as P/N G902130 or G902130A, minimum 12oz.
  • EP Change Classification of 84-87 Mazda 626 from FP to HP #30350cars addedadded84-87 Mazda 626 reclassified from FP to HP with 2300–2415 lb weight, 1998cc SOHC engine, two 32mm carburetors.
  • EP Fiat X1/9 brake rotors #30423otherotherFP Fiat X1/9 and Bertone 1300 brake rotors now 257 x 12 mm, 10.1 inch diameter, 0.407 inch thickness.
  • EP NC MX-5 year range correction E&O #30503cars addedaddedEP Mazda MX-5 model year range corrected from 06-14 to 06-15.
  • P2 E&O tonneau cover provision in cockpit opening section #30459wordingwordingP2 tonneau covers now allowed to meet minimum dimensions; cockpit equipment attachment wording clarified.
  • P2 Remove effective dates in Table 1 #30468wordingwordingP2 removes effective date 01/01/2021 from six car spec lines in Table 1.
  • P2 E&O Maximum Valves Per Cylinder #30560engineengineP2 engine specs B.1, B.2, B.3 limited to maximum 4 valves per cylinder.
  • EP Please Classify Mazda3 in FP #30165cars addedaddedMazda 3 S 04-08 classified in EP at 2350 lbs minimum, 2.26L DOHC four-cylinder, fuel injected with 55mm throttle body, comp ratio 12.0:1 max, valve lift 0.500" max.
Super Tour Mar 2021 ST21MAR192021-03-191:27.406Lucas Mann · fastest of 4 · top 4 within 5.9s1:26.120Lucian Pancea · fastest of 3 · top 3 within 3.8s136.9Lucian Pancea1:43.710Andrew Whitston · fastest of 7 · top 5 within 2.8s1:43.747Donnie Isley · fastest of 7 · top 5 within 1.7s108.0Zachary Whitston+17.627squal +16.304s120.5%qual 118.7%1:34.341Jesse Prather · fastest of 10 · top 5 within 5.7s1:34.810Jesse Prather · fastest of 10 · top 5 within 3.0s140.3Jesse Prather+8.690squal +6.935s110.1%qual 107.9%
66 earlier rule changes on record, in force before Super Tour Mar 2021 (from 2019)10 engine · 8 cars added · 8 weight · 7 tyres & wheels · 6 induction · 4 aero · 1 suspension & brakes · 18 wording · 4 other · P2 adds new spec line for 2-cycle 3-cylinder engine up to 820cc with 10 front, 14–15 rear wheel width. · SRF and SRF3 mandatory identification revised: removed Ford Performance and Blue Oval decals, added Hoosier logo placement. · EP Austin-Healey 3000 gains option to use TR-6 front calipers and discs as alternate. · FP Mk2 Golf and Jetta 1.8 lose 50 lbs to 1900; HP Jetta GLI engine code removed. · EP, FP, HP Level 1 and Level 2 induction systems: carburettor jets, needles, metering rods allowed; throttle body porting permitted; wording clarified. · EP Nissan Datsun SRL 311U Roadster minimum weight reduced 75 lbs to 1925. · EP Triumph TR8 78-81 minimum weight drops to 2500 lbs. · P2 motorcycle-engine cars: 2009+ stock 37mm restrictor, 2008- stock 35mm, modified 1075 lbs. Honda K20A 50mm restrictor. Various spec cars: restrictors increased or decreased 0.5–3mm. · SRF rear springs limited to P/N 280390 only, previous part numbers no longer allowed; ground clearance wording clarified. · HP 84-87 Toyota Corolla wheel diameter increases from 13 to 15 inches. · P2 rear wing rules clarified: standard wing 6×12 inches, end plates 14-inch square; alternate 1-meter formula wing 110cm wide, 9×18 inches, end plates 14×18 inches. · EP BMW Z3 2.5L cylinder head casting 1738400 permitted with iron block castings 1748933 or 1738566. · Porsche 911 S 67-68 classified in EP at 1800–1890 lbs, 1991cc opposed 6-cylinder SOHC with 36mm carburetors. · FV now permits 4 bolt wheels in addition to existing specifications. · FV now allows 4-bolt pattern wheels in addition to existing specifications. · EP BMW 2.8L, 328i E36/E46, and 325i E36 now require iron blocks only; 325i E46 aluminum block removed. · Elan NP01 added to P2 Table 1 as Spec Line car with 2000cc displacement and 42mm restrictor. · FP Pre: 1990–1994 Mazda Protégé classified at 2150–2258 lbs, 1839cc DOHC, fuel injection, 11.0:1 compression, .450" valve lift limit. · HP Mini Cooper 02-06 and 07-13 convertible model years corrected to 05-08 and 09-15 respectively. · P2 Enterprises Sports Racer now permits 55mm flat plate intake restrictor Part # WM303013 as alternative to SIR. · SRF Penske shock P/N 280396 bump stop P/N 280407 becomes mandatory, maximum one per shock, effective 05/01/2020. · EP Caterham 7 America engine limited to IT prep with specific sections, comp ratio 10.0:1, valve lift .380 inch. · P2 Enterprise Sports Racer 2.3L engine must use SIR or Flat Plate restrictor meeting peak horsepower, sized in whole or 0.5mm increments. · EP BMW 325is M-Technic 1994 minimum weight cut to 2550 lbs, modifier weights to 2614 and 2678. · HP Datsun 510 allows 40 DCOE carburetor option alongside existing 40 DCNF and 36mm DCNVH; auto side drafts moved to penalty structure. · EP fuel-injected BMW throttle body maximum inside diameter set to 64 mm. · FV rain tyre changes to Hoosier #44266 22.5 x 5.0 x 15 WET or W3. · P2 electronic throttle control wording clarified: ETC permitted if stock ECU throttle pedal activates original throttle shaft mechanism. · HP Datsun 1200 carburetor option changes from 26mm to 30mm choke(s) in 40 DCN, DCNF, IDF. · Mazda Miata models EP and FP throttle body specified 55mm, brake rotor thickness figures removed. · FV allows non-spec Hoosier tyres at Regional races only; Majors, Super Tour, and Runoffs require spec tyres from 1/1/2020. · Formula Vee now allows 22.5 x 5.5 x 15 rear tires on front axle; rain tire mandated as Hoosier #44266 22.5 x 5.0 x 15 from 1/1/2020. · P2 adds BMW to permitted motorcycle-based engines alongside Kawasaki, Suzuki, Yamaha, Honda. · SRF rain and brake rule supersedes GCR 9.3.32.B.2 effective 1/1/2024 through 12/31/2024. · EP, FP, HP cylinder head rules reorganized for clarity; no performance change. · FV wheels may now be 15-inch 4.5J steel VW with same 5-bolt pattern as standard 4J, within track limits. · SRF adds tire warmer prohibition and specifies Hoosier dry and wet tire part numbers. · SRF front nose weight minimum reduced from 35 to 32 lbs. · SRF2 becomes Regional Only; SRF3 nomenclature changed from GEN3 to Ford 1.6L conversion; SRF and SRF3 no longer compete together for points. · FV exhaust exit opening repositioned: minimum one inch, maximum four inches behind rear body. · P2 Honda K20A-FD2 non-composite chassis intake restrictor note clarified; restrictor implementation date removed. · FP and HP Austin-Healey Sprite Mk I / MG Midget may replace rear bodywork aft of cockpit with alternate material stock-appearing components. · EP Mazda MX-5 Global Cup classification updated to include 2019 model year. · Production classes: suspension rule clarified to specify spindles, hubs, bushings, bearings, and ball joints unrestricted. · Production carburetor and fuel injection rules clarified: permitted optional carburetors listed, Weber and auto-type substitutions specified, fuel injection throttle body and butterfly dimensions detailed, intake manifold port extension pr… · EP, FP, HP carburetors: jets, needles, metering rods, needle valves unrestricted; choke parts removable; stock or optional Weber 40 DCN permitted; Weber types, auto types listed. · FV allows fifteen-inch steel wheels at 4J or 4.5J width, standard VW sedan or within track dimensions. · P2 motorcycle engines: Stock restrictor to 35mm, Modified to 34mm; weights up to 1025 and 1125 lbs respectively. B.5 restrictor to 33mm, weight to 1185 lbs. · EP Mazda MX-5/Miata model years expand from 1999-2002 to 1999-2005. · P2 cars limited to power application on maximum two wheels. · SRF drivers may now use Dash Windscreen Kit P/N 1180103 or P/N 180102. · P2 Enterprise minimum weight increased to 1375 lbs.; peak horsepower of sealed ESR engine reduced per CRB specification. · FV exhaust outlet opening max distance from body rear increased from 3 to 4 inches. · EP Mazda RX-8 firewall may be modified for 13B engine fitment and must be sealed. · FV front track maximum 52.500 inches; rear track 49.125–50.750 inches; spacers now allowed. · EP, FP, HP: clarified that tapered holes in ball joints can be reamed for bolt conversion, and wheel bearings and hubs unrestricted on all axles. · EP open cars may now use aftermarket hardtops if OEM-appearance and non-carbon-fiber; specific model allowances removed as redundant. · FV disc brake assembly minimum weight clarified to 16.5 lbs total; caliper minimum weight requirement of 1.65 lbs removed. · EP Mazda RX-7 12A and 13B (79-85) lose up to 75 lbs; 13B (86-91) loses up to 79 lbs across three weight classes. · P2 stock and modified engines get smaller restrictors (35.0mm, 34.0mm, 33.0mm) and heavier minimums (1025, 1125, 1185 lbs). · P2 Line A.1 restrictor reduced from 40mm to 38mm. · FV intake manifold horizontal tube measurement location clarified; removed specific distance ranges from rule text. · P2 Spec Line cars now allow 1345cc Hayabusa stock engines at 1050 lb minimum with 30mm restrictor. · P2 Group CN Honda K20A-FD2 55mm intake restrictor implementation delayed from 1 January to 3 March 2019. · P2 Honda K20A-FD2 Group CN must use stock intake manifold, 64mm throttle, 55mm restrictor at 1500 lbs minimum.showhide
  • P2 Add a new spec line for a 2-cycle, 3-cylinder engine up to 820cc #30272cars addedaddedP2 adds new spec line for 2-cycle 3-cylinder engine up to 820cc with 10 front, 14–15 rear wheel width.
  • SRF Mandatory identification: #30223wordingwordingSRF and SRF3 mandatory identification revised: removed Ford Performance and Blue Oval decals, added Hoosier logo placement.
  • EP Alternate Front Brake Rotors and Calipers for EP AH 3000 #29893otherotherEP Austin-Healey 3000 gains option to use TR-6 front calipers and discs as alternate.
  • EP Mk2 VW Consistency and Cleanup of FP and HP Spec Lines #29195weight -50 lbsfaster · weightFP Mk2 Golf and Jetta 1.8 lose 50 lbs to 1900; HP Jetta GLI engine code removed.
  • EP Correct Wording for Level 1 and Level 2 Induction Systems #29406inductionfaster · inductionEP, FP, HP Level 1 and Level 2 induction systems: carburettor jets, needles, metering rods allowed; throttle body porting permitted; wording clarified.
  • EP Weight Reduction for Datsun Roadster #29409weight -75 lbsfaster · weightEP Nissan Datsun SRL 311U Roadster minimum weight reduced 75 lbs to 1925.
  • EP EP TR8 Adjustment #29512weight -100 lbsfaster · weightEP Triumph TR8 78-81 minimum weight drops to 2500 lbs.
  • P2 Balance of Performance adjustments effective 01-01-2021 #29822engineunclearP2 motorcycle-engine cars: 2009+ stock 37mm restrictor, 2008- stock 35mm, modified 1075 lbs. Honda K20A 50mm restrictor. Various spec cars: restrictors increased or decreased 0.5–3mm.
  • SRF SRF Shocks, Springs and Ride Height. #29688otherotherSRF rear springs limited to P/N 280390 only, previous part numbers no longer allowed; ground clearance wording clarified.
  • EP 84-87 Toyota Corolla HP Wheel Diameter Allowance Proposal E&O #29458otherfasterHP 84-87 Toyota Corolla wheel diameter increases from 13 to 15 inches.
  • P2 E&O clarification of P2 rear wing requirements #29205aeroaeroP2 rear wing rules clarified: standard wing 6×12 inches, end plates 14-inch square; alternate 1-meter formula wing 110cm wide, 9×18 inches, end plates 14×18 inches.
  • EP EP BMW Z3 Rule Clarification #28998wordingwordingEP BMW Z3 2.5L cylinder head casting 1738400 permitted with iron block castings 1748933 or 1738566.
  • EP Request to Classify Porsche 911 2.0L #28456cars addedaddedPorsche 911 S 67-68 classified in EP at 1800–1890 lbs, 1991cc opposed 6-cylinder SOHC with 36mm carburetors.
  • FV Support for Recommended Item - 4 bolt wheels in FV #29084cars addedaddedFV now permits 4 bolt wheels in addition to existing specifications.
  • FV Support for 4-bolt pattern wheels #28955 #29118tyres & wheelsadded · tyres & wheelsFV now allows 4-bolt pattern wheels in addition to existing specifications.
  • EP BMW Cylinder Head Casting and Part Numbers #28708engineslower · engineEP BMW 2.8L, 328i E36/E46, and 325i E36 now require iron blocks only; 325i E46 aluminum block removed.
  • P2 Classify Elan NP01 in P2 Table 1 #28812cars addedaddedElan NP01 added to P2 Table 1 as Spec Line car with 2000cc displacement and 42mm restrictor.
  • EP Request to Classify 1990-1994 Mazda Protege #28381cars addedaddedFP Pre: 1990–1994 Mazda Protégé classified at 2150–2258 lbs, 1839cc DOHC, fuel injection, 11.0:1 compression, .450" valve lift limit.
  • EP Error in Mini Cooper Spec Line #28713wordingwordingHP Mini Cooper 02-06 and 07-13 convertible model years corrected to 05-08 and 09-15 respectively.
  • P2 SCCA Enterprises ESR / P2 engine restrictor testing #28669otheraddedP2 Enterprises Sports Racer now permits 55mm flat plate intake restrictor Part # WM303013 as alternative to SIR.
  • SRF SRF Bump Stop Correction #27019wordingwordingSRF Penske shock P/N 280396 bump stop P/N 280407 becomes mandatory, maximum one per shock, effective 05/01/2020.
  • EP Caterham 7 Spec Line #28498wordingwordingEP Caterham 7 America engine limited to IT prep with specific sections, comp ratio 10.0:1, valve lift .380 inch.
  • P2 Add ESR inlet restrictor #27869inductionadded · inductionP2 Enterprise Sports Racer 2.3L engine must use SIR or Flat Plate restrictor meeting peak horsepower, sized in whole or 0.5mm increments.
  • EP Request to Review Horsepower Parity #27662induction
  • EP E36 (92-95) Brakes Errors and Omissions #28058weightfaster · weightEP BMW 325is M-Technic 1994 minimum weight cut to 2550 lbs, modifier weights to 2614 and 2678.
  • EP Request to allow 40 DCOE carb for the Datsun 510 #28195engineadded · engineHP Datsun 510 allows 40 DCOE carburetor option alongside existing 40 DCNF and 36mm DCNVH; auto side drafts moved to penalty structure.
  • EP Add Throttle Body Size these EP BMW Spec Lines #28422engineslower · engineEP fuel-injected BMW throttle body maximum inside diameter set to 64 mm.
  • FV Update rain tire designation #28444tyres & wheelstyres & wheelsFV rain tyre changes to Hoosier #44266 22.5 x 5.0 x 15 WET or W3.
  • P2 Request for Fly by Wire Rule Wording Change #28247wordingwordingP2 electronic throttle control wording clarified: ETC permitted if stock ECU throttle pedal activates original throttle shaft mechanism.
  • EP Request for Help for Datsun 1200 #27934inductionfaster · inductionHP Datsun 1200 carburetor option changes from 26mm to 30mm choke(s) in 40 DCN, DCNF, IDF.
  • EP Request to List Mazda Miata Throttle Body Size #27907wordingwordingMazda Miata models EP and FP throttle body specified 55mm, brake rotor thickness figures removed.
  • FV FV Allow non-spec tire in Regional competition #26284tyres & wheelsadded · tyres & wheelsFV allows non-spec Hoosier tyres at Regional races only; Majors, Super Tour, and Runoffs require spec tyres from 1/1/2020.
  • FV Request to Allow Rear Tires on the Front of Formula Vee #26537tyres & wheelsadded · tyres & wheelsFormula Vee now allows 22.5 x 5.5 x 15 rear tires on front axle; rain tire mandated as Hoosier #44266 22.5 x 5.0 x 15 from 1/1/2020.
  • P2 Request for addition of BMW Engine in P2 Engine Table #27821engineadded · engineP2 adds BMW to permitted motorcycle-based engines alongside Kawasaki, Suzuki, Yamaha, Honda.
  • SRF SRF Rain / Brake Rule - BoD approved as follows #34958wordingwordingSRF rain and brake rule supersedes GCR 9.3.32.B.2 effective 1/1/2024 through 12/31/2024.
  • EP Re-organize Prep2 Cylinder Head Rules for Clarity & Consistency #27661wordingwordingEP, FP, HP cylinder head rules reorganized for clarity; no performance change.
  • FV Clarification on Wheel Bolt Pattern #27603tyres & wheelsadded · tyres & wheelsFV wheels may now be 15-inch 4.5J steel VW with same 5-bolt pattern as standard 4J, within track limits.
  • SRF SRF Tire Warmer Rule #27622tyres & wheelstyres & wheelsSRF adds tire warmer prohibition and specifies Hoosier dry and wet tire part numbers.
  • SRF SRF / SRF3 Nose Weight Reduction #27706weightfaster · weightSRF front nose weight minimum reduced from 35 to 32 lbs.
  • SRF SRF / SRF3 Majors & Regional Class Updates #27723wordingwordingSRF2 becomes Regional Only; SRF3 nomenclature changed from GEN3 to Ford 1.6L conversion; SRF and SRF3 no longer compete together for points.
  • FV Allowed Modifications E&O #27398wordingwordingFV exhaust exit opening repositioned: minimum one inch, maximum four inches behind rear body.
  • P2 Update Engine Table Line E notes #27414wordingwordingP2 Honda K20A-FD2 non-composite chassis intake restrictor note clarified; restrictor implementation date removed.
  • EP Request bodywork for Austin Healey Bugeye Sprite MK1 #27106aeroadded · aeroFP and HP Austin-Healey Sprite Mk I / MG Midget may replace rear bodywork aft of cockpit with alternate material stock-appearing components.
  • EP Request to classify the GMX5 2019 #27263cars addedaddedEP Mazda MX-5 Global Cup classification updated to include 2019 model year.
  • EP level one susp. component rule #27270wordingwordingProduction classes: suspension rule clarified to specify spindles, hubs, bushings, bearings, and ball joints unrestricted.
  • EP Clarification of Carb Rules - Prep 1 #27300wordingwordingProduction carburetor and fuel injection rules clarified: permitted optional carburetors listed, Weber and auto-type substitutions specified, fuel injection throttle body and butterfly dimensions detailed, intake manifold port extension pr…
  • EP Clarification of Carb Rules - Prep 2 #27301inductioninductionEP, FP, HP carburetors: jets, needles, metering rods, needle valves unrestricted; choke parts removable; stock or optional Weber 40 DCN permitted; Weber types, auto types listed.
  • FV E&O Wheels #27230tyres & wheelsadded · tyres & wheelsFV allows fifteen-inch steel wheels at 4J or 4.5J width, standard VW sedan or within track dimensions.
  • P2 Update P2 Engine Table spec lines to reflect 3/1/2019 #27254engineslower · engineP2 motorcycle engines: Stock restrictor to 35mm, Modified to 34mm; weights up to 1025 and 1125 lbs respectively. B.5 restrictor to 33mm, weight to 1185 lbs.
  • EP Request Miata Eligibility - 2003 #27121cars addedaddedEP Mazda MX-5/Miata model years expand from 1999-2002 to 1999-2005.
  • P2 E&O Transmissions #27006engineslower · engineP2 cars limited to power application on maximum two wheels.
  • SRF SRF Dash Windscreen Kit #27028aeroadded · aeroSRF drivers may now use Dash Windscreen Kit P/N 1180103 or P/N 180102.
  • P2 Request to restrict all cars #26246weightslower · weightP2 Enterprise minimum weight increased to 1375 lbs.; peak horsepower of sealed ESR engine reduced per CRB specification.
  • FV Exhaust termination rule E&O #26702wordingwordingFV exhaust outlet opening max distance from body rear increased from 3 to 4 inches.
  • EP Allow Firewall Modification for Fitment of 13B into RX8 #26726engineadded · engineEP Mazda RX-8 firewall may be modified for 13B engine fitment and must be sealed.
  • FV E&O Dimensions #26674suspension & brakessuspension & brakesFV front track maximum 52.500 inches; rear track 49.125–50.750 inches; spacers now allowed.
  • EP Rollcenter Correction Clarification #25873wordingaddedEP, FP, HP: clarified that tapered holes in ball joints can be reamed for bolt conversion, and wheel bearings and hubs unrestricted on all axles.
  • EP Hardtops #26476aeroadded · aeroEP open cars may now use aftermarket hardtops if OEM-appearance and non-carbon-fiber; specific model allowances removed as redundant.
  • FV Request to clarify Disc Brake rules bearing retainer & weights #26262weightslower · weightFV disc brake assembly minimum weight clarified to 16.5 lbs total; caliper minimum weight requirement of 1.65 lbs removed.
  • EP Request for Competition Adjustment for 2nd Generation RX7 #25935weight -50 lbsfaster · weightEP Mazda RX-7 12A and 13B (79-85) lose up to 75 lbs; 13B (86-91) loses up to 79 lbs across three weight classes.
  • P2 Change Engine Table Lines B.1 & B.5 #25777inductionslower · inductionP2 stock and modified engines get smaller restrictors (35.0mm, 34.0mm, 33.0mm) and heavier minimums (1025, 1125, 1185 lbs).
  • P2 Change Line A.1 restrictor size #26429engineslower · engineP2 Line A.1 restrictor reduced from 40mm to 38mm.
  • FV FV Intake Manifold Clarification #26008wordingwordingFV intake manifold horizontal tube measurement location clarified; removed specific distance ranges from rule text.
  • P2 Request to Allow 1345cc Hayabusa Engines for Spec Line P2 Cars #25595cars addedaddedP2 Spec Line cars now allow 1345cc Hayabusa stock engines at 1050 lb minimum with 30mm restrictor.
  • P2 Change CN inlet restrictor implementation date #25816wordingwordingP2 Group CN Honda K20A-FD2 55mm intake restrictor implementation delayed from 1 January to 3 March 2019.
  • P2 Clarify Honda K20A-FD2 parts requirement #25950engineslower · engineP2 Honda K20A-FD2 Group CN must use stock intake manifold, 64mm throttle, 55mm restrictor at 1500 lbs minimum.
About this data
Best is the class's fastest lap in that event's qualifying or race sessions, with the driver who set it, how many cars set a time that session and how close the top five were; a best from fewer than three cars is greyed. With two or more classes, "vs" is the gap of each class's best to the first class's at the same event. "% of P2" is the class's best as a share of P2's best at the same event (100% is level, less is quicker): weather and track condition move every class together, so this compares across years where the raw times do not. It still breaks when P2's own field changes or one session was wet and another dry. Newest event first. The coloured figure under each value is the change from the previous event that has one (green is quicker, red slower). Whole laps only, so events with different sector layouts still compare. Weather and track condition are not accounted for.