BoP Labbeta

BoP Lab / Classes / FF

FF vs FV vs SM vs P1 pace at every track

Lap times across years say as much about the weather as the class. % of FF is each class's best lap as a share of FF's on the same day, so the conditions drop out: 100% is level, less is quicker, and a move in it is the class getting faster or slower against the field.

Class · click a class to switch, + to compare alongside (up to 4: remove one to add another)
ASB-SpecEPFAFCFE2FF×FPvsFV×FXGT1GT2GTXHPPvsP1×P2vsSM×SMXSRF3STLSTUT1T2T3T4Show 50 inactive classes
Series
Reference · what % is measured against
Tracks · untick to narrow

Closest to the field: FF 100.0% of FF Rick Payne, Daytona International Speedway Runoffs 2015 race · FV 98.4% of FF Zachary Whitston, Virginia International Raceway Runoffs 2019 race · SM 97.1% of FF Elivan Goulart, Virginia International Raceway Runoffs 2019 race · P1 73.7% of FF Todd Slusher, Virginia International Raceway Runoffs 2019 race

1:201:402:002:202:4027 rule changes between Runoffs 2018 and Runoffs 201927 ▾16 rule changes between Runoffs 2019 and Runoffs 202016 ▾15 rule changes between Runoffs 2020 and Runoffs 202115 ▾8 rule changes between Runoffs 2021 and Runoffs 20228 ▾9 rule changes between Runoffs 2022 and Runoffs 20239 ▾14 rule changes between Runoffs 2023 and Runoffs 202414 ▾8 rule changes between Runoffs 2024 and Runoffs 20258 ▾4 rule changes between Runoffs 2025 and Runoffs 20264 ▾FF race best at Runoffs 2015: 2:03.383 (Rick Payne)FF race best at Runoffs 2016: 1:30.133 (Neil Verhagen)FF race best at Runoffs 2017: 1:44.524 (Jonathon Kotyk)FF race best at Runoffs 2018: 1:42.049 (Jonathon Kotyk)FF race best at Runoffs 2019: 2:20.474 (Jonathan Kotyk)FF race best at Runoffs 2020: 2:24.268 (Jeffrey Bartz)FF race best at Runoffs 2021: 1:55.676 (Jonathan Kotyk)FF race best at Runoffs 2022: 2:18.358 (Jonathan Kotyk)FF race best at Runoffs 2023: 2:00.583 (Jonathan Kotyk)FF race best at Runoffs 2024: 2:22.057 (Sebastian Mateo Naranjo)FF race best at Runoffs 2025: 2:25.541 (Calvin Kautz)FF race best at Runoffs 2026: 2:23.686 (Nathan Down)FF qualifying best at Runoffs 2015: 2:02.489 (Tim Kautz)FF qualifying best at Runoffs 2016: 1:29.213 (Neil Verhagen)FF qualifying best at Runoffs 2017: 1:44.601 (Zach Holden)FF qualifying best at Runoffs 2018: 1:41.612 (Jonathon Kotyk)FF qualifying best at Runoffs 2019: 1:59.563 (Tyler O'Connor)FF qualifying best at Runoffs 2020: 2:22.916 (Simon Sikes)FF qualifying best at Runoffs 2021: 1:44.359 (Jonathan Kotyk)FF qualifying best at Runoffs 2022: 1:59.215 (Jonathan Kotyk)FF qualifying best at Runoffs 2023: 1:59.249 (Nolan Allaer)FF qualifying best at Runoffs 2024: 2:22.552 (Calvin Kautz)FF qualifying best at Runoffs 2025: 2:24.905 (Jonathan Kotyk)FF qualifying best at Runoffs 2026: 2:23.047 (David Ybarra)FV race best at Runoffs 2015: 2:21.142 (Andrew Whitston)FV race best at Runoffs 2016: 1:38.066 (Flinn Lazier)FV race best at Runoffs 2017: 1:55.923 (Michael Varacins)FV race best at Runoffs 2018: 1:53.639 (Alex Scaler)FV race best at Runoffs 2019: 2:18.289 (Zachary Whitston)FV race best at Runoffs 2020: 2:45.816 (Alex Scaler)FV race best at Runoffs 2021: 1:57.234 (Alex Scaler)FV race best at Runoffs 2022: 2:18.093 (Andrew Whitston)FV race best at Runoffs 2023: 2:16.611 (Andrew Abbott)FV race best at Runoffs 2024: 2:44.834 (Andrew Abbott)FV race best at Runoffs 2025: 2:46.736 (Zachary Whitston)FV race best at Runoffs 2026: 2:45.272 (Brian Farnham)FV qualifying best at Runoffs 2015: 2:21.167 (Roger Siebenaler)FV qualifying best at Runoffs 2016: 1:37.942 (Alex Scaler)FV qualifying best at Runoffs 2017: 1:55.759 (Michael Varacins)FV qualifying best at Runoffs 2018: 1:52.637 (Skip Streets)FV qualifying best at Runoffs 2019: 2:15.712 (Andrew Whitston)FV qualifying best at Runoffs 2020: 2:43.994 (Hunter Phelps-Barron)FV qualifying best at Runoffs 2021: 1:57.479 (Andrew Whitston)FV qualifying best at Runoffs 2022: 2:15.116 (Brian Farnham)FV qualifying best at Runoffs 2023: 2:15.639 (Andrew Whitston)FV qualifying best at Runoffs 2024: 2:42.643 (Andrew Whitston)FV qualifying best at Runoffs 2025: 2:44.101 (Andrew Abbott)FV qualifying best at Runoffs 2026: 2:46.536 (Zachary Whitston)SM race best at Runoffs 2015: 2:24.067 (Todd Lamb)SM race best at Runoffs 2016: 1:40.764 (Michael Carter)SM race best at Runoffs 2017: 1:59.100 (Michael Gagliardo)SM race best at Runoffs 2018: 1:55.278 (Michael Carter)SM race best at Runoffs 2019: 2:16.459 (Elivan Goulart)SM race best at Runoffs 2020: 2:43.748 (Preston Pardus)SM race best at Runoffs 2021: 1:58.837 (Brian Henderson)SM race best at Runoffs 2022: 2:19.107 (Travis Wiley)SM race best at Runoffs 2023: 2:16.229 (Julian DaCosta)SM race best at Runoffs 2024: 2:41.486 (Brett Kowalski)SM race best at Runoffs 2025: 2:44.430 (Kyle Greenhill)SM race best at Runoffs 2026: 2:42.725 (Francisco Barroso)SM qualifying best at Runoffs 2015: 2:18.661 (Andrew Carbonell)SM qualifying best at Runoffs 2016: 1:40.514 (Justin Hille)SM qualifying best at Runoffs 2017: 1:58.306 (Chris Haldeman)SM qualifying best at Runoffs 2018: 1:54.355 (Ken Sutherland)SM qualifying best at Runoffs 2019: 2:14.552 (Todd Buras)SM qualifying best at Runoffs 2020: 2:42.209 (Kyle Greenhill)SM qualifying best at Runoffs 2021: 1:57.695 (Brian Henderson)SM qualifying best at Runoffs 2022: 2:14.664 (Danny Steyn)SM qualifying best at Runoffs 2023: 2:14.986 (Danny Steyn)SM qualifying best at Runoffs 2024: 2:41.106 (Ethan Goulart)SM qualifying best at Runoffs 2025: 2:43.111 (Bobby Gossett)SM qualifying best at Runoffs 2026: 2:42.173 (Brett Kowalski)P1 race best at Runoffs 2015: 1:49.792 (Gianpaolo Ciancimino)Off the chart: P1 race best at Runoffs 2016: 1:19.407 (Gianpaolo Ciancimino)P1 race best at Runoffs 2017: 1:31.499 (Jim Devenport)P1 race best at Runoffs 2018: 1:28.786 (Perry Richardson)P1 race best at Runoffs 2019: 1:43.498 (Todd Slusher)P1 race best at Runoffs 2020: 2:01.870 (James French)P1 race best at Runoffs 2021: 1:29.225 (Lee Alexander)P1 race best at Runoffs 2022: 1:54.095 (John Mcaleer)P1 race best at Runoffs 2023: 1:44.329 (Todd Vanacore)P1 race best at Runoffs 2024: 2:00.418 (Matt Romer)P1 qualifying best at Runoffs 2015: 1:49.219 (Jim Downing)Off the chart: P1 qualifying best at Runoffs 2016: 1:17.308 (James Devenport)P1 qualifying best at Runoffs 2017: 1:30.794 (Jim Devenport)P1 qualifying best at Runoffs 2018: 1:27.714 (Todd Slusher)P1 qualifying best at Runoffs 2019: 1:42.674 (Todd Slusher)P1 qualifying best at Runoffs 2020: 2:01.101 (James French)P1 qualifying best at Runoffs 2021: 1:29.011 (Lee Alexander)P1 qualifying best at Runoffs 2022: 1:41.601 (Todd Slusher)P1 qualifying best at Runoffs 2023: 1:42.602 (Todd Vanacore)P1 qualifying best at Runoffs 2024: 2:00.476 (Chip Romer)Daytona International Speedway · Runoffs 2015R2015Mid-Ohio Sports Car Course · Runoffs 2016R2016Indianapolis Motor Speedway · Runoffs 2017R2017Sonoma Raceway · Runoffs 2018R2018Virginia International Raceway · Runoffs 2019R2019Road America · Runoffs 2020R2020Indianapolis Motor Speedway · Runoffs 2021R2021Virginia International Raceway · Runoffs 2022R2022Virginia International Raceway · Runoffs 2023R2023Road America · Runoffs 2024R2024Road America · Runoffs 2025R2025Road America · Runoffs 2026R2026
FFFVSMP1solid race · dashed qualifying · slower is lower
90%100%110%27 rule changes between Runoffs 2018 and Runoffs 201927 ▾16 rule changes between Runoffs 2019 and Runoffs 202016 ▾15 rule changes between Runoffs 2020 and Runoffs 202115 ▾8 rule changes between Runoffs 2021 and Runoffs 20228 ▾9 rule changes between Runoffs 2022 and Runoffs 20239 ▾14 rule changes between Runoffs 2023 and Runoffs 202414 ▾8 rule changes between Runoffs 2024 and Runoffs 20258 ▾4 rule changes between Runoffs 2025 and Runoffs 20264 ▾FF race best at Runoffs 2015: 100.0% of FF's (Rick Payne)FF race best at Runoffs 2016: 100.0% of FF's (Neil Verhagen)FF race best at Runoffs 2017: 100.0% of FF's (Jonathon Kotyk)FF race best at Runoffs 2018: 100.0% of FF's (Jonathon Kotyk)FF race best at Runoffs 2019: 100.0% of FF's (Jonathan Kotyk)FF race best at Runoffs 2020: 100.0% of FF's (Jeffrey Bartz)FF race best at Runoffs 2021: 100.0% of FF's (Jonathan Kotyk)FF race best at Runoffs 2022: 100.0% of FF's (Jonathan Kotyk)FF race best at Runoffs 2023: 100.0% of FF's (Jonathan Kotyk)FF race best at Runoffs 2024: 100.0% of FF's (Sebastian Mateo Naranjo)FF race best at Runoffs 2025: 100.0% of FF's (Calvin Kautz)FF race best at Runoffs 2026: 100.0% of FF's (Nathan Down)FF qualifying best at Runoffs 2015: 100.0% of FF's (Tim Kautz)FF qualifying best at Runoffs 2016: 100.0% of FF's (Neil Verhagen)FF qualifying best at Runoffs 2017: 100.0% of FF's (Zach Holden)FF qualifying best at Runoffs 2018: 100.0% of FF's (Jonathon Kotyk)FF qualifying best at Runoffs 2019: 100.0% of FF's (Tyler O'Connor)FF qualifying best at Runoffs 2020: 100.0% of FF's (Simon Sikes)FF qualifying best at Runoffs 2021: 100.0% of FF's (Jonathan Kotyk)FF qualifying best at Runoffs 2022: 100.0% of FF's (Jonathan Kotyk)FF qualifying best at Runoffs 2023: 100.0% of FF's (Nolan Allaer)FF qualifying best at Runoffs 2024: 100.0% of FF's (Calvin Kautz)FF qualifying best at Runoffs 2025: 100.0% of FF's (Jonathan Kotyk)FF qualifying best at Runoffs 2026: 100.0% of FF's (David Ybarra)FV race best at Runoffs 2015: 114.4% of FF's (Andrew Whitston)FV race best at Runoffs 2016: 108.8% of FF's (Flinn Lazier)FV race best at Runoffs 2017: 110.9% of FF's (Michael Varacins)FV race best at Runoffs 2018: 111.4% of FF's (Alex Scaler)FV race best at Runoffs 2019: 98.4% of FF's (Zachary Whitston)FV race best at Runoffs 2020: 114.9% of FF's (Alex Scaler)FV race best at Runoffs 2021: 101.3% of FF's (Alex Scaler)FV race best at Runoffs 2022: 99.8% of FF's (Andrew Whitston)FV race best at Runoffs 2023: 113.3% of FF's (Andrew Abbott)FV race best at Runoffs 2024: 116.0% of FF's (Andrew Abbott)FV race best at Runoffs 2025: 114.6% of FF's (Zachary Whitston)FV race best at Runoffs 2026: 115.0% of FF's (Brian Farnham)FV qualifying best at Runoffs 2015: 115.2% of FF's (Roger Siebenaler)FV qualifying best at Runoffs 2016: 109.8% of FF's (Alex Scaler)FV qualifying best at Runoffs 2017: 110.7% of FF's (Michael Varacins)FV qualifying best at Runoffs 2018: 110.9% of FF's (Skip Streets)FV qualifying best at Runoffs 2019: 113.5% of FF's (Andrew Whitston)FV qualifying best at Runoffs 2020: 114.7% of FF's (Hunter Phelps-Barron)FV qualifying best at Runoffs 2021: 112.6% of FF's (Andrew Whitston)FV qualifying best at Runoffs 2022: 113.3% of FF's (Brian Farnham)FV qualifying best at Runoffs 2023: 113.7% of FF's (Andrew Whitston)FV qualifying best at Runoffs 2024: 114.1% of FF's (Andrew Whitston)FV qualifying best at Runoffs 2025: 113.2% of FF's (Andrew Abbott)FV qualifying best at Runoffs 2026: 116.4% of FF's (Zachary Whitston)SM race best at Runoffs 2015: 116.8% of FF's (Todd Lamb)SM race best at Runoffs 2016: 111.8% of FF's (Michael Carter)SM race best at Runoffs 2017: 113.9% of FF's (Michael Gagliardo)SM race best at Runoffs 2018: 113.0% of FF's (Michael Carter)SM race best at Runoffs 2019: 97.1% of FF's (Elivan Goulart)SM race best at Runoffs 2020: 113.5% of FF's (Preston Pardus)SM race best at Runoffs 2021: 102.7% of FF's (Brian Henderson)SM race best at Runoffs 2022: 100.5% of FF's (Travis Wiley)SM race best at Runoffs 2023: 113.0% of FF's (Julian DaCosta)SM race best at Runoffs 2024: 113.7% of FF's (Brett Kowalski)SM race best at Runoffs 2025: 113.0% of FF's (Kyle Greenhill)SM race best at Runoffs 2026: 113.3% of FF's (Francisco Barroso)SM qualifying best at Runoffs 2015: 113.2% of FF's (Andrew Carbonell)SM qualifying best at Runoffs 2016: 112.7% of FF's (Justin Hille)SM qualifying best at Runoffs 2017: 113.1% of FF's (Chris Haldeman)SM qualifying best at Runoffs 2018: 112.5% of FF's (Ken Sutherland)SM qualifying best at Runoffs 2019: 112.5% of FF's (Todd Buras)SM qualifying best at Runoffs 2020: 113.5% of FF's (Kyle Greenhill)SM qualifying best at Runoffs 2021: 112.8% of FF's (Brian Henderson)SM qualifying best at Runoffs 2022: 113.0% of FF's (Danny Steyn)SM qualifying best at Runoffs 2023: 113.2% of FF's (Danny Steyn)SM qualifying best at Runoffs 2024: 113.0% of FF's (Ethan Goulart)SM qualifying best at Runoffs 2025: 112.6% of FF's (Bobby Gossett)SM qualifying best at Runoffs 2026: 113.4% of FF's (Brett Kowalski)P1 race best at Runoffs 2015: 89.0% of FF's (Gianpaolo Ciancimino)P1 race best at Runoffs 2016: 88.1% of FF's (Gianpaolo Ciancimino)P1 race best at Runoffs 2017: 87.5% of FF's (Jim Devenport)P1 race best at Runoffs 2018: 87.0% of FF's (Perry Richardson)Off the chart: P1 race best at Runoffs 2019: 73.7% of FF's (Todd Slusher)P1 race best at Runoffs 2020: 84.5% of FF's (James French)Off the chart: P1 race best at Runoffs 2021: 77.1% of FF's (Lee Alexander)P1 race best at Runoffs 2022: 82.5% of FF's (John Mcaleer)P1 race best at Runoffs 2023: 86.5% of FF's (Todd Vanacore)P1 race best at Runoffs 2024: 84.8% of FF's (Matt Romer)P1 qualifying best at Runoffs 2015: 89.2% of FF's (Jim Downing)P1 qualifying best at Runoffs 2016: 86.7% of FF's (James Devenport)P1 qualifying best at Runoffs 2017: 86.8% of FF's (Jim Devenport)P1 qualifying best at Runoffs 2018: 86.3% of FF's (Todd Slusher)P1 qualifying best at Runoffs 2019: 85.9% of FF's (Todd Slusher)P1 qualifying best at Runoffs 2020: 84.7% of FF's (James French)P1 qualifying best at Runoffs 2021: 85.3% of FF's (Lee Alexander)P1 qualifying best at Runoffs 2022: 85.2% of FF's (Todd Slusher)P1 qualifying best at Runoffs 2023: 86.0% of FF's (Todd Vanacore)P1 qualifying best at Runoffs 2024: 84.5% of FF's (Chip Romer)Daytona International Speedway · Runoffs 2015R2015Mid-Ohio Sports Car Course · Runoffs 2016R2016Indianapolis Motor Speedway · Runoffs 2017R2017Sonoma Raceway · Runoffs 2018R2018Virginia International Raceway · Runoffs 2019R2019Road America · Runoffs 2020R2020Indianapolis Motor Speedway · Runoffs 2021R2021Virginia International Raceway · Runoffs 2022R2022Virginia International Raceway · Runoffs 2023R2023Road America · Runoffs 2024R2024Road America · Runoffs 2025R2025Road America · Runoffs 2026R2026
FFFVSMP1solid race · dashed qualifying · each class's best lap as a share of FF's at the same event (the reference class, changeable above); 100% is level, less is quicker, so up the chart is quicker
EventFFFVSMP1
Qual best Race best Trap Qual best Race best Trap vs FF % of FF Qual best Race best Trap vs FF % of FF Qual best Race best Trap vs FF % of FF 
Road America Runoffs 20262026-09-282:23.047David Ybarra · fastest of 20 · top 5 within 1.4s-1.858s (-1.28%)2:23.686Nathan Down · fastest of 20 · top 5 within 1.6s-1.855s (-1.27%)138.9Tazio Stefanelli+0.5 mph (+0.3%)2:46.536Zachary Whitston · fastest of 37 · top 5 within 1.7s+2.435s (+1.48%)2:45.272Brian Farnham · fastest of 34 · top 5 within 1.3s-1.464s (-0.88%)117.4Rick Shields+0.2 mph (+0.1%)+21.586squal +23.489s115.0%qual 116.4%2:42.173Brett Kowalski · fastest of 34 · top 5 within 0.3s-0.938s (-0.58%)2:42.725Francisco Barroso · fastest of 35 · top 5 within 0.2s-1.705s (-1.04%)119.6Wyatt Couch+0.3 mph (+0.3%)+19.039squal +19.126s113.3%qual 113.4%
4 rule changes (FF: 2, SM: 2)1 tyres & wheels · 2 wording · 1 other · FF Kent 1600 compression ratio calculation parameters reorganized: bore size and valve protrusion limits moved to separate subsections for clarity. · SM/SMX Mazda rear toe link part number revised from 0000-04-5361426 to 0000-04-5361. · SM/SMX part number 0000-10-6900 replaced with 0000-06-5016-KT in GCR 9.1.7.C.1.j.1.c. · FF clarifies alternative tire eligibility: homologated 1989 or earlier with rocker or outboard suspension all four corners; push-rod/pull-rod cars may seek approval.showhide
  • FF Clarification in FF Kent 1600 Compression Ratio Paragraph #40293wordingwordingFF Kent 1600 compression ratio calculation parameters reorganized: bore size and valve protrusion limits moved to separate subsections for clarity.
  • SM Rear Toe Link #40271wordingwordingSM/SMX Mazda rear toe link part number revised from 0000-04-5361426 to 0000-04-5361.
  • SM Part Number Change Request #39914otherunclearSM/SMX part number 0000-10-6900 replaced with 0000-06-5016-KT in GCR 9.1.7.C.1.j.1.c.
  • FF Formula F Alternative Tire Rule Proposed Clarifications #39281tyres & wheelsaddedtyres & wheelsFF clarifies alternative tire eligibility: homologated 1989 or earlier with rocker or outboard suspension all four corners; push-rod/pull-rod cars may seek approval.
Road America Runoffs 20252025-09-292:24.905Jonathan Kotyk · fastest of 17 · top 5 within 1.1s+2.353s (+1.65%)2:25.541Calvin Kautz · fastest of 16 · top 5 within 0.5s+3.484s (+2.45%)138.4Tazio Stefanelli-2.3 mph (-1.6%)2:44.101Andrew Abbott · fastest of 34 · top 5 within 1.3s+1.458s (+0.90%)2:46.736Zachary Whitston · fastest of 29 · top 5 within 0.6s+1.902s (+1.15%)117.2Zachary Whitston+0.7 mph (+0.6%)+21.195squal +19.196s114.6%qual 113.2%2:43.111Bobby Gossett · fastest of 32 · top 5 within 0.3s+2.005s (+1.24%)2:44.430Kyle Greenhill · fastest of 28 · top 5 within 0.3s+2.944s (+1.82%)119.3Francisco Barroso-0.6 mph (-0.5%)+18.889squal +18.206s113.0%qual 112.6%
8 rule changes (FF: 4, SM: 4)2 tyres & wheels · 1 engine · 1 weight · 3 wording · 1 other · SMX drivers must submit data acquisition files on time or face suspension and $250 fine. · SMX penalty language clarified: level 1 and 3 infractions may carry $1,000 fines, level 2 and 4 may carry $500 fines. · FF adds rocker arm and outboard suspension cars option to use Hoosier bias ply slicks or VFF tyres; clarifies mixing rules. · SM tire marking rules clarified: one Hoosier SM 7.5 P205/50/ZR17 set per Super Tour weekend, impound after first dry session, damaged tires may be replaced with used tires only. · FF adds alternative tire options for older cars with rocker arm or outboard suspension: bias ply slicks or VFF radials. · SMX OE instrument cluster must stay unmodified and connected; aftermarket dash allowed if wiring only re-routed; alternate gauges now permitted; foot pedal comfort mods allowed without relocation. · FF and FC sequential gearbox weight penalty reduces from 25 lbs to 10 lbs minimum weight addition. · FF Honda Fit pistons: OEM 0.25mm oversize PN 13020-RB7-Z00 or Fast Forward PN FF800-110 now both allowed; standard diameter 73.240mm (2.8835 inches), minimum weight 198.0g.showhide
  • SM SMX Data Submission - Penalties #38248otheraddedSMX drivers must submit data acquisition files on time or face suspension and $250 fine.
  • SM Committee) SMX Penaly Clarification updated language #38337wordingwordingSMX penalty language clarified: level 1 and 3 infractions may carry $1,000 fines, level 2 and 4 may carry $500 fines.
  • FF Page 228, FF tire rule 9.1.1.10.e #38251tyres & wheelsaddedtyres & wheelsFF adds rocker arm and outboard suspension cars option to use Hoosier bias ply slicks or VFF tyres; clarifies mixing rules.
  • SM Clarify Tire Marking Regs #38005wordingwordingSM tire marking rules clarified: one Hoosier SM 7.5 P205/50/ZR17 set per Super Tour weekend, impound after first dry session, damaged tires may be replaced with used tires only.
  • FF Formula F Proposal to Invite Older Cars Via a Tire Rule Change #37802tyres & wheelsaddedtyres & wheelsFF adds alternative tire options for older cars with rocker arm or outboard suspension: bias ply slicks or VFF radials.
  • SM E&O SMX Regs 9.1.7.1.D.5.u-.w #37070wordingwordingSMX OE instrument cluster must stay unmodified and connected; aftermarket dash allowed if wiring only re-routed; alternate gauges now permitted; foot pedal comfort mods allowed without relocation.
  • FF Change FF/FC Weight with Sequential Gearbox #36651weightfasterweightFF and FC sequential gearbox weight penalty reduces from 25 lbs to 10 lbs minimum weight addition.
  • FF Alternative Oversize Honda Fit Pistons #37064engineaddedengineFF Honda Fit pistons: OEM 0.25mm oversize PN 13020-RB7-Z00 or Fast Forward PN FF800-110 now both allowed; standard diameter 73.240mm (2.8835 inches), minimum weight 198.0g.
Road America Runoffs 20242024-10-012:22.552Calvin Kautz · fastest of 13 · top 5 within 1.1s-0.364s (-0.25%)2:22.057Sebastian Mateo Naranjo · fastest of 13 · top 5 within 0.6s-2.211s (-1.53%)140.7Calvin Kautz+2.6 mph (+1.9%)2:42.643Andrew Whitston · fastest of 27 · top 5 within 2.3s-1.351s (-0.82%)2:44.834Andrew Abbott · fastest of 27 · top 5 within 0.9s-0.982s (-0.59%)116.5Brian Farnham-0.7 mph (-0.6%)+22.777squal +20.091s116.0%qual 114.1%2:41.106Ethan Goulart · fastest of 49 · top 5 within 0.5s-1.103s (-0.68%)2:41.486Brett Kowalski · fastest of 43 · top 5 within 0.3s-2.262s (-1.38%)119.9Alex Bertagnoli-1.4 mph (-1.2%)+19.429squal +18.554s113.7%qual 113.0%2:00.476Chip Romer · fastest of 12 · top 5 within 1.5s-0.625s (-0.52%)2:00.418Matt Romer · fastest of 9 · top 5 within 2.1s-1.452s (-1.19%)168.3Jason Miller+8.7 mph (+5.4%)-21.639squal -22.076s84.8%qual 84.5%
14 rule changes (FF: 2, FV: 2, SM: 4, P1: 6)2 engine · 2 weight · 9 wording · 1 other · FF EGR blanking plate rule clarified: VTEC activation valve must be retained and functioning, no modifications permitted. · FV ferrous rotor must not be cross-drilled; pad cleaning grooves limit unchanged at three per side. · SMX Spec MX-5 camera requirement: non-functioning recorder now will instead of may warrant penalty or disqualification. · SM and SMX must run latest AIM Data Logger Spec MX-5 ECU Protocol, effective 2024-09-01. · SMX Mazda MX-5 OE versus OEM definitions clarified in GCR section 9.1.7.1; wording change only. · SM and SMX now allow an alternate shifter bushing at the bottom of the shift lever. · P1 engine approval process wording clarified; unspecified engines need case-by-case Board review. · P1 removes redundant effective date language from ECU stall prohibition rule. · P1 Honda K20A-FD2 engine terminology corrected from 'spec' to proper series designation; FIA certification documentation requirement removed. · FF Honda Fit gains Fast Forward oversize piston ring option PN FF800-100 as alternative to Riken or Nippon. · P1 Engine Table line H restrictor grows to 32 mm, weight rises to 1450 lbs; line I restrictor to 31 mm, weight to 1475 lbs. · P1 Group CN Honda K20A-FD2 removes engine modification restrictions; CRB may add intake restrictor if needed. · FV front wheel bearings wording clarified; specification unchanged.showhide
  • FF Update to FF EGR Blanking Plate Rule #36633wordingwordingFF EGR blanking plate rule clarified: VTEC activation valve must be retained and functioning, no modifications permitted.
  • FV Disc Brakes #36822wordingwordingFV ferrous rotor must not be cross-drilled; pad cleaning grooves limit unchanged at three per side.
  • SM SMX Camera Rule Correction #36496wordingwordingSMX Spec MX-5 camera requirement: non-functioning recorder now will instead of may warrant penalty or disqualification.
  • SM Committee) AIM ECU Protocol #36556engineaddedengineSM and SMX must run latest AIM Data Logger Spec MX-5 ECU Protocol, effective 2024-09-01.
  • SM Committee) OE versus OEM Definitons #36608wordingwordingSMX Mazda MX-5 OE versus OEM definitions clarified in GCR section 9.1.7.1; wording change only.
  • SM Committee) Shifter Bushing #36611otheraddedSM and SMX now allow an alternate shifter bushing at the bottom of the shift lever.
  • P1 Update GCR section 9.1.8.B.J.7 #35907wordingwordingP1 engine approval process wording clarified; unspecified engines need case-by-case Board review.
  • P1 Remove redundant effective date language in GCR 9.1.8.B.J.4 #35693wordingwordingP1 removes redundant effective date language from ECU stall prohibition rule.
  • P1 Correct engine series terminology #35694wordingwordingP1 Honda K20A-FD2 engine terminology corrected from 'spec' to proper series designation; FIA certification documentation requirement removed.
  • FF Honda Fit Oversize Piston Rings #35305engineaddedengineFF Honda Fit gains Fast Forward oversize piston ring option PN FF800-100 as alternative to Riken or Nippon.
  • P1 Please correct omitted punctuation #34890weight
  • P1 Adjust restrictors and weights for Engine Table lines H and I #35229weightslowerweightP1 Engine Table line H restrictor grows to 32 mm, weight rises to 1450 lbs; line I restrictor to 31 mm, weight to 1475 lbs.
  • P1 Revise Group CN Honda K20A-FD2 Spec Line #35337wordingunclearP1 Group CN Honda K20A-FD2 removes engine modification restrictions; CRB may add intake restrictor if needed.
  • FV FV Wheel Bearing Clarification #35150wordingwordingFV front wheel bearings wording clarified; specification unchanged.
Virginia International Raceway Runoffs 20232023-09-231:59.249Nolan Allaer · fastest of 8 · top 5 within 2.8s+0.034s (+0.03%)2:00.583Jonathan Kotyk · fastest of 8 · top 5 within 0.4s-17.775s (-12.85%)138.4Calvin Kautz+0.1 mph (+0.1%)2:15.639Andrew Whitston · fastest of 27 · top 5 within 1.4s+0.523s (+0.39%)2:16.611Andrew Abbott · fastest of 23 · top 5 within 1.6s-1.482s (-1.07%)115.6Brian Farnham-0.2 mph (-0.2%)+16.028squal +16.390s113.3%qual 113.7%2:14.986Danny Steyn · fastest of 52 · top 5 within 0.1s+0.322s (+0.24%)2:16.229Julian DaCosta · fastest of 46 · top 5 within 0.3s-2.878s (-2.07%)120.3Jim Drago+1.1 mph (+0.9%)+15.646squal +15.737s113.0%qual 113.2%1:42.602Todd Vanacore · fastest of 10 · top 5 within 0.9s+1.001s (+0.99%)1:44.329Todd Vanacore · fastest of 9 · top 5 within 0.7s-9.766s (-8.56%)158.5Jason Miller+1.2 mph (+0.8%)-16.254squal -16.647s86.5%qual 86.0%
9 rule changes (FF: 1, SM: 1, P1: 7)2 aero · 2 engine · 1 weight · 4 wording · P1 SIR testing: vehicle deemed compliant if it stalls within 3 seconds of the stall test. · P1 intake restrictor rule clarified: flat plate, venturi, or Single Inlet Restrictor required; all intake air must pass through. · P1 ducted air rule clarified: top-exit ducted air must pass through heat exchanger, except cockpit opening and engine bay vents. · P1 aero height limit, front/rear overhang, and cockpit dimensions corrected to metric-inch equivalents. · FF Honda Fit engine adds Fast Forward part number alternatives for intake, exhaust, oil system, and scavenge pump components. · P1 suspension covers must have symmetrical upper and lower surfaces, no airfoil cross-sections or angled downforce. · SM Mazda MX-5 Miata 01-05 minimum weight rises to 2450 lbs, or 2465 with alternate bore. · P1 aerodynamic devices may not extend more than 1cm below lower surfaces rear of front axle; body panels covering suspension must not be airfoil-shaped or create downforce. · P1 forced induction prohibited: turbocharging and supercharging not allowed.showhide
  • P1 SIR Testing #34354wordingwordingP1 SIR testing: vehicle deemed compliant if it stalls within 3 seconds of the stall test.
  • P1 E&O Single Inlet Restrictor abbreviation, etc. #34369wordingwordingP1 intake restrictor rule clarified: flat plate, venturi, or Single Inlet Restrictor required; all intake air must pass through.
  • P1 E&O Clean up ducted air provision #34410wordingwordingP1 ducted air rule clarified: top-exit ducted air must pass through heat exchanger, except cockpit opening and engine bay vents.
  • P1 E&O - Correct dimensional equivalents #34018wordingwordingP1 aero height limit, front/rear overhang, and cockpit dimensions corrected to metric-inch equivalents.
  • FF Add Fast Forward Part Numbers for Honda Fit Engine #33752engineaddedengineFF Honda Fit engine adds Fast Forward part number alternatives for intake, exhaust, oil system, and scavenge pump components.
  • P1 November 2022 Rules Clarification for Suspension Covers #33615aerosloweraeroP1 suspension covers must have symmetrical upper and lower surfaces, no airfoil cross-sections or angled downforce.
  • SM BOP for NB1 and NB2 #32309weightslowerweightSM Mazda MX-5 Miata 01-05 minimum weight rises to 2450 lbs, or 2465 with alternate bore.
  • P1 Clarify body panel coverage of suspension components #33318aeroaeroP1 aerodynamic devices may not extend more than 1cm below lower surfaces rear of front axle; body panels covering suspension must not be airfoil-shaped or create downforce.
  • P1 E&O clarification regarding forced induction #33123engineremovedengineP1 forced induction prohibited: turbocharging and supercharging not allowed.
Virginia International Raceway Runoffs 20222022-09-241:59.215Jonathan Kotyk · fastest of 13 · top 5 within 1.2s-0.348s (-0.29%)2:18.358Jonathan Kotyk · fastest of 12 · top 5 within 2.4s-2.116s (-1.51%)138.3Tim Kautz+2.2 mph (+1.6%)2:15.116Brian Farnham · fastest of 29 · top 5 within 1.1s-0.596s (-0.44%)2:18.093Andrew Whitston · fastest of 28 · top 5 within 1.2s-0.196s (-0.14%)115.8Jonathan Weisheit+1.1 mph (+0.9%)-0.265squal +15.901s99.8%qual 113.3%2:14.664Danny Steyn · fastest of 60 · top 5 within 0.2s+0.112s (+0.08%)2:19.107Travis Wiley · fastest of 58 · top 5 within 0.9s+2.648s (+1.94%)119.2Jonathan Neudorf-0.6 mph (-0.5%)+0.749squal +15.449s100.5%qual 113.0%1:41.601Todd Slusher · fastest of 9 · top 5 within 2.3s-1.073s (-1.05%)1:54.095John Mcaleer · fastest of 9 · top 5 within 1.4s+10.597s (+10.24%)157.2Jason Miller+1.3 mph (+0.8%)-24.263squal -17.614s82.5%qual 85.2%
8 rule changes (FV: 4, SM: 1, P1: 3)4 engine · 4 wording · P1 motorcycle-based engines with individual throttle bodies must use flat plate intake restrictors within 4 inches of primary butterfly. · P1 bodywork rules clarified: cycle fenders prohibited, side body minimum height at front axle centerline, air ducting for downforce banned. · SM Majors must run authorized Penske shock and mount; Regional competitors not required until further evaluation. · FV connecting rod options expanded to include BrianCrower part BC6417 and Newland Group part 4M113077. · FV connecting rods minimum weight 425.0 grams, center-to-center length 130 +0.10/-0.25 mm; Crower, BrianCrower, Newland Group parts allowed if meeting specs. · FV Crower connecting rods SP93280B and BC6417 allowed as direct replacement, must meet OEM minimum weight. · P1 2-cycle 6-cylinder maximum displacement increases to 1725 cc, restrictor shrinks to 40mm, minimum weight drops to 1275 lbs. · FV allows Crower SP93280B and Brian Crower Racing Rods connecting rods as direct replacements, matching OEM minimum weight.showhide
  • P1 Clarify authorization to use flat plate intake restrictor #32964engineaddedengineP1 motorcycle-based engines with individual throttle bodies must use flat plate intake restrictors within 4 inches of primary butterfly.
  • P1 E&O Clarification of Bodywork Rules #32468wordingwordingP1 bodywork rules clarified: cycle fenders prohibited, side body minimum height at front axle centerline, air ducting for downforce banned.
  • SM Update GCR Section 9.1.7.3.A.1. #32217wordingwordingSM Majors must run authorized Penske shock and mount; Regional competitors not required until further evaluation.
  • FV Connecting Rod Update Request for 9.1.1.C Formula Vee (FV) 5.C.6 #32160engineaddedengineFV connecting rod options expanded to include BrianCrower part BC6417 and Newland Group part 4M113077.
  • FV E&O clarification of connecting rod center-to-center length #32183wordingwordingFV connecting rods minimum weight 425.0 grams, center-to-center length 130 +0.10/-0.25 mm; Crower, BrianCrower, Newland Group parts allowed if meeting specs.
  • FV Update direct replacement connecting rod information #31843wordingwordingFV Crower connecting rods SP93280B and BC6417 allowed as direct replacement, must meet OEM minimum weight.
  • P1 Displacement & Weight Change Request for 2-Cycle 6 Cylinder #31609enginefasterengineP1 2-cycle 6-cylinder maximum displacement increases to 1725 cc, restrictor shrinks to 40mm, minimum weight drops to 1275 lbs.
  • FV Formula V Connecting Rod Replacement #31448engineaddedengineFV allows Crower SP93280B and Brian Crower Racing Rods connecting rods as direct replacements, matching OEM minimum weight.
Indianapolis Motor Speedway Runoffs 20212021-09-251:44.359Jonathan Kotyk · fastest of 24 · top 5 within 1.1s-0.242s (-0.23%)1:55.676Jonathan Kotyk · fastest of 23 · top 5 within 1.8s+11.152s (+10.67%)141.6Nicholas Sheppard1:57.479Andrew Whitston · fastest of 48 · top 5 within 0.8s+1.720s (+1.49%)1:57.234Alex Scaler · fastest of 47 · top 5 within 1.0s+1.311s (+1.13%)124.0Mark Edwards+1.558squal +13.120s101.3%qual 112.6%1:57.695Brian Henderson · fastest of 90 · top 5 within 0.5s-0.611s (-0.52%)1:58.837Brian Henderson · fastest of 88 · top 5 within 0.3s-0.263s (-0.22%)119.8Kyle Greenhill+3.161squal +13.336s102.7%qual 112.8%1:29.011Lee Alexander · fastest of 13 · top 5 within 2.5s-1.783s (-1.96%)1:29.225Lee Alexander · fastest of 12 · top 5 within 3.5s-2.274s (-2.49%)160.1Jason Miller-26.451squal -15.348s77.1%qual 85.3%
15 rule changes (FF: 3, SM: 1, P1: 11)2 cars added · 2 engine · 10 wording · 1 other · P1 creates separate spec lines H and I for 2000cc and 2300cc engines at 1400 and 1445 lbs minimum weight respectively. · P1 Staudacher may run 950 lbs minimum weight with 38.5mm flat plate intake restrictor, removing prior weight-linked restrictor rule. · P1 adds 1355cc motorcycle-based engine line C at 1075 lbs minimum weight, no restrictor required. · P1 cockpit opening section allows tonneau covers to meet minimum dimensions; wording clarified on equipment attachment. · P1 Staudacher 1005cc homologated before 1-1-2014 may run 38.5mm flat plate intake restrictor at 950 lbs minimum weight. · P1 Spec Line C: FPIR not required at 1150 lbs, 1355cc max may run without FPIR at 1075 lbs. Spec Line G: up to 2000cc runs 30mm SIR at 1400 lbs, 2300cc runs 30mm SIR at 1445 lbs. · P1 classes B, C, D maximum valves per cylinder set to 4, previously unspecified. · FF block relief permitted only as needed to fit an allowed crankshaft. · P1 Spec Line A clarifies carburetor induction only, one per cylinder, balance tubes not allowed. · P1 Spec Line H notes clarify peripheral port or bridgeport allowed; wording only. · SM adds procedure for CRB-approved obsolete parts and BOP testing in sanctioned events with point forfeiture. · P1 Elan DP02-spec Mazda MZR sealed engine option removed effective 3/1/2021. · P1 Engine Table Spec Lines C and G change 'inlet restrictor' to 'intake restrictor' terminology. · FF class cylinder head now permits optional coolant bleed line pipe thread fitting to swirl tower. · FF Honda LC1 ECU supplied by HPD is permitted effective 12/1/2020 with HPD lambda sensor.showhide
  • P1 Move 2000cc and 2300cc engine options to individual spec lines #31012cars addedaddedP1 creates separate spec lines H and I for 2000cc and 2300cc engines at 1400 and 1445 lbs minimum weight respectively.
  • P1 E&O Spec Line B notes #31095wordingwordingP1 Staudacher may run 950 lbs minimum weight with 38.5mm flat plate intake restrictor, removing prior weight-linked restrictor rule.
  • P1 Add 1355cc spec line #30890cars addedaddedP1 adds 1355cc motorcycle-based engine line C at 1075 lbs minimum weight, no restrictor required.
  • P1 E&O tonneau cover provision in cockpit opening section #30458wordingwordingP1 cockpit opening section allows tonneau covers to meet minimum dimensions; wording clarified on equipment attachment.
  • P1 Update Spec Line B Notes #30498wordingwordingP1 Staudacher 1005cc homologated before 1-1-2014 may run 38.5mm flat plate intake restrictor at 950 lbs minimum weight.
  • P1 Update Spec Lines C and G notes #30499wordingwordingP1 Spec Line C: FPIR not required at 1150 lbs, 1355cc max may run without FPIR at 1075 lbs. Spec Line G: up to 2000cc runs 30mm SIR at 1400 lbs, 2300cc runs 30mm SIR at 1445 lbs.
  • P1 E&O Maximum Valves Per Cylinder #30559engineengineP1 classes B, C, D maximum valves per cylinder set to 4, previously unspecified.
  • FF Kent crankshaft clarification #30426wordingwordingFF block relief permitted only as needed to fit an allowed crankshaft.
  • P1 Clean up Spec Line A notes section #30424wordingwordingP1 Spec Line A clarifies carburetor induction only, one per cylinder, balance tubes not allowed.
  • P1 Clean up Spec Line H notes section #30425wordingwordingP1 Spec Line H notes clarify peripheral port or bridgeport allowed; wording only.
  • SM Updates - Obsolete Parts & BOP Parts #30438wordingaddedSM adds procedure for CRB-approved obsolete parts and BOP testing in sanctioned events with point forfeiture.
  • P1 DP02 Sealed 2ltr Engine Option #30038engineremovedengineP1 Elan DP02-spec Mazda MZR sealed engine option removed effective 3/1/2021.
  • P1 E&O restrictor terminology #30285wordingwordingP1 Engine Table Spec Lines C and G change 'inlet restrictor' to 'intake restrictor' terminology.
  • FF Allow Optional Coolant Bleed Line to Correct a Known Problem #29673otheraddedFF class cylinder head now permits optional coolant bleed line pipe thread fitting to swirl tower.
  • FF Clarification regarding Honda LC1 ECU implementation date #29684wordingwordingFF Honda LC1 ECU supplied by HPD is permitted effective 12/1/2020 with HPD lambda sensor.
Road America Runoffs 20202020-10-022:22.916Simon Sikes · fastest of 14 · top 5 within 1.6s2:24.268Jeffrey Bartz · fastest of 14 · top 5 within 0.4s138.1Jeffrey Bartz2:43.994Hunter Phelps-Barron · fastest of 28 · top 5 within 0.6s2:45.816Alex Scaler · fastest of 24 · top 5 within 1.5s117.1Hunter Phelps-Barron+21.548squal +21.078s114.9%qual 114.7%2:42.209Kyle Greenhill · fastest of 77 · top 5 within 0.5s2:43.748Preston Pardus · fastest of 75 · top 5 within 1.0s121.3Kyle Greenhill+19.480squal +19.293s113.5%qual 113.5%2:01.101James French · fastest of 18 · top 5 within 1.1s2:01.870James French · fastest of 17 · top 5 within 1.8s159.7David Locke-22.398squal -21.815s84.5%qual 84.7%
16 rule changes (FF: 4, FV: 6, SM: 2, P1: 4)6 tyres & wheels · 3 engine · 1 cars added · 1 induction · 1 removed · 1 suspension & brakes · 3 wording · SM allows aftermarket radiators in original location with stock OEM cooling fan, and permits 1990-1997 cars to install upper radiator seal NA75-50-OK7A. · FF Honda LC1 ECU implementation date clarified to pending, contingent on SCCA receiving sufficient support materials. · SM rear brake caliper may use single bracket under upper retaining bolt head to prevent pin failure. · FV now permits 4 bolt wheels in addition to existing specifications. · FV now allows 4-bolt pattern wheels in addition to existing specifications. · P1 intake manifolds unrestricted unless engine requires flat plate restrictor; no plenums or balance pipes on restricted individual runner manifolds. · FF Kent Engine alternator becomes optional instead of not required. · FF permits HPD LC1 ECU with lambda sensor; E1 ECU no longer supported but existing units may continue. · FF rain tyres now allow Hoosier W3 Radial 185/60R13 front and 205/60R13 rear. · FV rain tyre changes to Hoosier #44266 22.5 x 5.0 x 15 WET or W3. · P1 sealed 2.0L Elan DP02-spec Mazda option removal date extended from 1/1/2020 to 1/1/2021. · FV allows non-spec Hoosier tyres at Regional races only; Majors, Super Tour, and Runoffs require spec tyres from 1/1/2020. · Formula Vee now allows 22.5 x 5.5 x 15 rear tires on front axle; rain tire mandated as Hoosier #44266 22.5 x 5.0 x 15 from 1/1/2020. · P1 sealed 2.0 MZR engine removed effective 1/1/2020; competitors may run it under Spec Line G. · P1 Spec Line F: Restricted 2.0L Group becomes CN-spec Honda K20A-FD2, 2000cc, 1400 lbs minimum. · FV wheels may now be 15-inch 4.5J steel VW with same 5-bolt pattern as standard 4J, within track limits.showhide
  • SM Radiator E&O Clarifications #29294wordingwordingSM allows aftermarket radiators in original location with stock OEM cooling fan, and permits 1990-1997 cars to install upper radiator seal NA75-50-OK7A.
  • FF Clarification regarding Honda LC1 ECU implementation #29135wordingwordingFF Honda LC1 ECU implementation date clarified to pending, contingent on SCCA receiving sufficient support materials.
  • SM Modifications to prevent failures of Rear Brake Caliper Pin #28953suspension & brakessuspension & brakesSM rear brake caliper may use single bracket under upper retaining bolt head to prevent pin failure.
  • FV Support for Recommended Item - 4 bolt wheels in FV #29084cars addedaddedFV now permits 4 bolt wheels in addition to existing specifications.
  • FV Support for 4-bolt pattern wheels #28955 #29118tyres & wheelsaddedtyres & wheelsFV now allows 4-bolt pattern wheels in addition to existing specifications.
  • P1 E&O minimum weights and intake manifolds #28731inductioninductionP1 intake manifolds unrestricted unless engine requires flat plate restrictor; no plenums or balance pipes on restricted individual runner manifolds.
  • FF E&O FF Kent Engine alternator language #28204engineaddedengineFF Kent Engine alternator becomes optional instead of not required.
  • FF Honda Racing HPD low cost ECU proposal #27563engineaddedengineFF permits HPD LC1 ECU with lambda sensor; E1 ECU no longer supported but existing units may continue.
  • FF Update rain tire designation #28443tyres & wheelsaddedtyres & wheelsFF rain tyres now allow Hoosier W3 Radial 185/60R13 front and 205/60R13 rear.
  • FV Update rain tire designation #28444tyres & wheelstyres & wheelsFV rain tyre changes to Hoosier #44266 22.5 x 5.0 x 15 WET or W3.
  • P1 Extend date for removing sealed DP02-spec 2.0L option #28046wordingunclearP1 sealed 2.0L Elan DP02-spec Mazda option removal date extended from 1/1/2020 to 1/1/2021.
  • FV FV Allow non-spec tire in Regional competition #26284tyres & wheelsaddedtyres & wheelsFV allows non-spec Hoosier tyres at Regional races only; Majors, Super Tour, and Runoffs require spec tyres from 1/1/2020.
  • FV Request to Allow Rear Tires on the Front of Formula Vee #26537tyres & wheelsaddedtyres & wheelsFormula Vee now allows 22.5 x 5.5 x 15 rear tires on front axle; rain tire mandated as Hoosier #44266 22.5 x 5.0 x 15 from 1/1/2020.
  • P1 Remove sealed DP02-spec 2.0 MZR spec #26753removedremovedP1 sealed 2.0 MZR engine removed effective 1/1/2020; competitors may run it under Spec Line G.
  • P1 Update Revised Spec Line F #27745engineengineP1 Spec Line F: Restricted 2.0L Group becomes CN-spec Honda K20A-FD2, 2000cc, 1400 lbs minimum.
  • FV Clarification on Wheel Bolt Pattern #27603tyres & wheelsaddedtyres & wheelsFV wheels may now be 15-inch 4.5J steel VW with same 5-bolt pattern as standard 4J, within track limits.
Virginia International Raceway Runoffs 20192019-10-051:59.563Tyler O'Connor · fastest of 14 · top 5 within 1.4s2:20.474Jonathan Kotyk · fastest of 14 · top 5 within 6.3s136.2Derek Ketchie2:15.712Andrew Whitston · fastest of 26 · top 5 within 1.5s2:18.289Zachary Whitston · fastest of 19 · top 5 within 0.4s114.8Roger Siebenaler-2.185squal +16.149s98.4%qual 113.5%2:14.552Todd Buras · fastest of 60 · top 5 within 0.2s2:16.459Elivan Goulart · fastest of 56 · top 5 within 0.4s119.8Jim Drago-4.015squal +14.989s97.1%qual 112.5%1:42.674Todd Slusher · fastest of 14 · top 5 within 1.5s1:43.498Todd Slusher · fastest of 13 · top 5 within 1.0s155.9Jim Devenport-36.976squal -16.889s73.7%qual 85.9%
27 rule changes (FF: 3, FV: 6, SM: 4, P1: 14)1 aero · 1 cars added · 1 engine · 1 suspension & brakes · 1 tyres & wheels · 1 weight · 18 wording · 3 other · FV exhaust exit opening repositioned: minimum one inch, maximum four inches behind rear body. · FV allows fifteen-inch steel wheels at 4J or 4.5J width, standard VW sedan or within track dimensions. · P1 traction control prohibited. · P1 permits mechanical, solenoid, and air-shifters; prohibits electronic pre-selection and multi-wheel power. · P1 minimum bodywork height rule moved and restated with new 115cm aerodynamic part height limit. · P1 consolidates fender louver rules into one section; removes duplicate allowance for louvers and clarifies brake and engine air ducts are permitted. · FV exhaust outlet opening max distance from body rear increased from 3 to 4 inches. · P1 anti-intrusion panels now allowed anywhere on chassis sides instead of specified locations. · P1 bodywork wording clarified: comfort and safety for driver and passenger or driver only. · FV front track maximum 52.500 inches; rear track 49.125–50.750 inches; spacers now allowed. · P1 Engine Table reference cleaned up; no performance change. · P1 Mazda Renesis Rotary engine spec line removed from Engine Table. · FV disc brake assembly minimum weight clarified to 16.5 lbs total; caliper minimum weight requirement of 1.65 lbs removed. · P1 Staudacher and Honda K20A-FD2 engine table wording clarified; no performance change. · P1 closed cockpit single-seat cars remain prohibited; rule moved from subsection J.5 to B.4. · SM fuel pump and filter now permitted as Mazda or OEM equivalent part. · FF Honda Fit cylinder honing increased to 73.315mm and oversize pistons PN 13020-RB7-Z00 now permitted with matching ring packs. · FF intake manifold thermal wrap now permitted if easily removable for inspection; no coating allowed. · FF clarifies coolant and oil catch tank capacity requirements: coolant minimum one U.S. pint, oil minimum one U.S. quart per system. · FV intake manifold horizontal tube measurement location clarified; removed specific distance ranges from rule text. · P1 engine table reference corrected from 'above' to 'below'; ETC/FBW/DBW throttle wording clarified on sensor and fail-safe requirements. · SM allows factory Mazda ECU and injector harnesses (P/N 0000-10-020E-99, 0000-10-080D-99) on 1999–2000 model year cars, unmodified. · SM electrical rules reorganized and clarified; alternator now externally regulated only by OEM ECU or master kill switch; harness repair by splicing permitted. · SM tire tread protrusion language removed from GCR 9.1.7.C.5. · P1 removes TIR inlet restrictor option; deletes requirement for single turbo/supercharger unit with single restrictor. · P1 CN-spec Honda K20A-FD2 clarified: stock OEM parts required, no machining allowed. · P1 engine rules correct grammar and remove head designs from specification table.showhide
  • FV Allowed Modifications E&O #27398wordingwordingFV exhaust exit opening repositioned: minimum one inch, maximum four inches behind rear body.
  • FV E&O Wheels #27230tyres & wheelsaddedtyres & wheelsFV allows fifteen-inch steel wheels at 4J or 4.5J width, standard VW sedan or within track dimensions.
  • P1 E&O Transmissions #27098wordingwordingP1 traction control prohibited.
  • P1 E&O Transmissions #27005otheraddedP1 permits mechanical, solenoid, and air-shifters; prohibits electronic pre-selection and multi-wheel power.
  • P1 Move minimum height provision to #27031wordingwordingP1 minimum bodywork height rule moved and restated with new 115cm aerodynamic part height limit.
  • P1 Remove duplicative fender louver provision #27033wordingwordingP1 consolidates fender louver rules into one section; removes duplicate allowance for louvers and clarifies brake and engine air ducts are permitted.
  • FV Exhaust termination rule E&O #26702wordingwordingFV exhaust outlet opening max distance from body rear increased from 3 to 4 inches.
  • P1 Missing word E&O #26919wordingwordingP1 anti-intrusion panels now allowed anywhere on chassis sides instead of specified locations.
  • P1 E&O correction to GCR 9.1.8.C.C. #26927wordingwordingP1 bodywork wording clarified: comfort and safety for driver and passenger or driver only.
  • FV E&O Dimensions #26674suspension & brakessuspension & brakesFV front track maximum 52.500 inches; rear track 49.125–50.750 inches; spacers now allowed.
  • P1 Clean up reference to engine table #26648wordingwordingP1 Engine Table reference cleaned up; no performance change.
  • P1 Remove redundant spec line #26692cars addedremovedcars addedP1 Mazda Renesis Rotary engine spec line removed from Engine Table.
  • FV Request to clarify Disc Brake rules bearing retainer & weights #26262weightslowerweightFV disc brake assembly minimum weight clarified to 16.5 lbs total; caliper minimum weight requirement of 1.65 lbs removed.
  • P1 Clean Up Engine Table Language #26590wordingwordingP1 Staudacher and Honda K20A-FD2 engine table wording clarified; no performance change.
  • P1 Move single-seat closed cockpit provision to #26376wordingwordingP1 closed cockpit single-seat cars remain prohibited; rule moved from subsection J.5 to B.4.
  • SM Request to allow aftermarket fuel filters. #26370otheraddedSM fuel pump and filter now permitted as Mazda or OEM equivalent part.
  • FF Request for Oversize Honda Fit Pistons #25810enginefasterengineFF Honda Fit cylinder honing increased to 73.315mm and oversize pistons PN 13020-RB7-Z00 now permitted with matching ring packs.
  • FF Heat Shield - Fit Intake #26102aeroaddedaeroFF intake manifold thermal wrap now permitted if easily removable for inspection; no coating allowed.
  • FF Request catch cans/tanks clarification #26158wordingwordingFF clarifies coolant and oil catch tank capacity requirements: coolant minimum one U.S. pint, oil minimum one U.S. quart per system.
  • FV FV Intake Manifold Clarification #26008wordingwordingFV intake manifold horizontal tube measurement location clarified; removed specific distance ranges from rule text.
  • P1 Correct errors in GCR section 9.1.8.C.J #26144wordingwordingP1 engine table reference corrected from 'above' to 'below'; ETC/FBW/DBW throttle wording clarified on sensor and fail-safe requirements.
  • SM Request 99-00 replacement Wire harnesses #25602otheraddedSM allows factory Mazda ECU and injector harnesses (P/N 0000-10-020E-99, 0000-10-080D-99) on 1999–2000 model year cars, unmodified.
  • SM Organize and Clarify 9.1.7.C.1.o. #25913wordingwordingSM electrical rules reorganized and clarified; alternator now externally regulated only by OEM ECU or master kill switch; harness repair by splicing permitted.
  • SM Strike Tire Tread Language #26123wordingremovedSM tire tread protrusion language removed from GCR 9.1.7.C.5.
  • P1 Remove redundant inlet restrictor provisions #25877wordingwordingP1 removes TIR inlet restrictor option; deletes requirement for single turbo/supercharger unit with single restrictor.
  • P1 Clarify Honda K20A-FD2 parts requirement #25949wordingwordingP1 CN-spec Honda K20A-FD2 clarified: stock OEM parts required, no machining allowed.
  • P1 Correct GCR section 9.1.8.C.J errors #25966wordingwordingP1 engine rules correct grammar and remove head designs from specification table.
Sonoma Raceway Runoffs 20182018-10-101:41.612Jonathon Kotyk · fastest of 22 · top 5 within 1.7s1:42.049Jonathon Kotyk · fastest of 22 · top 5 within 1.3s115.7Denny Renfrow1:52.637Skip Streets · fastest of 29 · top 5 within 1.6s1:53.639Alex Scaler · fastest of 28 · top 5 within 0.4s106.3Skip Streets+11.590squal +11.025s111.4%qual 110.9%1:54.355Ken Sutherland · fastest of 48 · top 5 within 0.7s1:55.278Michael Carter · fastest of 48 · top 5 within 0.3s102.2Danny Steyn+13.229squal +12.743s113.0%qual 112.5%1:27.714Todd Slusher · fastest of 19 · top 5 within 2.1s1:28.786Perry Richardson · fastest of 19 · top 5 within 0.9s144.0Johnnie Crean-13.263squal -13.898s87.0%qual 86.3%
No rule changes on record between these events
Indianapolis Motor Speedway Runoffs 20172017-09-251:44.601Zach Holden · fastest of 36 · top 5 within 1.2s1:44.524Jonathon Kotyk · fastest of 36 · top 5 within 0.5s1:55.759Michael Varacins · fastest of 39 · top 5 within 1.0s1:55.923Michael Varacins · fastest of 32 · top 5 within 1.3s+11.399squal +11.158s110.9%qual 110.7%1:58.306Chris Haldeman · fastest of 86 · top 5 within 0.5s1:59.100Michael Gagliardo · fastest of 83 · top 5 within 0.6s+14.576squal +13.705s113.9%qual 113.1%1:30.794Jim Devenport · fastest of 19 · top 5 within 2.8s1:31.499Jim Devenport · fastest of 16 · top 5 within 2.2s-13.025squal -13.807s87.5%qual 86.8%
No rule changes on record between these events
Mid-Ohio Sports Car Course Runoffs 20162016-09-191:29.213Neil Verhagen · fastest of 14 · top 5 within 2.1s1:30.133Neil Verhagen · fastest of 14 · top 5 within 1.4s1:37.942Alex Scaler · fastest of 41 · top 5 within 0.3s1:38.066Flinn Lazier · fastest of 38 · top 5 within 0.7s+7.933squal +8.729s108.8%qual 109.8%1:40.514Justin Hille · fastest of 45 · top 5 within 0.3s1:40.764Michael Carter · fastest of 44 · top 5 within 0.3s+10.631squal +11.301s111.8%qual 112.7%1:17.308James Devenport · fastest of 14 · top 5 within 2.7s1:19.407Gianpaolo Ciancimino · fastest of 13 · top 5 within 1.8s-10.726squal -11.905s88.1%qual 86.7%
No rule changes on record between these events
Daytona International Speedway Runoffs 20152015-09-212:02.489Tim Kautz · fastest of 25 · top 5 within 1.1s2:03.383Rick Payne · fastest of 22 · top 5 within 0.8s2:21.167Roger Siebenaler · fastest of 31 · top 5 within 0.8s2:21.142Andrew Whitston · fastest of 30 · top 5 within 1.1s+17.759squal +18.678s114.4%qual 115.2%2:18.661Andrew Carbonell · fastest of 62 · top 5 within 0.6s2:24.067Todd Lamb · fastest of 59 · top 5 within 0.8s+20.684squal +16.172s116.8%qual 113.2%1:49.219Jim Downing · fastest of 9 · top 5 within 2.2s1:49.792Gianpaolo Ciancimino · fastest of 10 · top 5 within 1.7s-13.591squal -13.270s89.0%qual 89.2%

By track

TrackEvents Typical % of FF Best Latest 
Road America4100.0%100.0%Runoffs 2020100.0%Runoffs 2026
Virginia International Raceway3100.0%100.0%Runoffs 2019100.0%Runoffs 2023
Indianapolis Motor Speedway2100.0%100.0%Runoffs 2017100.0%Runoffs 2021
Daytona International Speedway1100.0%100.0%Runoffs 2015100.0%Runoffs 2015
Mid-Ohio Sports Car Course1100.0%100.0%Runoffs 2016100.0%Runoffs 2016
Sonoma Raceway1100.0%100.0%Runoffs 2018100.0%Runoffs 2018
About this data
Every event the class ran, at any track, oldest to newest on the chart and newest first in the table. Each point is the class's best lap as a share of FF's best on the same day: the weather and the day cancel out, so one figure compares across years where lap times cannot; a class that suits one track more than another still reads differently there. It still moves when the yardstick's own balance changes or its field thins, and an event the yardstick did not run has no point. A best from fewer than three cars is greyed. The rule changes that took effect between two events are folded between their rows.