P2 + SRF + FV + FP at Michelin Raceway Road Atlanta
SRF has no laps in the events chosen. It ran at U.S. 2016: add that event.
Official results win over the timing feed: the live timing recorded a 1:46.319 for Donnie Isley in Super Tour Mar 2023 Grp 3 F6,FF,FV Race 1, but the official results credit 1:55.894 as the car's fastest, so the timing system did not count that lap (usually a lap under a full-course yellow or a timing-loop fault); it is left out here too; the live timing recorded a 1:46.487 for Trevor Carmody in Super Tour Mar 2023 Grp 3 F6,FF,FV Race 1, but the official results credit 1:58.264 as the car's fastest, so the timing system did not count that lap (usually a lap under a full-course yellow or a timing-loop fault); it is left out here too; the live timing recorded a 1:46.209 for Stevan Davis in Super Tour Mar 2023 Grp 3 F6,FF,FV Race 1, but the official results credit 1:58.205 as the car's fastest, so the timing system did not count that lap (usually a lap under a full-course yellow or a timing-loop fault); it is left out here too; the live timing recorded a 1:48.336 for Russell Fredericks in Super Tour Mar 2023 Grp 3 F6,FF,FV Race 1, but the official results credit 2:01.684 as the car's fastest, so the timing system did not count that lap (usually a lap under a full-course yellow or a timing-loop fault); it is left out here too; the live timing recorded a 1:47.543 for Jonathan Weisheit in Super Tour Mar 2023 Grp 3 F6,FF,FV Race 1, but the official results credit 1:56.825 as the car's fastest, so the timing system did not count that lap (usually a lap under a full-course yellow or a timing-loop fault); it is left out here too; the live timing recorded a 1:38.568 for Mason Workman in Super Tour Mar 2023 Grp 6 EP,FP,Hp,GTL Race 1, but the official results credit 1:41.850 as the car's fastest, so the timing system did not count that lap (usually a lap under a full-course yellow or a timing-loop fault); it is left out here too; the live timing recorded a 1:39.671 for Perry Simonds in Super Tour Mar 2023 Grp 6 EP,FP,Hp,GTL Race 1, but the official results credit 1:42.681 as the car's fastest, so the timing system did not count that lap (usually a lap under a full-course yellow or a timing-loop fault); it is left out here too; the live timing recorded a 1:44.473 for Mark Weber in Super Tour Mar 2023 Grp 6 EP,FP,Hp,GTL Race 1, but the official results credit 1:58.872 as the car's fastest, so the timing system did not count that lap (usually a lap under a full-course yellow or a timing-loop fault); it is left out here too; the live timing recorded a 1:52.000 for Gregg Seigart in Super Tour Mar 2023 Grp 6 EP,FP,Hp,GTL Race 1, but the official results credit 1:59.629 as the car's fastest, so the timing system did not count that lap (usually a lap under a full-course yellow or a timing-loop fault); it is left out here too; the live timing recorded a 1:23.804 for Lucian Pancea in Super Tour Mar 2023 Grp 7 FA,FC,FE2,FX,P1,P2 Race 1, but the official results credit 1:34.097 as the car's fastest, so the timing system did not count that lap (usually a lap under a full-course yellow or a timing-loop fault); it is left out here too; the live timing recorded a 1:26.574 for Thomas Kaufman in Super Tour Mar 2023 Grp 7 FA,FC,FE2,FX,P1,P2 Race 1, but the official results credit 1:41.746 as the car's fastest, so the timing system did not count that lap (usually a lap under a full-course yellow or a timing-loop fault); it is left out here too; the live timing recorded a 1:28.363 for Peter Shadowen in Super Tour Mar 2023 Grp 7 FA,FC,FE2,FX,P1,P2 Race 1, but the official results credit 1:41.630 as the car's fastest, so the timing system did not count that lap (usually a lap under a full-course yellow or a timing-loop fault); it is left out here too; the live timing recorded a 1:44.874 for Stevan Davis in Super Tour Mar 2024 Grp 8 F6,FF,FV Race 1, but the official results credit 1:46.193 as the car's fastest, so the timing system did not count that lap (usually a lap under a full-course yellow or a timing-loop fault); it is left out here too; the live timing recorded a 1:51.031 for William Duke Ragsdale in Super Tour Mar 2024 Grp 8 F6,FF,FV Race 1, but the official results credit 1:51.060 as the car's fastest, so the timing system did not count that lap (usually a lap under a full-course yellow or a timing-loop fault); it is left out here too; the live timing recorded a 1:39.332 for Stephen Simonds in Super Tour Mar 2025 Grp 6 EP FP HP B-Spec Race 1, but the official results credit 1:40.560 as the car's fastest, so the timing system did not count that lap (usually a lap under a full-course yellow or a timing-loop fault); it is left out here too; the live timing recorded a 1:41.676 for Mark Weber in Super Tour Mar 2025 Grp 6 EP FP HP B-Spec Race 1, but the official results credit 1:42.215 as the car's fastest, so the timing system did not count that lap (usually a lap under a full-course yellow or a timing-loop fault); it is left out here too; the live timing recorded a 1:39.600 for Ken Kannard in Super Tour Mar 2026 Grp 5 EP FP HP B-Spec Race 1, but the official results credit 1:48.771 as the car's fastest, so the timing system did not count that lap (usually a lap under a full-course yellow or a timing-loop fault); it is left out here too; the live timing recorded a 1:39.386 for Cliff Ira in Super Tour Mar 2026 Grp 5 EP FP HP B-Spec Race 1, but the official results credit 1:48.427 as the car's fastest, so the timing system did not count that lap (usually a lap under a full-course yellow or a timing-loop fault); it is left out here too; the live timing recorded a 1:41.177 for Steven Powers in Super Tour Mar 2026 Grp 5 EP FP HP B-Spec Race 1, but the official results credit 1:48.283 as the car's fastest, so the timing system did not count that lap (usually a lap under a full-course yellow or a timing-loop fault); it is left out here too; the live timing recorded a 1:42.165 for Robert Garrison in Super Tour Mar 2026 Grp 5 EP FP HP B-Spec Race 1, but the official results credit 1:47.908 as the car's fastest, so the timing system did not count that lap (usually a lap under a full-course yellow or a timing-loop fault); it is left out here too.
One lap is left out as timing errors (far too short to be a lap of this track). The rest of those sessions, sectors included, is used.
One row per driver and car (a driver who changed cars has a row for each). Each cell is that driver's best in that car across the selected events, with the session it was set in. The columns are about the car: its best lap, the lap its best sectors add up to, its sector times and trap speed. "Driver metrics" adds two about the driver: the best 5-lap stint (mean of the quickest five consecutive race laps) and consistency (how far the median race lap sat behind the best in that race; small is a driver who does it every lap), both from the race with the best stint. The fastest in each column is purple, and a car whose best lap is more than 115% of the fastest in its class is greyed (marked ">115%" beside the driver) and left out of the colour scale. Click a column to sort, a row to highlight it.
Theoretical lap is the sum of the best sectors, whichever laps they came from, and never slower than the best lap (where a car's fastest laps were recorded without sector times, its best lap is used). The 115% mark is about the car's best lap only: a car whose best lap is within 115% of the fastest in its class is never marked. Greyed sectors with no theoretical lap mean the sector times on file do not add up to a believable lap. Letters refer to the events above; Q is qualifying, R a race.
By car
Car
Class
Drivers
Lap
Qual
Race
Trap
S1
S2
S3
Stohr
P2
1
1:22.533Lucian Pancea
1:22.533Lucian Pancea
1:34.097Lucian Pancea
143.9Lucian Pancea
31.424Lucian Pancea
29.678Lucian Pancea
21.431Lucian Pancea
Stohr 2013 Stohr P2
P2
1
1:24.228Lucian Pancea
1:24.228Lucian Pancea
1:44.111Lucian Pancea
134.0Lucian Pancea
32.262Lucian Pancea
30.249Lucian Pancea
21.717Lucian Pancea
Stohr WF1
P2
2
1:24.366Sherman Chao
1:24.366Sherman Chao
1:26.052Sherman Chao
138.2Sherman Chao
31.723Sherman Chao
30.127Sherman Chao
22.076Sherman Chao
Stohr WF1 (2018)
P2
1
1:24.366Sherman Chao
1:24.366Sherman Chao
1:26.052Sherman Chao
138.2Sherman Chao
31.723Sherman Chao
30.127Sherman Chao
22.076Sherman Chao
Stohr WF1 (2003)
P2
1
1:28.086Michael Moulton
1:28.086Michael Moulton
1:29.061Michael Moulton
132.9Michael Moulton
34.071Michael Moulton
30.851Michael Moulton
22.937Michael Moulton
Stohr WFX-101
P2
1
1:25.444Thomas Kaufman
1:25.444Thomas Kaufman
1:41.746Thomas Kaufman
138.8Thomas Kaufman
32.418Thomas Kaufman
30.806Thomas Kaufman
22.186Thomas Kaufman
West WX10
P2
1
1:26.716Peter Shadowen
1:26.716Peter Shadowen
1:41.630Peter Shadowen
137.3Peter Shadowen
32.952Peter Shadowen
30.870Peter Shadowen
22.399Peter Shadowen
Van Diemen Prince - LSR
P2
1
1:29.395Brian Lindstrand
1:29.395Brian Lindstrand
1:30.739Brian Lindstrand
131.0Brian Lindstrand
34.337Brian Lindstrand
32.039Brian Lindstrand
22.904Brian Lindstrand
Acura Integra
FP
2
1:37.623Ken Kannard
1:37.924Ken Kannard
1:37.623Ken Kannard
122.9Ken Kannard
37.585Ken Kannard
0.792Ken Kannard
24.740Ken Kannard
Mazda Miata
FP
8
1:38.226Mason Workman
1:38.226Mason Workman
1:38.805Mason Workman
122.4Mark Weber
37.238Mason Workman
0.778Stephen Simonds
25.160Mason Workman
Mazda Miata (1992)
FP
2
1:38.226Mason Workman
1:38.226Mason Workman
1:38.805Mason Workman
120.2Mason Workman
37.238Mason Workman
35.576Mason Workman
25.160Mason Workman
Mazda MIata
FP
1
1:40.329Steven Powers
1:40.329Steven Powers
1:48.283Steven Powers
118.4Steven Powers
38.142Steven Powers
36.400Steven Powers
25.684Steven Powers
Mazda Miata (1990)
FP
1
1:40.560Stephen Simonds
1:40.686Stephen Simonds
1:40.560Stephen Simonds
113.4Stephen Simonds
38.314Stephen Simonds
0.778Stephen Simonds
25.592Stephen Simonds
Mazda Miata
FP
3
1:41.644Robert Garrison
1:41.644Robert Garrison
1:42.681Perry Simonds
120.2Perry Simonds
38.892Robert Garrison
36.374Perry Simonds
25.814Perry Simonds
Mazda Miata - FP (1993)
FP
1
1:41.786Mark Weber
1:41.786Mark Weber
1:42.215Mark Weber
122.4Mark Weber
39.042Mark Weber
36.275Mark Weber
26.155Mark Weber
Honda CRX
FP
1
1:38.576Chris Bovis
1:38.576Chris Bovis
1:38.655Chris Bovis
117.3Chris Bovis
37.788Chris Bovis
35.332Chris Bovis
24.941Chris Bovis
BMW 325es
FP
1
1:38.885Matt Reppert
1:38.885Matt Reppert
1:38.946Matt Reppert
122.1Matt Reppert
37.730Matt Reppert
35.717Matt Reppert
25.209Matt Reppert
Honda Civic Del Sol VTEC
FP
1
1:39.502Cliff Ira
1:39.502Cliff Ira
1:48.427Cliff Ira
123.3Cliff Ira
38.104Cliff Ira
35.234Cliff Ira
25.476Cliff Ira
Protoform P2
FV
4
1:43.556Andrew Whitston
1:44.524Andrew Whitston
1:43.556Andrew Whitston
105.7Mike Lawrence
38.495Andrew Whitston
37.547Mike Lawrence
26.789Andrew Whitston
Protoform P2 (1997)
FV
1
1:43.556Andrew Whitston
1:44.524Andrew Whitston
1:43.556Andrew Whitston
102.2Andrew Whitston
38.495Andrew Whitston
37.974Andrew Whitston
26.789Andrew Whitston
Protoform P2
FV
2
1:44.011Mike Lawrence
1:44.684Mike Lawrence
1:44.011Mike Lawrence
105.7Mike Lawrence
38.779Mike Lawrence
37.547Mike Lawrence
27.122Mike Lawrence
Protoform P2 (1996)
FV
1
1:48.017Ron Whitston
1:48.590Ron Whitston
1:48.017Ron Whitston
100.0Ron Whitston
40.887Ron Whitston
39.284Ron Whitston
27.418Ron Whitston
Vorscha GB4
FV
1
1:43.727Mitchell Ferguson
1:45.537Mitchell Ferguson
1:43.727Mitchell Ferguson
107.9Mitchell Ferguson
38.733Mitchell Ferguson
37.804Mitchell Ferguson
26.916Mitchell Ferguson
Volkswagen Protoform P2
FV
2
1:44.543Steve Whitston
1:47.631Steve Whitston
1:44.543Steve Whitston
101.8Trevor Carmody
38.681Steve Whitston
37.994Steve Whitston
26.999Steve Whitston
Volkswagen Protoform P2 (1997)
FV
1
1:44.543Steve Whitston
1:47.631Steve Whitston
1:44.543Steve Whitston
100.8Steve Whitston
38.681Steve Whitston
37.994Steve Whitston
26.999Steve Whitston
Volkswagen Protoform
FV
1
1:48.091Trevor Carmody
1:48.091Trevor Carmody
1:58.263Trevor Carmody
101.8Trevor Carmody
40.188Trevor Carmody
39.317Trevor Carmody
27.923Trevor Carmody
Agitator 016
FV
1
1:45.061Donnie Isley
1:45.061Donnie Isley
1:45.145Donnie Isley
107.1Donnie Isley
39.108Donnie Isley
38.266Donnie Isley
27.342Donnie Isley
Vortech 0
FV
3
1:45.108Stevan Davis
1:45.108Stevan Davis
1:46.193Stevan Davis
105.3Anthony Henderson
39.467Stevan Davis
38.215Stevan Davis
27.384Stevan Davis
Vortech (2011)
FV
1
1:45.108Stevan Davis
1:45.108Stevan Davis
1:46.193Stevan Davis
105.3Stevan Davis
39.467Stevan Davis
38.215Stevan Davis
27.384Stevan Davis
Vortech 0
FV
2
1:46.846Anthony Henderson
1:46.846Anthony Henderson
1:48.094Anthony Henderson
105.3Anthony Henderson
40.017Anthony Henderson
39.235Anthony Henderson
27.490Anthony Henderson
Vorscha GB3
FV
1
1:47.324Smith Jackson Ragsdale
1:57.449Smith Jackson Ragsdale
1:47.324Smith Jackson Ragsdale
98.4Smith Jackson Ragsdale
39.639Smith Jackson Ragsdale
39.124Smith Jackson Ragsdale
28.001Smith Jackson Ragsdale
Mysterian M2
FV
2
1:47.478Michael Nitz
1:47.545Michael Nitz
1:47.478Michael Nitz
103.8Jacob Schilling
40.302Michael Nitz
38.742Michael Nitz
27.669Michael Nitz
Mysterian M2 (1992)
FV
1
1:47.478Michael Nitz
1:47.545Michael Nitz
1:47.478Michael Nitz
99.5Michael Nitz
40.302Michael Nitz
38.742Michael Nitz
27.669Michael Nitz
Mysterian M2
FV
1
1:50.348Jacob Schilling
1:51.018Jacob Schilling
1:50.348Jacob Schilling
103.8Jacob Schilling
41.717Jacob Schilling
39.978Jacob Schilling
28.070Jacob Schilling
Protoform P3
FV
1
1:48.141Rich Richardson
1:52.689Rich Richardson
1:48.141Rich Richardson
98.5Rich Richardson
41.004Rich Richardson
38.798Rich Richardson
27.780Rich Richardson
Mysterian M3
FV
1
1:49.107Mark Richardson
1:50.256Mark Richardson
1:49.107Mark Richardson
100.3Mark Richardson
41.213Mark Richardson
39.424Mark Richardson
28.021Mark Richardson
Caracal D
FV
1
1:49.406Russell Fredericks
1:49.406Russell Fredericks
2:01.684Russell Fredericks
104.1Russell Fredericks
41.122Russell Fredericks
40.095Russell Fredericks
27.801Russell Fredericks
Lazer 1
FV
1
1:49.498Rich Richardson
1:50.080Rich Richardson
1:49.498Rich Richardson
102.5Rich Richardson
41.168Rich Richardson
39.823Rich Richardson
28.069Rich Richardson
Volkswagen Crusader
FV
1
1:51.060William Duke Ragsdale
2:01.913William Duke Ragsdale
1:51.060William Duke Ragsdale
96.6William Duke Ragsdale
40.655William Duke Ragsdale
39.992William Duke Ragsdale
28.658William Duke Ragsdale
Caracel C
FV
1
1:51.291John Mcaleer
1:52.321John Mcaleer
1:51.291John Mcaleer
104.6John Mcaleer
41.585John Mcaleer
40.766John Mcaleer
27.961John Mcaleer
JK Technologies XP-1
FV
1
1:52.465Jonathan Weisheit
1:52.465Jonathan Weisheit
1:56.826Jonathan Weisheit
102.5Jonathan Weisheit
41.732Jonathan Weisheit
41.272Jonathan Weisheit
28.068Jonathan Weisheit
Citation CW1
FV
1
1:52.837Barry Shelton
1:53.780Barry Shelton
1:52.837Barry Shelton
100.4Barry Shelton
42.282Barry Shelton
41.029Barry Shelton
28.851Barry Shelton
Fiat 124 Spider
FP
1
2:08.730Douglas Sanders
2:08.730Douglas Sanders
91.2Douglas Sanders
50.604Douglas Sanders
42.988Douglas Sanders
34.387Douglas Sanders
About this data
The best any driver of each car managed across the selected events, with who set it. Spellings and model years of the same car are grouped; click a row marked ▸ to see each version. Grouping is worked out from the names, so tell us if two cars are wrongly merged or split.
Rule changes between these events
Super Tour Mar 2023 → Super Tour Mar 2024 2023-03-10 to 2024-03-08
P2 Remove redundant effective date language and update engine table
faster · engineP2 motorcycle restrictor reduced 35mm to 34mm for 2011+ Kawasaki; minimum weights increased to 1100 lbs for 2009+ engines; cockpit length corrected to 23.622 inches.As printed in Fastrack
In P2, GCR section 9.1.8.C.D.2, change as follows: "Height: No part of the vehicle having special or significant aerodynamic function shall exceed a height of 115cm (45.275 inches) above the ground with the car in normal racing trim, driver aboard." In P2, GCR section 9.1.8.C.D.3, change as follows: "However, no portion shall extend more than 10cm (3.937 inches) beyond a plane tangent to the outer face of the front and rear wheels with tires." P2 Engine Table Spec Line Engine Series
A specification table follows in the original; it is not shown here.
wordingP2 minimum side body height must equal front axle centerline height, viewed from side.As printed in Fastrack
In P2, GCR section 9.1.8.C.D.6, change as follows: "As viewed from the side, T the outermost surface of side pods body between the front and rear wheel openings and above the floor must have a minimum height equal to the height of the front axle centerline."
P2 Clarify closed cockpit single seat car allowance
wordingP2 closed cockpit single seat cars now prohibited unless Table 1 spec line permits.As printed in Fastrack
In P2, GCR section 9.1.8.C.C, add a section as follows: "4. Closed cockpit single seat cars are not permitted unless specifically allowed by a spec line in Table 1."
tyres & wheelsSRF wet front tyre changes to Hoosier P/N 46100 P185/60R13 H20 or W2 with 2.5" ground clearance.As printed in Fastrack
In SRF, GCR section 9.1.8.D.1.X.f, change as follows: "Wet: Front – Hoosier P/N 46100 P185/60R13 H20 or W2 Rear – Hoosier P/N 46105 P205/60R13 H20 or W2 Ground clearance is 2.5" with driver as raced when P185/60R13 (H20 or W2) tires are used."
addedFord Fiesta HP model years change to 11-19; Chevrolet Sonic FP model years change to 12-19.As printed in Fastrack
In HP, adjust model years of the "Ford Fiesta (11-16)" spec line as follows: "Ford Fiesta (11-16 9)" In FP, adjust model years of the "Chevrolet Sonic (12-16)" spec line as follows: "Chevrolet Sonic (12-16 9)"
removed · cars addedHP Volkswagen Rabbit Cabriolet 1780 removed; Rabbit 1588 and 1715 reclassified with year and body-type clarifications.As printed in Fastrack
In HP Spec Lines, Volkswagen Rabbit Cabriolet 1780, delete in its entirely: In HP, Spec Lines, Volkswagen Rabbit, change Title as follows: “Volkswagen Rabbit 1588 (includes Cabriolet / convertible)” “Volkswagen Rabbit 1715 (81-84) (excl. conv.)” “Volkswagen Rabbit GTI 1780 (83-84)”
FP Correct Intake Valve Size on 1500cc Midget/Spitfire
wordingFP and HP Sprite and Spitfire 1500 intake valve size corrected to 36.6 mm, removing prior decimal specifications.As printed in Fastrack
In FP Spec Lines, Austin-Healey Sprite Mk. I, II,III, IV MG Midget Mk I,II, III, IV & 1500, change Intake Valve Size as follows: "(I) 36.65.3/(1.44)" In FP Spec Lines, Triumph Spitfire Mk. IV & 1500, change Intake Valve Size as follows: "(I) 36.65.5/(1.440)" In HP Spec Lines, Triumph Spitfire 1500, change Intake Valve Size as follows: "(I) 36.65.5/(1.440)" In HP Spec Lines, Triumph Spitfire Mk. III & IV 1500, change Intake Valve Size as follows: "(I) 36.65.5/(1.440)"
addedSRF radiator options expanded: Enterprises P/N 480465 with baffle 480464, 480466, or Automotive 1R698 and CU698 allowed if cross-reference equivalent.As printed in Fastrack
In SRF, GCR section 9.1.8.D.1.V.j, change as follows: "Radiator - Enterprises new style P/N 480465 (requires baffle P/N 480464) or P/N 480466 can be used. P/N 480466, may can be replaced with Automotive P/N 1R698, CU698 or equivalent OEM manufacturer justified by one cross-reference chart equivalent, as long as the size, shape, and material are the same as the original P/N. The capacity, core thickness, etc., cannot be changed even if allowed under the above. The competitor is responsible for providing this documentation of the cross-reference P/N."
slower · weightEP Porsche 944/924S combines 2.5L and 2.7L variants (83-89), raises weight to 2250–2415 lbs, allows 2681cc displacement.As printed in Fastrack
In EP Spec Lines, delete the Porsche 944/924S 2.5L (2V) (83-88) spec line entirely, and create a new spec line for Porsche 944/924S 2.5L(2V) 2.7L(2V) (83-89) as follows:
A specification table follows in the original; it is not shown here.
faster · weightFP Toyota Corolla 2TC loses 43 lbs to 1810; HP Corolla loses 50–52 lbs to 1910–2006.As printed in Fastrack
In FP Spec Lines, Toyota Corolla 2TC (71-74), change weight as follows: "1853 1810" In HP Spec Lines, Toyota Corolla (71-74), change weight as follows: “1960 1910 * 2009 1958 ** 2058 2006”
wordingP2 Table 1 engine date ranges clarified: Stock Engine replaced with specific marques Suzuki, Yamaha, Honda, BMW for 2009-newer and 2008-older rows.As printed in Fastrack
In P2 Table 1, change as follows: P2 Table 1 (Spec Line Cars)
A specification table follows in the original; it is not shown here.
otherSRF rain/brake light must be Super Bright LEDs Inc. P/N PT-STRB-R24; secondary filament must connect to rain light switch.As printed in Fastrack
In SRF, GCR section 9.1.8.D.1.W.l, change as follows: "A Super Bright LEDs Inc. rain / brake light comprised of a single standard trailer oval lamp, 2-1/4 inches x 6-1/2 inches, with incandescent or LED illumination, P/N PT-STRB-R24, is required in the original roll hoop mounting location. This rule supersedes GCR section 9.3.32.B.2 effective 1/1/2024 through 12/31/2024. No changes may be made to the original 3-pin connector on the wiring harness. The secondary filament of the brake light assembly shall must be connected to a switch enabling its use as a rain light."
otherSRF brake light must be Super Bright LEDs Inc. P/N PT-STRB-R24, with SCCA Enterprises P/N 180427A pigtail and strobing rain light kit.As printed in Fastrack
In SRF, GCR section 9.1.8.D.1.W.l, change as follows: "A Super Bright LEDs Inc. P/N PT-STRB-R24 (SCCA Enterprises P/N 180427A) rain / brake light, P/N PT-STRB-R24, is required in the original roll hoop mounting location. This rule supersedes GCR section 9.3.32.B.2 effective 1/1/2024 through 12/31/2024. No changes may be made to the original 3-pin connector on the wiring harness. An SCCA Enterprises P/N 1190503 Strobing Brake Light Pigtail is required. The secondary filament of the brake light assembly must be connected to a switch enabling its use as a strobing rain light. A Strobing Brake Light Kit P/N 1168003 is available, which includes the brake light and pigtail."
wordingP2 AMAC and related cars: clarified B.1 modified engine range to 2008 and older stock engines only, with 38mm restrictor and 1025 lbs minimum weight.As printed in Fastrack
In P2 Table 1, change as follows: P2 Table 1 (Spec Line Cars)
A specification table follows in the original; it is not shown here.
unclearFP Honda throttle body inside diameters corrected across seven models: Civic 1.5 to 42", Civic Si to 55", CRX 1.5 to 42", CRX 84-87 to 33/42", CRX Si 88-91 to 55".As printed in Fastrack
In FP Spec Lines, change Fuel Injected Equipped Throttle Body Inside Diameter as follows: Acura Integra GSR (92-93): "58" Honda Civic 1.5 (88-91): "NA 42" Honda Civic EX (90-91): "55" Honda Civic Si (88-91): “42 55” Honda CRX 1.5 (88-91): “33 (primary) 42 (secondary) 42” Honda CRX / CRX Si (84-87): ”42 33 (primary) 42 (secondary)” Honda CRX Si (88-91): ”NA 55”
slower · weightEP Triumph GT6 dual 1.75-inch carburetors weight rises to 1940 lbs; triple Weber 40 DCOE option added at 1990 lbs.As printed in Fastrack
In EP spec line, Triumph GT6, make the following change in the Notes section: "Two (2) 1.75” auto-type carburetors @ 1970 40 lbs. Three (3) Weber 40 DCOE on IR manifold with 28mm chokes @ 1990 lbs. Laycock overdrive, May use 5 speed gearbox w/o overdrive. Three (3) Weber 40mm DCOE w/28mm venturi on individual runner manifold @ 2020 lb."
In SRF, GCR section 9.1.8.D.1.H, add the following: "NO MODIFICATIONS ALLOWED. Front brake ducts are required, attached to the openings in the lower radiator baffles, any flexible 4" duct material allowed, installed length minimum 12" maximum 36" in length. Must be securely fastened, Bracket Part # P/N 800368 can be used. Shall Must serve no other purpose. An extension may be welded to the side of the throttle pedal to improve heel-and-toe braking. Master cylinder casting / location must be used as delivered on P/N 180110 Pedal Mounting support. Aeroquip style -3 braided stainless flex lines only, must attach to all brake components without modification. Brake pad "anti-rattle" clips must be removed." In SRF, GCR section 9.1.8.D.1.V, add the following: "ii. Rear SADEV shift cable aluminum two-piece style clamp may be used. The P/N WM302007A clamp must serve no other purpose." In SRF, GCR section 9.1.8.D.1.X.k, add the following: "Negative camber shall must not exceed 5.0 degrees absolute maximum front and rear." In SRF, GCR section 9.1.8.D.1.AA.b, add the following: "2. Height of the radiator opening vertical surface 3 1/2“ +/- 1/2"." P2 Engine Table B.1 2008 and older Stock Suzuki, Yamaha, Honda, BMW 38.5mm P2 Engine Table B.2 Not required P2 Engine Table B.3 38.5mm Modified Engine 950 lbs. 1005cc max P2 Engine Table B.1 2008 and older 37mm P2 Engine Table B.2 Not required P2 Engine Table B.3 39mm Stock Engine 1050 lbs.
faster · inductionEP Honda S2000 fuel injected throttle body inside diameter increases from 62mm to 64mm.As printed in Fastrack
In EP spec line, Honda S2000, make the following changes to its spec line: Fuel Injected Equipped Throttle Body Inside Diameter: "62 64" Notes: "Comp. Ratio limited to 12.0:1. Valve lift limited to .500”. An adaptor plate can be used to mount the 62mm throttle body from '00-05 to the '06-09 intake manifold. The adaptor plate can be no more than 1.25" thick, and its bore must not exceed the "Fuel Injected Equipped Throttle Body Inside Diameter" maximum spec of 64mm."
wordingEP Triumph TR8 dry sump allowance moved from Carburetor line to Notes.As printed in Fastrack
In EP spec line, Triumph TR8 (78-81), move the "Dry sump allowed" wording to the appropriate location as follows: Carburetor. No. & Type: “Zenith Stromberg carbs or fuel injection. Dry sump is allowed.” Notes: “Comp. Ratio limited to 12.0:1, Valve lift limited to .500”. Dry sump is allowed.”
added · engineP2 Suzuki GSX-R1000 engine: 2007–2008 crankcase 11300-21860 may be replaced with 2016–2019 GSX-S1000 part 11301-04840.As printed in Fastrack
In P2 Engine Table, Spec Line B.1, add to notes as follows: "No modifications allowed on engines manufactured after 2008 model year. 2007-2008 Suzuki GSX-R1000 crankcase part #11300-21860 may be replaced with 2016-2019 Suzuki GSX-S1000 crankcase part #11301-04840."
In HP Spec Lines, delete the following redundant spec lines in their entirety: Spec line #10 - VW Rabbit Cabriolet 1780 Spec line #3 - VW Scirocco 1588 Spec line #4 - VW Scirocco 1780 (8-valve) (83-88) Spec line #5 - VW Scirocco 1588
wordingP2 Spec Line E engine notes clarify oil system, ECU, and exhaust remain unrestricted; wording only.As printed in Fastrack
In P2 Engine Table, Spec Line E, change the notes as follows: "No engine modifications except for dry sump oil system, ECU mapping, and exhaust system the following: oil system, ECU, and exhaust are unrestricted."
addedFP Honda CRX 84-87 plastic front header nose panel, rocker skirts, door caps can now be replica alternate material stock appearance.As printed in Fastrack
In FP spec line "Honda CRX / CRX Si (84-87)", add the following wording to the Notes section: "The plastic OE front header/nose body panel, lower rocker side-skirt, and lower door cap panel can be replaced by a replica, which may be constructed of an alternate material, provided its appearance remains stock."
added · inductionFP Acura Integra 90-01 and Honda Civic Del Sol VTEC, Civic Si 99-00 require 55mm flat plate intake restrictor.As printed in Fastrack
In the following FP spec lines, add the following wording to the Notes section: Acura Integra (90-93) Acura Integra LS (94-01) Acura Integra GSR (92-93) Honda Civic Del Sol VTEC (94-97) Honda Civic Si (99-00) "55mm Flat Plate Intake Restrictor is required."
wordingP2 FIA Group CN notes clarify V de V European Proto Endurance Challenge bodywork, rear diffuser, wing, wheels, assisted shifting allowed; regulations link provided.As printed in Fastrack
In P2 Table 1, FIA Group CN spec line, change the notes as follows: "FIA Group CN homologated chassis, brake calipers and discs, hub carriers, and suspension components are required. V de V European Proto Endurance Series Challenge permitted bodywork, rear diffuser, wing, wheels, and assisted shifting are allowed. Car M must comply with all other P2 requirements. Competitors must have copies of FIA Group CN Technical Regulations and V de V European Proto Endurance Series Challenge Sporting and Technical Regulations in their possession and present them upon request are available here: https://www.scca.com/pages/technical-forms-and-downloads."
removed · cars addedEP Mazda RX-8 (04-11) alternate spec line removed; single spec line retained.As printed in Fastrack
Spec Lines, make the following changes to the two Mazda RX-8 spec lines. Remove spec line entirely: Mazda RX-8 (04-11) Remove the wording "alternate": Mazda RX-8 (04-11)(alternate) Spec Mazda (SM/SMX) None.
tyres & wheelsSRF wet tyres: front P185/60R13 H20 or W2 and rear P205/60R13 H20 or W2 removed; front P185/65R13 W2 and rear P205/60R13 W2 now required. Hoosier decal placement specified.As printed in Fastrack
In SRF, GCR section 9.1.8.D.1.X.f, change as follows: "Wet: Front – Hoosier P/N 46100 P185/60R13 H20 or W2 Rear – Hoosier P/N 46105 P205/60R13 H20 or W2 Ground clearance is 2.5” with driver as raced when P185/60R13 (H20 or W2) tires are used. OR Front – Hoosier P/N 46101 P185/65R13 W2 Rear – Hoosier P/N 46105 P205/60R13 W2 1. It is forbidden to regroove tires. 2. The use of tire warmers or cooling methods other than natural air convection or conduction is prohibited. The penalty for violation will be the loss of qualifying times and/or the disqualification of race results. 3. Hoosier SRF/SRF3 Decal Placement: Four (4) "Hoosier" decals are required in the following locations: Two (2) 11" X 3" decals on the vertical plane of the front nose to the outside of the cooling opening on each side and two (2) 18" X 5" decals, one on each side of the engine cover or above the rear wheel openings on the vertical plane. Hoosier decals are available, free of charge, from all Hoosier tire distributors including SCCA Enterprises."
wordingFE and SRF protest fee rules redirected to GCR section 8.3.1.D for fees and procedure.As printed in Fastrack
In FE, GCR section 9.1.1.I.2.U.b.3, change as follows: "Protest Fee: Regional -$25.00, National -$50.00. See GCR section 8.3.1.D for fees and payment procedure." In SRF, GCR section 9.1.8.D.1.U.b.3, change as follows: "Protest Fee: Regional -$25.00, National -$50.00. See GCR section 8.3.1.D for fees and payment procedure. Item 1 will be done by the CSR or other shop that is equipped for this type of work and will be paid directly."
SRF Update to Letter 36619 with new Hoosier Contingency Decal Info
wordingSRF Hoosier contingency decal requirement reduced from four decals in specific locations to three decals with simplified placement.As printed in Fastrack
In SRF, GCR section 9.1.8.D.1.X.f.3, change as follows: "Four (4) "Hoosier" decals are required in the following locations: Two (2) 11" X 3" decals on the vertical plane of the front nose to the outside of the cooling opening on each side and two (2) 18" X 5" decals, one on each side of the engine cover or above the rear wheel openings on the vertical plane. Hoosier decals are available, free of charge, from all Hoosier tire distributors including SCCA Enterprises Per Hoosier's contingency program, three (3) decals are required to qualify for contingency awards. One (1) decal must be located on each side of the car and one (1) decal must be visible on the front."
suspension & brakesSRF Wilwood vented rotor minimum thickness increases to 13.25mm, 0.522 inches.As printed in Fastrack
In SRF, GCR section 9.1.8.D.1.X.g, change as follows: "Brakes: Hawk Blue 9012 pads P/N 801993 must be used. Wilwood vented rotor P/N 800065 shall must be used as delivered with no machining of any kind. Minimum thickness 12.20mm (0.481”) 13.25mm (0.522”)."
wordingSRF3 Hoosier decal placement changed from four logos on nose and tail to three logos on sides and center front.As printed in Fastrack
In SRF, GCR section 9.1.8.D.2.B, change as follows: "Mandatory identification: "SRF3" near the side car numbers. "Hoosier" logo (4) on both sides front lower outer corners of the nose and each side of the tail. Three (3) "Hoosier" logos, one (1) on each side of the car and one (1) on the center front of the car."
wordingFV ferrous rotor must not be cross-drilled; pad cleaning grooves limit unchanged at three per side.As printed in Fastrack
In FV, GCR section 9.1.1.C.4.D, change as follows: "Any ferrous alloy, unvented rotor may be used, but must have a maximum diameter of 11.75 in. and a minimum thickness of 0.20 in. The otherwise smooth rotor may not be cross-drilled and may have a maximum of three pad cleaning grooves per side."
faster · engineHP 1275 Spridget compression ratio raised to 12.0:1; 1098cc also raised to 12.0:1.As printed in Fastrack
In HP Spec Lines, Austin-Healey Sprite MkI, II, III, IV MG Midget (ALL) - Level 2 - 1275cc, change Notes as follows: "(Effective 11/1/2024) Compression ratio limited to 11 12.0:1" In HP Spec Lines, Austin-Healey Sprite MkI, II, III, IV MG Midget (ALL) - Level 2 - 1098cc, change Notes as follows: "(Effective 11/1/2024) Compression ratio limited to 11 12.0:1"
wordingFP Sprite and Midget 1275cc and 1500cc bore, stroke, displacement, and valve specifications corrected to factory dimensions.As printed in Fastrack
In FP SPEC LINES, Austin-Healey Sprite Mk. I, II,III, IV MG Midget Mk I,II, III, IV & 1500, change the following: 1275cc: Bore x Stroke: "68.1x78.4 (2.68x3.09) 70.6x81.3 (2.78x3.20)" Displacement: "(77.78) 1275" Valves IN & EX: "(I) 32.1/(1.26) (E) 28.4/(1.12) (I) 33.3/(1.31) (E) 29.5/(1.16)" 1500cc: Bore x Stroke: "1.1x84.3 73.7x87.4 (2.90x3.44)" Displacement: "1491 (90.95) 1493" Valves IN & EX: "(I) 36.6/(1.44) (E) 28.7 29.7/(1.17)"
FP Create ruleset that allows GTL cars to run in FP
addedF Production now permits GT-Lite cars meeting Appendix N specs to compete, governed by Appendix N not PCS 9.1.5.As printed in Fastrack
“(Effective January 1, 2026) (Effective January 1, 2025)." Any GT-Lite (GTL) car meeting all of the requirements of Appendix N GT-LITE CATEGORY SPECIFICATIONS for inclusion into F PRODUCTION" may compete in the F-Production class. For GTL cars competing in FP, the level of preparation and modifications will be determined by Appendix N and not by PCS 9.1.5.”
slower · inductionFP Acura Integra and Honda Civic models restricted from 55mm to 51mm intake; Del Sol VTEC weight raised to 2290, 2347, 2405 lbs.As printed in Fastrack
In FP SPEC LINES, change Notes as follows: Acura Integra (90-93): "(Effective 3/1/2025) 55mm 51mm Flat Plate Intake Restrictor is required." Acura Integra LS (94-01): "(Effective 3/1/2025) 55mm 51mm Flat Plate Intake Restrictor is required." Acura Integra GSR (92-93): "(Effective 3/1/2025) 55mm 51mm Flat Plate Intake Restrictor is required." Honda Civic Si (99-00): "(Effective 3/1/2025) 55mm 51mm Flat Plate Intake Restrictor is required. In FP SPEC LINES, change as follows: Honda Civic Del Sol VTEC (94-97): " Weight: "(Effective 3/1/2025) 2265 *2322 **2378 2290 *2347 **2405 Notes: "(Effective 3/1/2025) 55mm 51mm Flat Plate Intake Restrictor is required."
addedFP Volkswagen Jetta Mark IV 4dr FWD added to GTL-FP Cars classification with 98.2 in wheelbase.As printed in Fastrack
In FP Spec Lines, Appendix N, GTL-FP Cars - Volkswagen, classify Jetta Mark - IV as follows: GTL-FP Cars - VOLKSWAGEN Model Years Body Style Drive-line Wheelbase (in) Notes Jetta Mark - IV 4dr FWD 98.2
added · inductionFP adds optional induction chokes as alternative to SIR, same size as listed restrictor.As printed in Fastrack
In FP Spec Lines, Appendix N: L.9, Fuel Injection System, add the following: "As an option, induction system “Chokes” may be used where a SIR is required. Said chokes shall be fitted to each barrel of carburetor/throttle body and all airflow into engine must pass through them. Choke size will be the same as listed SIR unless noted."
Super Tour Mar 2025 → Super Tour Mar 2026 2025-03-07 to 2026-03-06
faster · weightHP Ford Festiva 88-93 minimum weight lowered to 1600 lbs, competition weight to 1640, prepared weight to 1680; compression ratio raised to 11.0:1.As printed in Fastrack
In HP Spec Lines "Ford Festiva (88-93)" change as follows: Weight: "1700 1600 *1743 1640 **1785 1680" Notes: "Compression ratio limited to 10.5 11.0:1. Valve lift limited to .450”."
addedSRF drivers with disabilities may modify seat and controls for safety and comfort with SCCA approval, noted in logbook, for that driver only.As printed in Fastrack
In SRF, GCR section 9.1.8.D.1.D, add the following: "f. Driver Safety and Comfort modifications to seat and controls for drivers with disabilities may be made only by approval. These modifications must be reported to SCCA Enterprises and noted in the car logbook. The modifications are approved only for the noted driver with disabilities. If the car is used by or sold to another driver, it must be returned to the previous standard configuration."
faster · weightEP Fiat 124 Spider Competition 1600 and 2000 minimum weight drops 50 lbs to 2000; carburetors now allow 36mm chokes instead of 34mm.As printed in Fastrack
In EP Spec Lines, Fiat 124 Sport Spider 1600 & 124 Spider 2000, change as follows: Weight: "2050 2000" Carburetor No. & Type: "(2) Weber 40 IDF-40IFI, (2) Solex C40P116, 34 36mm choke(s) req’d, (2) Weber 45DCOE w/ 34 36 mm choke(s) on I.R. manifold or fuel injection."
added · engineSRF3 adds HD Oil Cooler P/N G1148500 option alongside standard P/N G480503, no fan permitted.As printed in Fastrack
In SRF, GCR section 9.1.8.D.1.V.ff, change as follows: "SRF3 Oil Cooler, P/N G480503 or HD Oil Cooler P/N G1148500 may be used as mounted per the GEN3 Assembly Manual. No fan permitted for SRF. HD Oil Cooler kit P/N G1148500 may be used as mounted per the GEN3 Conversion Manual."
addedEP, FP, HP throttle body inside dimensions and butterfly now allow +/-.25mm tolerance from stock.As printed in Fastrack
In GCR, Section 9.1.5.E., change as follows: 9.1.5.E.1.b.4: "The inside dimensions of the throttle body casting/housing (as measured at the throttle butterfly) must remain stock (tolerance of +/-.25mm), but the throttle body can otherwise be ported and polished." 9.1.5.E.2.b.4: "The inside dimensions of the throttle body casting/housing and all dimensions of the throttle butterfly must remain stock (tolerance of +/-.25mm)."
slower · engineHP Volvo 142 P-1800 engine gains compression ratio limit 12.0:1 and valve lift limit .425 inch.As printed in Fastrack
In HP Spec Lines, Volvo 142/142E P-1800 Engine, Effective 11/1/2025 add the following wording to Notes: "Comp. Ratio limited to 12.0:1. Valve lift limited to .425”."
slower · engineHP Mini DOHC 1.6 valve lift limit drops to .390" from .450".As printed in Fastrack
In HP Spec Lines, Mini Cooper (07-13) (includes 09-15 convertible and 12-15 Coupe), Effective 11/1/2025 make the following changes to the Notes: "Compression ratio limited to 11.0:1, Valve lift limited to .450”.390"."
wordingFP and HP Volkswagen Rabbit descriptions updated to clarify Cabriolet body style inclusion.As printed in Fastrack
In FP Spec Lines, make the following spec line correction: "Volkswagen Rabbit (Includes Convertible Cabriolet)" In HP Spec Lines, make the following spec line correction: "Volkswagen Rabbit 1588 (Includes Cabriolet)" "Volkswagen Rabbit 1715 (Includes Cabriolet)" "Volkswagen Rabbit 1780 (Includes Cabriolet)"
otherEP, FP, HP: rear drum-to-disc brake conversion clarified; rotors solid, diameter limited to largest front rotor permitted.As printed in Fastrack
In GCR, Section 9.1.5.E.7., change as follows: "e. Cars fitted with rear drum brakes, can convert to rear disc brakes without penalty. Note that the “Brakes Std.” and “Brakes Alt.” listings on a vehicle’s spec line do not prohibit a car that was fitted with rear drum brakes stock, from converting to rear disc brakes under this rule. When converting from rear drum brakes to rear disc brakes: 1. Rear brake rotors must be solid and can be no larger in diameter than the largest permitted front brake rotor, as defined on the vehicle’s spec line. 2. Rear calipers and mounting brackets are unrestricted but must be made of a ferrous or aluminum material. The standard and alternate brake listings on a vehicle’s specification line, does not prohibit a car that was fitted with rear drum brakes as stock from converting to rear disc brakes under this rule. 3. The “Brakes Std.” and “Brakes Alt.” listings on a vehicle’s spec line do not prohibit a car that was fitted with rear drum brakes as stock from converting to rear disc brakes under this rule."
removed · cars addedFP Volkswagen Scirocco: remove two weight tiers at 1733 and 1803 lbs, two engine options, and 13-inch wheel option; allow 15-inch wheels.As printed in Fastrack
In FP Spec Lines, Volkswagen Scirocco, change spec line as follows:
A specification table follows in the original; it is not shown here.
wordingEP Triumph TR2–TR4A may use 5-speed gearbox without overdrive; Weber carburetors and weight reference deleted.As printed in Fastrack
In EP Spec Lines, Triumph TR2, 3, 3A, 4, 4A, TR4, TR4A, IRS, make the following change to the Notes: "Front apron assembly may be made of alternate material. Three (3) Weber 40 DCOE on IR manifold with 28mm chokes @ 1990 lbs. Laycock overdrive, may use 5 speed gearbox without overdrive."
slower · weightFP Acura Integra and Honda Civic models gain 50–79 lbs minimum weight; Mazda Miata and Mercury Capri compression ratio to 11.0:1 and valve lift to .425".As printed in Fastrack
In FP, change Weight as follows: Acura Integra (90-93): "2235 2285 *2291 2342 **2347 2399" Acura Integra LS (94-01): "2260 2310 *2317 2368 **2373 2426" Acura Integra GSR (92-93): "2325 2375 *2383 2434 **2441 2494" Honda Civic Del Sol VTEC (94-97): "2290 2340 *2347 2399 **2378 2457" Honda Civic Si (99-00): "2250 2300 *2306 2358 **2363 2415" FP Spec Lines, change Notes as follows: Mazda Miata 1.6L (90-97): "Comp. Ratio limited to 10.0:1 11.0:1, Valve lift limited to .390” .425"." Mercury Capri 1.6L (91-94): "Comp. Ratio limited to 10.0:1 11.0:1, Valve lift limited to .390” .425"."
FP Adjust former-GTL Honda's with B/D-Series Engines
faster · engineFP Fiat X1/9 fuel injection carburetors simplified to one 36 or 40 DCNF option; exhaust valve enlarged to 33.0/1.30.As printed in Fastrack
In FP Spec Lines, change as follows: Fiat X-1/9 & Bertone 1300: "(1) Weber 32 DMTR or DATRA/100 w/32mm bores (1) 40 DCNF w/32mm choke(s) (2) auto-type side-draft w/28mm choke(s) on I.R. manifold Orientation of the alternate carburetor is unrestricted. The alternate carb adapter may not be thicker than 1.25”. The adapter may have a bore larger than the throttle bore of the approved alternate carburetor. Valve Size: (I) 35.5/(1.40) (E) 31.3/(1.23)30.5/(1.20) (E) 1.23 Trans. Speeds: 5" Fiat X-1/9 & Bertone: "Fuel Injection (1) 34 DMTR, (1) 36 DCNF w/34mm choke(s), or (1) 40DCNF w/34mm choke(s) (1) 36 or 40 DCNF w/34mm choke(s) (2) auto-type side-draft w/28mm choke(s) on I.R. manifold Orientation of the alternate carburetor is unrestricted. The alternate carb adapter may not be thicker than 1.25”. The adapter may have a bore larger than the throttle bore of the approved alternate carburetor. Valve Size: (I) 35.5/(1.40) (E) 33.0/(1.30) Trans. Speeds: 5 or 4"
FP Correct Valve Sizes on FP Fiat x19 1300 and 1500
engineSRF3 spark plugs limited to NGK LTR7IX-11 P/N G301041 only; washers and sealing rings prohibited.As printed in Fastrack
In SRF, GCR section 9.1.8.D.2.H.18, add the following: "Spark Plugs: P/N G301041 ONLY NGK LTR7IX-11 / Washers or sealing rings are not allowed for any purpose."
What the rules allowed changed as listed; this does not say what any particular car ran.
Sectors
S1 SF → IM1
S2 IM1 → IM2
S3 IM2 → SF
SPd IM2 → IM3 0.02 mi
Sectors are numbered in lap order from start/finish, whatever each event's timing called them; the loop names are SCCA timing's.