Lap times across years say as much about the weather as the class. % of FE2 is each class's best lap as a share of FE2's on the same day, so the conditions drop out: 100% is level, less is quicker, and a move in it is the class getting faster or slower against the field.
Quickest here:FE2 1:35.040 Flinn Lazier, Runoffs 2018 qualifying · STU 1:19.234 Franklin Church, Runoffs 2018 qualifying · AS 1:30.651 Tom Sloe, Runoffs 2016 qualifying · P2 1:20.188 Jeff Shafer, Runoffs 2016 qualifying
FE2STUASP2solid race · dashed qualifying · slower is lower
FE2STUASP2solid race · dashed qualifying · each class's best lap as a share of FE2's at the same event (the reference class, changeable above); 100% is level, less is quicker, so up the chart is quicker
2:12.326Franklin Futrelle · fastest of 8 · top 5 within 1.9s-0.149s (-0.11%)
2:11.881Franklin Futrelle · fastest of 8 · top 5 within 1.6s-1.458s (-1.09%)
143.5Steve Whitston-5.5 mph (-3.7%)
2:24.912Richard Astacio · fastest of 17 · top 5 within 2.6s+1.829s (+1.28%)
2:26.416Richard Astacio · fastest of 16 · top 5 within 1.5s+1.919s (+1.33%)
145.1Hugh Stewart+0.8 mph (+0.5%)
+14.535squal +12.586s
111.0%qual 109.5%
2:26.911Andrew McDermid · fastest of 8 · top 5 within 3.4s+0.119s (+0.08%)
2:28.471Andrew McDermid · fastest of 8 · top 5 within 2.4s-0.761s (-0.51%)
151.0Andrew McDermid-0.6 mph (-0.4%)
+16.590squal +14.585s
112.6%qual 111.0%
2:10.606Greg Gyann · fastest of 11 · top 5 within 5.3s+3.201s (+2.51%)
2:09.441Mike Reupert · fastest of 11 · top 5 within 4.2s+1.119s (+0.87%)
155.0Matt Strand+2.4 mph (+1.6%)
-2.440squal -1.720s
98.1%qual 98.7%
29 rule changes (FE2: 1, STU: 15, AS: 13)7 cars added · 5 weight · 3 induction · 3 tyres & wheels · 2 engine · 1 suspension & brakes · 6 wording · 2 other · AS Camaro 16+ Spec Line: 1LE front splitter kit permitted, belt tensioner and motor mount parts allowed, spark plug position defined. · AS class adds Pirelli P Zero Trofeo Track as permitted tyre option for competition. · GT3U wheel and tyre options clarified: 15x7 with 225 section at +275 lbs; 15x9 with 245 section at +275 lbs plus 1.5%; 16–18x9 with 245 section at +275 lbs plus 3.0%. · AS class rear trailing arms no longer required to maintain stock length, only to locate rear axle. · AS Ford Mustang GT 4.6L 4-valve regains allowance, minimum weight 3200 lbs. · AS Ford Mustang Coupe GT 05-14 Gen3 Coyote minimum weight increases from 3100 to 3400 lbs. · STU cars at or under 2,825 lbs minimum weight limited to 8-inch wheels; over 2,825 lbs limited to 9-inch wheels. · STU GT3U minimum weight increases from GT3 race weight plus 225 to plus 275 pounds; 2.0L unrestricted engines add 75 lbs. · AS GM LM7 5.3L must use full prep Holley carburetor as described in 9.1.6.D.c.1, not specifically 4776. · STU adds BMW M50B20TU engine, 1991 cc, minimum weight per chart, must meet all STU engine regulations. · STL, STU weight calculation procedure clarified: positive percentages added first, negative subtracted second, then fixed weights applied. · STU Honda K20C1 Turbo I4 turbo restrictor increases from 35mm to 36mm TIR. · STU GT86 Cup car must meet 2022 Toyota GR Cup rules, tires maximum 245 section width. · AS EFI engine build sheets add dry sump, header, camshaft, and timing chain tensioner options for LS, LT1, Ford, and Mopar engines. · AS LT1 Camaro engine build sheet added with full specs; LT1 weight 3200 lbs, GTO tire to 275, Mustang weight to 3525 lbs, oil catch tanks now required. · STU Mazda Renesis Street Port added to Table B with 2450 lbs minimum weight and 70mm throttle body options. · STU eliminates 33 and 34 mm inlet restrictor options, removing minimum weights of 2380 and 2525 lbs. · AS Spec Lines reorganized for 2026; detailed chassis, engine, weight, wheelbase, tire and brake specifications moved to main rules and engine build sheets. · STU Mazda MZR engines may now use Fab 9 Elite NC MX5 Performance Intake manifold as alternative option. · AS GM LM7 5.3L gains Edelbrock 71187 intake manifold, MSD 6014 ignition box, Holly 4776 carb option under full prep spec line. · AS Ford Mustang and Mercury Capri with Restricted Prep engines get 61 mm restrictor, down from 64 mm. · STU Mazda MZR (LF, L3, L5) Turbo added; Goodwin intake removed, Jack Spania Racing 70 mm intake and Fab9 Tuning bottom-mount turbo kit approved. · AS Ford Mustang GT 94-04 Restricted Prep Engine now permits Ford Motorsport M-6250-F303 camshaft. · STU 36mm restrictor revised to 2830 cc, 37mm to 2980 cc. · STU removes 275 tire option and 2% weight adder for cars over 3150 lbs; maximum section width now 245. · STU Honda K20 and K24 engines lose 2% weight penalty; minimum weight now per chart only. · AS Cadillac CTS-V 04-07 Restricted Prep minimum weight drops to 3400 lbs. · STU Honda K24 engine swap weight increases by 2 percent, effective November 1, 2025. · FE and FE2 Enterprise bubble tail part WM138014 now allowed; FE2 must use this configuration only.showhide
AS 2016+ Camaro Spec Line Full Prep #39646otheraddedAS Camaro 16+ Spec Line: 1LE front splitter kit permitted, belt tensioner and motor mount parts allowed, spark plug position defined.
AS Consideration of Pirelli P Zero Trofeo Track for AS Competition #40495tyres & wheelsadded · tyres & wheelsAS class adds Pirelli P Zero Trofeo Track as permitted tyre option for competition.
STU Wheel and tire requirements for GT3U #40679wordingwordingGT3U wheel and tyre options clarified: 15x7 with 225 section at +275 lbs; 15x9 with 245 section at +275 lbs plus 1.5%; 16–18x9 with 245 section at +275 lbs plus 3.0%.
AS Change in 9.1.6.D.4.d.5 in Suspension Mounting Points #40094suspension & brakesfaster · suspension & brakesAS class rear trailing arms no longer required to maintain stock length, only to locate rear axle.
AS Re-Add 4.6L 4v 96-04 Mustang Cobra #40239cars addedaddedAS Ford Mustang GT 4.6L 4-valve regains allowance, minimum weight 3200 lbs.
AS Errors and Omissions #40532weightslower · weightAS Ford Mustang Coupe GT 05-14 Gen3 Coyote minimum weight increases from 3100 to 3400 lbs.
STU 9” Wheels #40433tyres & wheelsslower · tyres & wheelsSTU cars at or under 2,825 lbs minimum weight limited to 8-inch wheels; over 2,825 lbs limited to 9-inch wheels.
STU Weight adjustment to former GT3U cars #40474weightslower · weightSTU GT3U minimum weight increases from GT3 race weight plus 225 to plus 275 pounds; 2.0L unrestricted engines add 75 lbs.
AS Clarification for LM7 Holley Carburetor #40167wordingwordingAS GM LM7 5.3L must use full prep Holley carburetor as described in 9.1.6.D.c.1, not specifically 4776.
STU Request to allow BMW M50B20TU engine in STU #40202cars addedaddedSTU adds BMW M50B20TU engine, 1991 cc, minimum weight per chart, must meet all STU engine regulations.
STU Calculating Weight #40224wordingwordingSTL, STU weight calculation procedure clarified: positive percentages added first, negative subtracted second, then fixed weights applied.
STU Turbo Restrictor Size Increase Request #40008inductionfaster · inductionSTU Honda K20C1 Turbo I4 turbo restrictor increases from 35mm to 36mm TIR.
STU GT86 Cups Car in STU #40028wordingwordingSTU GT86 Cup car must meet 2022 Toyota GR Cup rules, tires maximum 245 section width.
AS Header Information Update for EFI Engine Build Sheets #39886engineadded · engineAS EFI engine build sheets add dry sump, header, camshaft, and timing chain tensioner options for LS, LT1, Ford, and Mopar engines.
AS Errors and Omissions #39933otherfasterAS LT1 Camaro engine build sheet added with full specs; LT1 weight 3200 lbs, GTO tire to 275, Mustang weight to 3525 lbs, oil catch tanks now required.
STU Mazda Rx-8 Renesis - Streetported Variant & Added Weight #39785cars addedaddedSTU Mazda Renesis Street Port added to Table B with 2450 lbs minimum weight and 70mm throttle body options.
STU Eliminate 33 and 34 mm TIRs #39872inductionremoved · inductionSTU eliminates 33 and 34 mm inlet restrictor options, removing minimum weights of 2380 and 2525 lbs.
AS Re-Organization of AS Spec lines for 2026 #39887wordingwordingAS Spec Lines reorganized for 2026; detailed chassis, engine, weight, wheelbase, tire and brake specifications moved to main rules and engine build sheets.
STU Fab 9 Racing Intake Manifold in STU #39767cars addedaddedSTU Mazda MZR engines may now use Fab 9 Elite NC MX5 Performance Intake manifold as alternative option.
AS Edelbrock manifold (& timing kit) to Chevy LS Spec Lines Request #39055cars addedaddedAS GM LM7 5.3L gains Edelbrock 71187 intake manifold, MSD 6014 ignition box, Holly 4776 carb option under full prep spec line.
AS Restrictor Plate Change for Gen 2 Ford Coyote Engine #39501inductionslower · inductionAS Ford Mustang and Mercury Capri with Restricted Prep engines get 61 mm restrictor, down from 64 mm.
STU Request for Permission on Aftermarket Turbo Kit and Intake #39529cars addedaddedSTU Mazda MZR (LF, L3, L5) Turbo added; Goodwin intake removed, Jack Spania Racing 70 mm intake and Fab9 Tuning bottom-mount turbo kit approved.
AS 1994 Mustang Spec Line Request #39104engineadded · engineAS Ford Mustang GT 94-04 Restricted Prep Engine now permits Ford Motorsport M-6250-F303 camshaft.
STU Turbo Inlet Restrictor Table #38961wordingwordingSTU 36mm restrictor revised to 2830 cc, 37mm to 2980 cc.
STU 275 Tire Rule #38983tyres & wheelsslower · tyres & wheelsSTU removes 275 tire option and 2% weight adder for cars over 3150 lbs; maximum section width now 245.
STU STU Honda Engine weight penalty #39375weightfaster · weightSTU Honda K20 and K24 engines lose 2% weight penalty; minimum weight now per chart only.
2:12.475Franklin Futrelle · fastest of 11 · top 5 within 1.4s+0.969s (+0.74%)
2:13.339Franklin Futrelle · fastest of 10 · top 5 within 0.6s+0.591s (+0.45%)
149.0Steve Whitston+3.7 mph (+2.6%)
2:23.083Peter Cunningham · fastest of 16 · top 5 within 2.6s-3.144s (-2.15%)
2:24.497Chip Herr · fastest of 15 · top 5 within 3.8s-1.327s (-0.91%)
144.3Chip Herr-1.0 mph (-0.7%)
+11.158squal +10.608s
108.4%qual 108.0%
2:26.792Andrew McDermid · fastest of 11 · top 5 within 3.9s+0.214s (+0.15%)
2:29.232Gregory Eaton · fastest of 10 · top 5 within 4.0s+2.803s (+1.91%)
151.5Andrew McDermid+1.9 mph (+1.3%)
+15.893squal +14.317s
111.9%qual 110.8%
31 rule changes (FE2: 1, STU: 18, AS: 11, P2: 1)8 weight · 5 cars added · 5 engine · 3 tyres & wheels · 2 induction · 5 wording · 3 other · STU Lotus Elise SC and Exige SC weight reduced from 2450 to 2250 lbs. · STU-TCR gains GT3 TCR spec lines; 275 tyre option now costs 150 lb adder, up from 100 lb. · Lotus Evora GT4 minimum weight drops to 2700 lbs; Elise Cup R to 2250 lbs; Elise SC and Exige SC to 2450–2550 lbs. · AS Ford Mustang GT 5.0 2018- minimum weight reduced to 3525 lbs. · STU 2.8–3.2L N/A engines now permit 245 max tyre width; over 3150 lbs cars may run 275 with 2% weight penalty. · STU Mazda MZR intake manifold now allows Goodwin 61-2510 or Gato Performance 31972. · STU Honda JDM H23a added, 2259 cc, minimum weight per chart, must meet ST engine regulations. · AS Ford Mustang GT 05-14 Restricted Prep Engine gains additional gear ratio option: 3.66, 2.43, 1.69, 1.32, 1.00, .65. · AS Ford Mustang GT 5.0L 15-17 flat plate restrictor reduces from 67mm to 64mm. · AS LS1/LS6 intakes added for 5.3L truck engine: part numbers 12561269 and 88894095. · STU wheels capped at 18 inches diameter; under 2,850 lbs max 8 inches wide, over 2,850 lbs max 9 inches wide. · STU-GT3U minimum weight reduced from plus 250 to plus 225 pounds; wheel and tyre options clarified with weight adjustments. · AS Flotek head value seat cutting dimensions figure updated for consistency. · AS class notes cleaned: fuel cell and ECM specifications removed from multiple Camaro, Firebird, Challenger and Mustang variants. · FE2 allows pre-approved driver safety and comfort seat and control modifications for drivers with disabilities, per logbook. · AS removes 'Any ECM maybe used' note from five Cadillac and Chevrolet/Pontiac V8 Restricted Prep models. · STU BMW N54/N55 3.0 classified at chart plus 3% minimum weight; N54 twin turbo not allowed. · STU Mini Cooper S SC pulley diameter reduced to 2.185 inches. · STU Honda K20C1 Turbo I4 exempted from 3% direct injection weight adder. · STU GT3U minimum weight increases 150 pounds to 250 pounds. · AS Ford Mustang and Cobra Coyote engine restrictor increases to 80mm from 67mm or 64mm. · AS Mustang GT 05-14 Restricted loses 300 lbs engine; 15-17 and 2018+ models lose 61mm and 60mm restrictors respectively. · AS class: multiple American muscle cars gain additional allowed gear ratio options across model years and prep levels. · AS LS-engine cars gain ECU freedom: CTS-V, Camaro, Firebird (70–02) and Camaro SS may use any ECM. · STU Audi 1.8T Wagon removed; Porsche 944 1800cc weight to Chart, turbo inlet restrictor deleted. · STU-GT3 reclassified as STU-GT3U, effective 1 January 2026. · STU GT3 TCR may run 275-wide DOT tires with 100 lb weight penalty; A compound prohibited at 275. · P2 2000 cc Pinto engine car minimum weight set to 1335 lbs. · STL STU Mazda Miata alternate front hubs Mazda Motorsports Development Part #0000-04-5HUB-S1 approved. · STU BMW N54/N55 turbo inlet restrictors now required per GCR definition; twin turbo conversion to single turbo clarified. · STU Mini Cooper S SC: 1900 stock pulley spec to 2.565 diameter; 2100 now permits 2.285 diameter pulley.showhide
STU Lotus Weight Reduction E&O #38919weightfaster · weightSTU Lotus Elise SC and Exige SC weight reduced from 2450 to 2250 lbs.
STU STU-TCR Adjustments #38723weightslower · weightSTU-TCR gains GT3 TCR spec lines; 275 tyre option now costs 150 lb adder, up from 100 lb.
STU Lotus Weight Reduction #38772weight -50 lbsfaster · weightLotus Evora GT4 minimum weight drops to 2700 lbs; Elise Cup R to 2250 lbs; Elise SC and Exige SC to 2450–2550 lbs.
AS RE: Previous Letter 37695 Update #38245weight -75 lbsfaster · weightAS Ford Mustang GT 5.0 2018- minimum weight reduced to 3525 lbs.
STU 2.8-3.2L N/A Engine Allowances #38007tyres & wheelsfaster · tyres & wheelsSTU 2.8–3.2L N/A engines now permit 245 max tyre width; over 3150 lbs cars may run 275 with 2% weight penalty.
STU 2006-2015 Mazda Miata Intake Manifold #38422engineadded · engineSTU Mazda MZR intake manifold now allows Goodwin 61-2510 or Gato Performance 31972.
STU Requesting Approval of the JDM Honda h23a #38489cars addedaddedSTU Honda JDM H23a added, 2259 cc, minimum weight per chart, must meet ST engine regulations.
AS Errors and Omissions #38234otheraddedAS Ford Mustang GT 05-14 Restricted Prep Engine gains additional gear ratio option: 3.66, 2.43, 1.69, 1.32, 1.00, .65.
AS Errors and Omission #38055inductionslower · inductionAS Ford Mustang GT 5.0L 15-17 flat plate restrictor reduces from 67mm to 64mm.
AS Request to Add LS1/LS6 Intakes for 5.3L Truck Engine EnO #38197cars addedaddedAS LS1/LS6 intakes added for 5.3L truck engine: part numbers 12561269 and 88894095.
STU Wheel Size Inconsistency #38018tyres & wheelstyres & wheelsSTU wheels capped at 18 inches diameter; under 2,850 lbs max 8 inches wide, over 2,850 lbs max 9 inches wide.
STU Table C: STU-GT3U Clarification #38268weightfaster · weightSTU-GT3U minimum weight reduced from plus 250 to plus 225 pounds; wheel and tyre options clarified with weight adjustments.
AS Flotek Head Plunge Cut Inconsistencies #37502wordingwordingAS Flotek head value seat cutting dimensions figure updated for consistency.
AS Notes clean up #37693wordingwordingAS class notes cleaned: fuel cell and ECM specifications removed from multiple Camaro, Firebird, Challenger and Mustang variants.
FE2 Driver Safety & Comfort #37965otheraddedFE2 allows pre-approved driver safety and comfort seat and control modifications for drivers with disabilities, per logbook.
AS Race memo #37902wordingwordingAS removes 'Any ECM maybe used' note from five Cadillac and Chevrolet/Pontiac V8 Restricted Prep models.
STU BMW N54/N55 Engine Allowance Follow Up #37447cars addedaddedSTU BMW N54/N55 3.0 classified at chart plus 3% minimum weight; N54 twin turbo not allowed.
STU STU Mini Cooper pulley size clarification re: letter #36980 #37717inductionfaster · inductionSTU Mini Cooper S SC pulley diameter reduced to 2.185 inches.
STU Question About a Weight Modifier #37782weightfaster · weightSTU Honda K20C1 Turbo I4 exempted from 3% direct injection weight adder.
STU Increase Minimum Weight #37919weight +100 lbsslower · weightSTU GT3U minimum weight increases 150 pounds to 250 pounds.
AS Increase Coyote Engine Restrictor to 80mm #36177enginefaster · engineAS Ford Mustang and Cobra Coyote engine restrictor increases to 80mm from 67mm or 64mm.
AS Performance Pack for 2015+ Mustang #36867enginefaster · engineAS Mustang GT 05-14 Restricted loses 300 lbs engine; 15-17 and 2018+ models lose 61mm and 60mm restrictors respectively.
AS Gear Ratios #37131otheraddedAS class: multiple American muscle cars gain additional allowed gear ratio options across model years and prep levels.
AS ECU specs for LS engine #37208engineadded · engineAS LS-engine cars gain ECU freedom: CTS-V, Camaro, Firebird (70–02) and Camaro SS may use any ECM.
STU Audi 1.8t Wagon STU Table B #36685cars addedremoved · cars addedSTU Audi 1.8T Wagon removed; Porsche 944 1800cc weight to Chart, turbo inlet restrictor deleted.
STU Merger GT3 to STU #37486wordingunclearSTU-GT3 reclassified as STU-GT3U, effective 1 January 2026.
STU GT3 TCR Tire allowance #37494tyres & wheelsadded · tyres & wheelsSTU GT3 TCR may run 275-wide DOT tires with 100 lb weight penalty; A compound prohibited at 275.
P2 2000 cc Pinto Engine Car Weight #37187weightslower · weightP2 2000 cc Pinto engine car minimum weight set to 1335 lbs.
STU Request to Remove Miata Hubs from General category #37138cars addedaddedSTL STU Mazda Miata alternate front hubs Mazda Motorsports Development Part #0000-04-5HUB-S1 approved.
STU BMW N54/N55 Engine Allowance #37146wordingwordingSTU BMW N54/N55 turbo inlet restrictors now required per GCR definition; twin turbo conversion to single turbo clarified.
STU R53 15% Pulley Request #36980enginefaster · engineSTU Mini Cooper S SC: 1900 stock pulley spec to 2.565 diameter; 2100 now permits 2.285 diameter pulley.
2:11.506Porter Aiken · fastest of 18 · top 5 within 0.5s-1.300s (-0.98%)
2:12.748Porter Aiken · fastest of 17 · top 5 within 2.0s-0.523s (-0.39%)
145.3Porter Aiken+1.9 mph (+1.3%)
2:26.227Thomas Noble · fastest of 18 · top 5 within 2.3s-1.656s (-1.12%)
2:25.824Thomas Noble · fastest of 17 · top 5 within 2.4s-2.586s (-1.74%)
145.3Thomas Noble+1.1 mph (+0.8%)
+13.076squal +14.721s
109.9%qual 111.2%
2:26.578Gregory Eaton · fastest of 18 · top 5 within 2.6s-0.467s (-0.32%)
2:26.429Gregory Eaton · fastest of 18 · top 5 within 2.5s-1.239s (-0.84%)
149.6Gregory Eaton+0.4 mph (+0.3%)
+13.681squal +15.072s
110.3%qual 111.5%
2:07.405Bart Wolf · fastest of 14 · top 5 within 3.0s-1.109s (-0.86%)
2:08.322Bart Wolf · fastest of 13 · top 5 within 0.6s-1.471s (-1.13%)
152.5Lucian Pancea-0.6 mph (-0.4%)
-4.426squal -4.101s
96.7%qual 96.9%
20 rule changes (STU: 4, AS: 11, P2: 5)5 cars added · 2 aero · 2 engine · 1 induction · 1 tyres & wheels · 4 wording · 5 other · AS Mustang GT 05-14 Restricted Prep and 2018- gain alternate transmission ratio options. · STU RWD turbo cars no longer required to reduce inlet restrictor by 1 mm from table minimum. · AS adds 2018-23 Ford Mustang GT 5.0L at 3600 lbs, 275 tire, 60mm restrictor, optional Brembo front brakes. · AS Chevrolet Camaro 1LE (2016-) added with 3600 lbs minimum weight, 275 tires, 60mm restrictor, 345/338mm brakes. · AS Chevrolet/Pontiac Camaro & Firebird 82–92 5.7L LS1 classified: 3200 lbs, 13.1×1.27 disc brakes, 17 in max wheel, 65 mm restrictor, SLP intake lid permitted. · AS Chevrolet Camaro, Firebird, and Ford Mustang now permit Flo Tek cylinder heads in multiple generations. · P2 Spec Line E engine notes clarify oil system, ECU, and exhaust remain unrestricted; wording only. · P2 FIA Group CN notes clarify V de V European Proto Endurance Challenge bodywork, rear diffuser, wing, wheels, assisted shifting allowed; regulations link provided. · AS Camaro, Firebird 93-02 and GTO 04-06 add approved LS1 connecting rod part numbers to Notes. · AS Cadillac CTS-V, Chevy Camaro SS V8, Dodge Challenger, Ford Mustang GT 5.0L, Pontiac GTO allowed 11" wheels until 3/1/25. · Chevrolet Camaro, Pontiac Firebird 70–81 Full Prep classified in AS at 3400–3600 lbs with 108.0 wheelbase, specific head castings, and suspension modifications permitted. · AS class adds fuel cell location notes to multiple Cadillac, Chevrolet, Dodge and Ford models: cells within 24 inches of standard tank. · Chevrolet Camaro 6th gen Full Prep added to AS class at 3400 lbs base or 3600 lbs with built engine. · AS class: Ford Mustang GT 05-14 Restricted prep added; Cadillac CTS-V 04-07 to 3450 lbs; Camaro/Firebird variants reconfigured with weight and notes changes; Dodge Challenger 08-20 restrictor 76mm to 80mm; Ford Mustang variants updated wei… · STU Mini Cooper S SC gains alternate LEAP OMICRON hood scoop part LEP-OMICRON3 as permitted option. · STU BMW S54 B32 OEM dry sump oiling system now permitted. · STL and STU now permit electric power steering pumps, OEM electric-assisted steering, or column-mounted electric steering assist systems. · P2 AMAC and related cars: clarified B.1 modified engine range to 2008 and older stock engines only, with 38mm restrictor and 1025 lbs minimum weight. · P2 Suzuki GSX-R1000 engine: 2007–2008 crankcase 11300-21860 may be replaced with 2016–2019 GSX-S1000 part 11301-04840. · P2 Table 1 engine date ranges clarified: Stock Engine replaced with specific marques Suzuki, Yamaha, Honda, BMW for 2009-newer and 2008-older rows.showhide
AS Mustang transmission ratios #36662otheraddedAS Mustang GT 05-14 Restricted Prep and 2018- gain alternate transmission ratio options.
STU RWD Turbo Disadvantage #36255inductionfaster · inductionSTU RWD turbo cars no longer required to reduce inlet restrictor by 1 mm from table minimum.
AS Request for Classification of 2018-2023 mustang In #35764cars addedaddedAS adds 2018-23 Ford Mustang GT 5.0L at 3600 lbs, 275 tire, 60mm restrictor, optional Brembo front brakes.
AS 6th gen Camaro limited prep #35733cars addedaddedAS Chevrolet Camaro 1LE (2016-) added with 3600 lbs minimum weight, 275 tires, 60mm restrictor, 345/338mm brakes.
AS Chevrolet/Pontiac Camaro & Firebird (82-92) 5.7L V8 LS1 Alum BLK #35825cars addedaddedAS Chevrolet/Pontiac Camaro & Firebird 82–92 5.7L LS1 classified: 3200 lbs, 13.1×1.27 disc brakes, 17 in max wheel, 65 mm restrictor, SLP intake lid permitted.
AS Full Prep Head #35891engineadded · engineAS Chevrolet Camaro, Firebird, and Ford Mustang now permit Flo Tek cylinder heads in multiple generations.
P2 CN Spec ECU #35835wordingwordingP2 Spec Line E engine notes clarify oil system, ECU, and exhaust remain unrestricted; wording only.
P2 E&O - Correct FIA Group CN spec line notes #35900wordingwordingP2 FIA Group CN notes clarify V de V European Proto Endurance Challenge bodywork, rear diffuser, wing, wheels, assisted shifting allowed; regulations link provided.
AS Restricted Prep Aftermarket Parts Request #35682otheraddedAS Camaro, Firebird 93-02 and GTO 04-06 add approved LS1 connecting rod part numbers to Notes.
AS Allowance of 11 #35824tyres & wheelsfaster · tyres & wheelsAS Cadillac CTS-V, Chevy Camaro SS V8, Dodge Challenger, Ford Mustang GT 5.0L, Pontiac GTO allowed 11" wheels until 3/1/25.
AS Request to Classify 1970-1981 Camaro and Firebird in AS #33659cars addedaddedChevrolet Camaro, Pontiac Firebird 70–81 Full Prep classified in AS at 3400–3600 lbs with 108.0 wheelbase, specific head castings, and suspension modifications permitted.
AS Fuel Cell 12 #34194otheraddedAS class adds fuel cell location notes to multiple Cadillac, Chevrolet, Dodge and Ford models: cells within 24 inches of standard tank.
AS Please Classify the 6th Gen Into AS. #35448cars addedaddedChevrolet Camaro 6th gen Full Prep added to AS class at 3400 lbs base or 3600 lbs with built engine.
AS spec lines #35713otherunclearAS class: Ford Mustang GT 05-14 Restricted prep added; Cadillac CTS-V 04-07 to 3450 lbs; Camaro/Firebird variants reconfigured with weight and notes changes; Dodge Challenger 08-20 restrictor 76mm to 80mm; Ford Mustang variants updated wei…
STU Letter #35397 addendum #35453aeroadded · aeroSTU Mini Cooper S SC gains alternate LEAP OMICRON hood scoop part LEP-OMICRON3 as permitted option.
STU S54 Drysump #35464otheraddedSTU BMW S54 B32 OEM dry sump oiling system now permitted.
STU ST Electric-Assisted Steering Systems #35066aeroadded · aeroSTL and STU now permit electric power steering pumps, OEM electric-assisted steering, or column-mounted electric steering assist systems.
P2 E&O - Clarify B.1 modified engine range in AMAC spec lines #35225wordingwordingP2 AMAC and related cars: clarified B.1 modified engine range to 2008 and older stock engines only, with 38mm restrictor and 1025 lbs minimum weight.
P2 Replacement Engine Crankcase for 07/08 Suzuki GSX-R1000 Engines #35340engineadded · engineP2 Suzuki GSX-R1000 engine: 2007–2008 crankcase 11300-21860 may be replaced with 2016–2019 GSX-S1000 part 11301-04840.
P2 Correct Table 1 for Engine Date Range Specifications #35182wordingwordingP2 Table 1 engine date ranges clarified: Stock Engine replaced with specific marques Suzuki, Yamaha, Honda, BMW for 2009-newer and 2008-older rows.
1:50.665Charles Russell Turner · fastest of 26 · top 5 within 2.3s-0.188s (-0.17%)
1:51.098Franklin Futrelle · fastest of 19 · top 5 within 1.4s-20.947s (-15.86%)
141.3Franklin Futrelle-0.6 mph (-0.4%)
2:00.389Johan Schwartz · fastest of 13 · top 5 within 2.3s-0.226s (-0.19%)
2:02.302Mark Liller · fastest of 14 · top 5 within 1.6s-30.055s (-19.73%)
144.0Mark Liller+0.1 mph (+0.1%)
+11.204squal +9.724s
110.1%qual 108.8%
2:03.082Daniel Richardson · fastest of 11 · top 5 within 2.2s+0.920s (+0.75%)
2:04.120Gregory Eaton · fastest of 9 · top 5 within 3.0s-0.458s (-0.37%)
154.6James Jost+3.7 mph (+2.5%)
+13.022squal +12.417s
111.7%qual 111.2%
1:48.590Greg Gyann · fastest of 12 · top 5 within 1.7s+1.024s (+0.95%)
1:48.829Lucian Pancea · fastest of 11 · top 5 within 0.9s-27.005s (-19.88%)
150.9Lucian Pancea-0.2 mph (-0.2%)
-2.269squal -2.075s
98.0%qual 98.1%
15 rule changes (STU: 3, AS: 4, P2: 8)3 engine · 2 cars added · 1 tyres & wheels · 1 weight · 7 wording · 1 other · AS crate motor part number specification clarified; both CT400 P/N-19370604 and 19370604 engine assemblies permitted for GM vehicles. · AS Ford Mustang GT 5.0L (15-17) Restricted maximum wheel diameter increases to 19.0 inches. · AS Dodge Challenger 5.7L/6.1L/6.4L V8 allows alternate front upper control arms; SPC-66045 spec part removed. · AS Dodge Challenger 5.7L/6.1L/6.4L V8 now allows alternate front brake calipers with adaptor brackets for component compatibility. · STU adds 2022 Toyota GR Cup and GR86 Cup, both 2387cc, 2700 lbs, 18-inch wheels, 245/620R18 slicks. · P2 minimum side body height must equal front axle centerline height, viewed from side. · P2 closed cockpit single seat cars now prohibited unless Table 1 spec line permits. · P2 engine table spec line B.1 redundant effective date language removed and table updated. · P2 motorcycle restrictor reduced 35mm to 34mm for 2011+ Kawasaki; minimum weights increased to 1100 lbs for 2009+ engines; cockpit length corrected to 23.622 inches. · STU Mazda BP5A now classified at 1839 cc displacement, 2510 lbs minimum weight, alternate intake manifold permitted. · STU minimum weights adjusted: 2450 cc to 2595 lbs, 2600 cc to 2710 lbs. · Sebeco NP01-EVO and Elan NP01 added to P2 with Mazda 2.0L MZR, no restrictor required, 1600 lb minimum weight. · P2 Radical SR3/SR4, Cup, Club Sport, Pro-Sport, PR6: assisted shifting clarified from A-assisted to Aassisted; Cup engine restrictor changed from Unrestricted to Not required. · P2 chassis now allows composite materials partially installed; anti-intrusion panels attachment simplified; Stohr and converted models clarified.showhide
AS Crate Motor Part Numbers #32944wordingwordingAS crate motor part number specification clarified; both CT400 P/N-19370604 and 19370604 engine assemblies permitted for GM vehicles.
AS Request wheel size change #33007tyres & wheelsfaster · tyres & wheelsAS Ford Mustang GT 5.0L (15-17) Restricted maximum wheel diameter increases to 19.0 inches.
AS Alternative Upper Front Control Arms for Dodge Challenger #33352wordingwordingAS Dodge Challenger 5.7L/6.1L/6.4L V8 allows alternate front upper control arms; SPC-66045 spec part removed.
AS Front Brake Caliper Adapters for Dodge Challenger #33353otherotherAS Dodge Challenger 5.7L/6.1L/6.4L V8 now allows alternate front brake calipers with adaptor brackets for component compatibility.
STU 2022 Toyota GR Cup for STU #34449cars addedaddedSTU adds 2022 Toyota GR Cup and GR86 Cup, both 2387cc, 2700 lbs, 18-inch wheels, 245/620R18 slicks.
P2 Clarify minimum side body height requirement #34143wordingwordingP2 minimum side body height must equal front axle centerline height, viewed from side.
P2 Clarify closed cockpit single seat car allowance #34144wordingwordingP2 closed cockpit single seat cars now prohibited unless Table 1 spec line permits.
P2 Remove redundant effective date language and update engine table #34012wordingwordingP2 engine table spec line B.1 redundant effective date language removed and table updated.
P2 E&O - Correct dimensional equivalents #34038enginefaster · engineP2 motorcycle restrictor reduced 35mm to 34mm for 2011+ Kawasaki; minimum weights increased to 1100 lbs for 2009+ engines; cockpit length corrected to 23.622 inches.
STU Alternate OEM Miata Intake Manifold #33827engineadded · engineSTU Mazda BP5A now classified at 1839 cc displacement, 2510 lbs minimum weight, alternate intake manifold permitted.
STU E&O STU NA Weight Chart. #33737weightfaster · weightSTU minimum weights adjusted: 2450 cc to 2595 lbs, 2600 cc to 2710 lbs.
P2 Request to Classify Sebeco NP01 #33378cars addedaddedSebeco NP01-EVO and Elan NP01 added to P2 with Mazda 2.0L MZR, no restrictor required, 1600 lb minimum weight.
P2 Radical spec line clarifications #33485wordingwordingP2 Radical SR3/SR4, Cup, Club Sport, Pro-Sport, PR6: assisted shifting clarified from A-assisted to Aassisted; Cup engine restrictor changed from Unrestricted to Not required.
P2 E&O original class intent #33519wordingwordingP2 chassis now allows composite materials partially installed; anti-intrusion panels attachment simplified; Stohr and converted models clarified.
1:50.853Charles Russell Turner · fastest of 25 · top 5 within 1.1s-0.209s (-0.19%)
2:12.045Jason Conzo · fastest of 22 · top 5 within 1.8s+19.891s (+17.74%)
141.9Eric Cruz-0.6 mph (-0.5%)
2:00.615Johan Schwartz · fastest of 21 · top 5 within 2.6s+0.667s (+0.56%)
2:32.357Mark Liller · fastest of 19 · top 5 within 4.3s+31.874s (+26.46%)
143.9Johan Schwartz+0.1 mph (+0.1%)
+20.312squal +9.762s
115.4%qual 108.8%
2:02.162Kurt Rezzetano · fastest of 13 · top 5 within 2.3s-0.776s (-0.63%)
2:04.578Gregory Eaton · fastest of 11 · top 5 within 2.9s+0.678s (+0.55%)
150.9James Jost-3.0 mph (-2.0%)
-7.467squal +11.309s
94.3%qual 110.2%
1:47.566Tim Day Jr · fastest of 12 · top 5 within 3.0s-1.545s (-1.42%)
2:15.834Greg Gyann · fastest of 12 · top 5 within 10.1s+25.576s (+23.20%)
151.1Robert Iversen+1.8 mph (+1.2%)
+3.789squal -3.287s
102.9%qual 97.0%
40 rule changes (STU: 21, AS: 9, P2: 10)9 weight · 5 cars added · 5 engine · 3 tyres & wheels · 2 aero · 14 wording · 2 other · AS adds Hoosier W2 wet tyre option alongside R7, R6, WET/H20. · AS Dodge Challenger 08-20 gains two transmission ratio options: 2.97–0.50 or 2.26–0.63. · STU Mazda 13B Turbo added as Chart Limited displacement, streetport only, alternative turbos only. · STU OEM louver vents no longer count against vent allowance or 200 square inch limit. · STU non-4-valve engines gain 9% base engine weight reduction allowance; 2400cc minimum weight drops 1 lb to 2595. · AS Cadillac CTS-V 6.0L V8 Restricted Prep removes 295 tire size 50 lb penalty. · STU normally-aspirated engines 2976cc–3200cc with single throttle body lose 10% base engine weight reduction allowance. · ST removes redundant language about engine balance shaft removal and alternate pulley installation. · P2 chassis construction clarified: full composite allowed; partial composite must roll without composite parts installed. · P2 classification wording cleaned up in GCR section 9.1.8.C and GCR contents. · STU cars that qualified for 9 inch wheels in 2021 may continue running them through 2022 only. · STU splitter definition clarified: must attach to lowest point of front, have no vertical deviations. · P2 Oldsmobile cam rules correct spelling from 'after market' to 'aftermarket' in two sections. · STU BMW E36 M3 (95-99) S52B32 minimum weight cut to 3110 lbs from 3200, displacement to 3152 cc. · STU BMW S50B32 Euro maximum displacement 3201 cc, minimum weight 3300 lbs, permits 0.040 overbore and 0.5 compression increase. · ST engine swap origin rule narrowed: North America changed to United States only for case-by-case approval. · STU Honda CRX 84-91 and Civic Del Sol 93-97 both ineligible for front-wheel-drive weight reductions. · STU wheel width rule clarified: under 2950 lbs uses max 8.0 inches, 2950 lbs and over uses max 9.0 inches. · STU single-throttle body cars get lower minimum weights: 2450cc to 2596 lbs, 2500cc to 2635 lbs, 2550cc to 2675 lbs. · P2 adds Beasley B2 at 1350 lbs with Mazda 12A, 40.5mm venturi, and up to 16.5in wing chord. · P2 wings: terminology change from 'cord' to 'chord', and 'only' removed from Bobsy and Jondal notes. · P2 Converted F5 cars renamed F500, must retain F500 suspension, minimum width 55 inches. · STU single throttle body weight reduction removed; minimum weights revised down to 2990 lbs at 3000cc from 3300 lbs. · STU Audi A4 1.8T minimum weight fixed to 3050 lbs, K04 turbo removed, VF30 with 35mm restrictor required; Porsche 944 1800 weight fixed to 3050 lbs, VW/Audi 1.8L engine removed, 35mm inlet restrictor required. · STL and STU Improved Touring vehicles must now conform to section 9.1.4 Tires & Wheels. · P2 motorcycle engines gain 5cc to 1505cc max, two-stroke gains 5cc to 1205cc max, automotive engines add 50 lbs minimum weight to 1350 lbs. · STU engines may delete balance shafts and plug openings; alternate pulleys or gears allowed only for timing belt or chain operation. · STU hood vents now allow louvers within 200 square inches. · SMG Long Tube Headers: Borla PN 17237 discontinued, approved alternatives American Racing MT3-05134300LSNC or Kooks PN 11312000. · AS Mercury Capri 79-86 removed as separate spec line, merged into Ford Mustang 79-93 spec line. · AS Spec Mustang SMG Restricted Prep removes 3.73 gear ratio and 355/300 brake disc sizes. · AS Camaro, Firebird, Mustang full prep engines: alternate GM and Ford Performance cylinder heads permitted regionally with Allstar restrictor ALL26180. · P2 Control Area definition clarified: rectangular zone from rear edge of front tires to front edge of rear tires, full car width. · STU adds Honda K23 with 2354 cc displacement and chart minimum weight, K24 block allowed with K23 internals and head. · STU Honda K23 relaxes internal engine requirement, now needs only K23 crankshaft. · STL/STU intake manifold and cylinder head porting clarified as free; intake and exhaust porting wording removed. · P2 specification line B.1 engine table entry amended; details of change not provided in excerpt. · P2 Control Area definition clarified: rear tire edge and front tire edge bounds, car's lower surface width, floor extensions and aerodynamic attachments included, vertical structures prohibited. · AS Chevrolet/Pontiac Camaro & Firebird 93-02 gains BMR AA004 or UMI 2310 adjustable front upper control arms. · AS Pontiac GTO 04-06 Restricted Prep minimum weight rises: LS1 to 3300 lbs, LS2 to 3350 lbs on 295 tires.showhide
AS Request to add Hoosier W2 #33031tyres & wheelsadded · tyres & wheelsAS adds Hoosier W2 wet tyre option alongside R7, R6, WET/H20.
AS correction of Dodge Challenger specification line #33151cars addedaddedAS Dodge Challenger 08-20 gains two transmission ratio options: 2.97–0.50 or 2.26–0.63.
STU Request Mazda 13 B turbo #32668cars addedaddedSTU Mazda 13B Turbo added as Chart Limited displacement, streetport only, alternative turbos only.
STU Hood Vents and Intercooler Scoops #32733aeroadded · aeroSTU OEM louver vents no longer count against vent allowance or 200 square inch limit.
STU Non 4 valve weight reduction removed #32808weightfaster · weightSTU non-4-valve engines gain 9% base engine weight reduction allowance; 2400cc minimum weight drops 1 lb to 2595.
STU Error in new minimum weight table when combined with other text #32711engineslower · engineSTU normally-aspirated engines 2976cc–3200cc with single throttle body lose 10% base engine weight reduction allowance.
STU Redundant Language in May GCR #32713wordingwordingST removes redundant language about engine balance shaft removal and alternate pulley installation.
P2 E&O Clarification of Chassis Construction Requirements #32469wordingwordingP2 chassis construction clarified: full composite allowed; partial composite must roll without composite parts installed.
P2 Clean up P2 wording #32525wordingwordingP2 classification wording cleaned up in GCR section 9.1.8.C and GCR contents.
STU Opposed to the Proposed STU Weight Chart #32381tyres & wheelsadded · tyres & wheelsSTU cars that qualified for 9 inch wheels in 2021 may continue running them through 2022 only.
STU Clarification request for GCR 9.1.4.D.3.a Splitter Definition #32414wordingwordingSTU splitter definition clarified: must attach to lowest point of front, have no vertical deviations.
P2 After Market to Aftermarket #32373wordingwordingP2 Oldsmobile cam rules correct spelling from 'after market' to 'aftermarket' in two sections.
STU Request Adjustment to Min Weight for STU BMW E36 M3 (95-99) #31535weight -90 lbsfaster · weightSTU BMW E36 M3 (95-99) S52B32 minimum weight cut to 3110 lbs from 3200, displacement to 3152 cc.
STU BMW E36 M3 Canadian (North American) S50B32 engine #31866engineadded · engineSTU BMW S50B32 Euro maximum displacement 3201 cc, minimum weight 3300 lbs, permits 0.040 overbore and 0.5 compression increase.
STU Engine Swap Origin Country #32209wordingwordingST engine swap origin rule narrowed: North America changed to United States only for case-by-case approval.
STU CRX/Civic Del Sol #32214weightslower · weightSTU Honda CRX 84-91 and Civic Del Sol 93-97 both ineligible for front-wheel-drive weight reductions.
STU Error correction #32383wordingwordingSTU wheel width rule clarified: under 2950 lbs uses max 8.0 inches, 2950 lbs and over uses max 9.0 inches.
STU Single TB Weight Modifiers Add to Chart #32393weightfaster · weightSTU single-throttle body cars get lower minimum weights: 2450cc to 2596 lbs, 2500cc to 2635 lbs, 2550cc to 2675 lbs.
P2 Add spec line for Beasley B2 #32147cars addedaddedP2 adds Beasley B2 at 1350 lbs with Mazda 12A, 40.5mm venturi, and up to 16.5in wing chord.
P2 E&O Table 1 spec line wing terminology #32148wordingwordingP2 wings: terminology change from 'cord' to 'chord', and 'only' removed from Bobsy and Jondal notes.
P2 E&O class name #32196wordingwordingP2 Converted F5 cars renamed F500, must retain F500 suspension, minimum width 55 inches.
STU Single TB Weight Modifiers #31449weightfaster · weightSTU single throttle body weight reduction removed; minimum weights revised down to 2990 lbs at 3000cc from 3300 lbs.
STU Request to Remove A4 1.8t from STU Spec Line Tables #31465weightslower · weightSTU Audi A4 1.8T minimum weight fixed to 3050 lbs, K04 turbo removed, VF30 with 35mm restrictor required; Porsche 944 1800 weight fixed to 3050 lbs, VW/Audi 1.8L engine removed, 35mm inlet restrictor required.
STU Improved Touring Tires #32063tyres & wheelstyres & wheelsSTL and STU Improved Touring vehicles must now conform to section 9.1.4 Tires & Wheels.
P2 E&O Engine section #31969weightslower · weightP2 motorcycle engines gain 5cc to 1505cc max, two-stroke gains 5cc to 1205cc max, automotive engines add 50 lbs minimum weight to 1350 lbs.
STU Request Allowance for Balance Shaft Delete in STU #31434enginefaster · engineSTU engines may delete balance shafts and plug openings; alternate pulleys or gears allowed only for timing belt or chain operation.
STU Request Louvers in hood vents #31916aeroadded · aeroSTU hood vents now allow louvers within 200 square inches.
AS Proposed Revisions to SCCA GCR 2021 Appendix M, Part 3 #30295wordingwordingSMG Long Tube Headers: Borla PN 17237 discontinued, approved alternatives American Racing MT3-05134300LSNC or Kooks PN 11312000.
AS specification line consolidation and correction #31846cars addedremoved · cars addedAS Mercury Capri 79-86 removed as separate spec line, merged into Ford Mustang 79-93 spec line.
AS correction of SMG specification line #31847wordingremovedAS Spec Mustang SMG Restricted Prep removes 3.73 gear ratio and 355/300 brake disc sizes.
AS Alternate cylinder heads for full prep engine builds - Evaluation #31851engineadded · engineAS Camaro, Firebird, Mustang full prep engines: alternate GM and Ford Performance cylinder heads permitted regionally with Allstar restrictor ALL26180.
P2 E&O letter #31539 – Control Area definition #31783wordingwordingP2 Control Area definition clarified: rectangular zone from rear edge of front tires to front edge of rear tires, full car width.
STU Request to Add Honda K23 Spec Line #30682cars addedaddedSTU adds Honda K23 with 2354 cc displacement and chart minimum weight, K24 block allowed with K23 internals and head.
STU RE: Aug FT letter 30682 #31060enginefaster · engineSTU Honda K23 relaxes internal engine requirement, now needs only K23 crankshaft.
STU Throttling Device Clarification #31323wordingwordingSTL/STU intake manifold and cylinder head porting clarified as free; intake and exhaust porting wording removed.
P2 BoP adjustment effective 1-1-22 #31538otherunclearP2 specification line B.1 engine table entry amended; details of change not provided in excerpt.
P2 E&O clarification of "Control Area" definition #31539wordingwordingP2 Control Area definition clarified: rear tire edge and front tire edge bounds, car's lower surface width, floor extensions and aerodynamic attachments included, vertical structures prohibited.
AS Request for adjustable Front Upper Control Arms on 4th Gen F-Body #30457otheraddedAS Chevrolet/Pontiac Camaro & Firebird 93-02 gains BMR AA004 or UMI 2310 adjustable front upper control arms.
AS Request Pontiac GTO tire size change #30881weightslower · weightAS Pontiac GTO 04-06 Restricted Prep minimum weight rises: LS1 to 3300 lbs, LS2 to 3350 lbs on 295 tires.
1:36.395Max Grau · fastest of 28 · top 5 within 0.7s
1:36.655Max Grau · fastest of 28 · top 5 within 0.7s
146.2Gray Fowler
1:47.078Joe Moser · fastest of 30 · top 5 within 2.0s-1.843s (-1.69%)
1:47.441Joe Moser · fastest of 28 · top 5 within 1.8s-1.946s (-1.78%)
146.9Kip VanSteenburg
+10.786squal +10.683s
111.2%qual 111.1%
1:50.427Drew Cattell · fastest of 31 · top 5 within 1.9s+5.207s (+4.95%)
1:50.606Gregory Eaton · fastest of 28 · top 5 within 1.7s-0.901s (-0.81%)
153.8James Jost
+13.951squal +14.032s
114.4%qual 114.6%
1:33.235Tim Day Jr · fastest of 16 · top 5 within 3.3s+1.409s (+1.53%)
1:35.322Tim Day Jr · fastest of 10 · top 5 within 4.8s+2.841s (+3.07%)
150.3Robert Iversen
-1.333squal -3.160s
98.6%qual 96.7%
34 rule changes (STU: 12, AS: 14, P2: 8)8 cars added · 5 engine · 4 weight · 1 aero · 1 suspension & brakes · 13 wording · 2 other · P2 CN Honda K20A-FD2 engine rebuild clarified: balancing, porting, polishing prohibited; valve jobs and honing must follow factory procedures. · P2 Converted F5 cars must retain F5 suspension and meet P2 non-spec requirements except minimum width is 55 inches. · P2 minimum body width clarified: cannot extend inward beyond vertical plane through tire centerlines. · STU fender flare wording clarified: flare of exterior contour may not change wheel opening size, location or shape from side view. · STU Mazda 12A Bridgeport weight reduced from 2550 lbs to 2350 lbs. · AS Cadillac CTS-V 6.0L LS6 removes 295-tire 50 lb penalty. · AS consolidates seven SN95 Mustang '94-'04 spec lines into three unified lines by model year and engine. · AS Camaro/Firebird LT1 and LS1 transmission changed to TUET1 6362; Mustang GT 4.6L/5spd to TUKT16901, loses 300 lbs. · AS Camaro & Firebird and Mustang GT gear ratio specifications restored with alternate sets permitted. · AS Camaro, Firebird, Mustang, and Capri all gain 50 lbs minimum weight across seven model year variants. · P2 tonneau covers now allowed to meet minimum dimensions; cockpit equipment attachment wording clarified. · P2 removes effective date 01/01/2021 from six car spec lines in Table 1. · P2 engine specs B.1, B.2, B.3 limited to maximum 4 valves per cylinder. · STU fender flare rules clarified: maximum 2 inches total, must cover tire contact patch from above, cannot alter body configuration or wheel opening geometry. · STU Honda S2000 now allows F20/F22 K24 crankshaft with chart weight for achieved displacement. · ST oil coolers and filters now explicitly listed as addable or substitutable parts in vents and breathers section. · AS Mustang 4.6L 5spd gains cold air intake freedom; 5.0L 6spd now requires 56mm flat plate restrictor. · AS CTS-V 5.7L LS6 and 6.0L LS2 may use Driveshaft Shop P/N GMCTSV2-C carbon fiber driveshaft. · AS Chevrolet Camaro SS V8 6.2L Restricted Prep model years extended from 10–13 to 10–15. · P2 adds new spec line for 2-cycle 3-cylinder engine up to 820cc with 10 front, 14–15 rear wheel width. · ST 90-05 Mazda Miata allowed alternate front wheel hub Mazda Motorsports Development Part #0000-04-5HUB-S1. · ST cars may now relocate ABS actuation hardware and wiring anywhere in the engine compartment. · STU Porsche PDK automatic transmission limited to 8 forward speeds; sequential DCT systems require 3.5% minimum weight increase. · STU Mazda 13B Street Port 2400 removes choke location rule, allows auto-type 2bbl with any dual-Y manifold. · STU driveshaft and half-shafts now explicitly permitted in steel or aluminum, removing OEM material requirement. · AS Ford Mustang GT 5.0L 15-17 Restricted added to Spec Line with 3600 lbs minimum weight, 55mm restrictor, 18×10 wheels, 295 tires. · AS underhood bracing on stock hoods, trunks, and rear decks may be modified or removed. · AS Cadillac CTS-V 04-07 with 295 tire drops to 3450 lbs; Camaro SS V8 10-13 and Challenger 08-20 specs removed. · AS Camaro & Firebird (93-02) and Mustang GT (05-14) specifications restored with weight minimums 3250–3500 and 3350–3600 lbs respectively. · STU Mazda 13B Spec and Bridge Port removed; Street Port added at 2400 lbs minimum weight. · AS Dodge Challenger gains 6.1L and 6.4L V8 options; 5.7L weight rises to 3500 lbs on 295 tyres, 3600 on 315 tyres; compression to 10.9:1 max. · AS Camaro & Firebird (93-02) and Ford Mustang Coupe GT (05-14) spec lines consolidated; Camaro/Firebird now allows both LT1 and LS1 engines; Mustang now allows both 4.6L 3-valve and 5.0L 4-valve engines with restrictor. · P2 motorcycle-engine cars: 2009+ stock 37mm restrictor, 2008- stock 35mm, modified 1075 lbs. Honda K20A 50mm restrictor. Various spec cars: restrictors increased or decreased 0.5–3mm. · ST aero devices and reference areas must include end plates, exclude fasteners under 1/2" protrusion.showhide
P2 P2 CN Engine Rebuild Clarification #31000wordingwordingP2 CN Honda K20A-FD2 engine rebuild clarified: balancing, porting, polishing prohibited; valve jobs and honing must follow factory procedures.
P2 F5 P2 Conversion #30856wordingwordingP2 Converted F5 cars must retain F5 suspension and meet P2 non-spec requirements except minimum width is 55 inches.
P2 Clarify minimum body width requirement #30859wordingwordingP2 minimum body width clarified: cannot extend inward beyond vertical plane through tire centerlines.
STU STU Fender flares #30696wordingwordingSTU fender flare wording clarified: flare of exterior contour may not change wheel opening size, location or shape from side view.
STU Request weight reduction for 12A bridgeport motor in Miata #30751weight -200 lbsfaster · weightSTU Mazda 12A Bridgeport weight reduced from 2550 lbs to 2350 lbs.
AS Request CTS-V Spec Line Error Correction #30242weightfaster · weightAS Cadillac CTS-V 6.0L LS6 removes 295-tire 50 lb penalty.
AS Request to consolidate SN95 Mustang '94-'04 Mustang spec lines #30428wordingwordingAS consolidates seven SN95 Mustang '94-'04 spec lines into three unified lines by model year and engine.
AS American Sedan Transmission Rule Change Request #30595enginefaster · engineAS Camaro/Firebird LT1 and LS1 transmission changed to TUET1 6362; Mustang GT 4.6L/5spd to TUKT16901, loses 300 lbs.
AS Correction to specifications inadvertently deleted #30691wordingwordingAS Camaro & Firebird and Mustang GT gear ratio specifications restored with alternate sets permitted.
AS weight adjustments #30700weight +50 lbsslower · weightAS Camaro, Firebird, Mustang, and Capri all gain 50 lbs minimum weight across seven model year variants.
P2 E&O tonneau cover provision in cockpit opening section #30459wordingwordingP2 tonneau covers now allowed to meet minimum dimensions; cockpit equipment attachment wording clarified.
P2 Remove effective dates in Table 1 #30468wordingwordingP2 removes effective date 01/01/2021 from six car spec lines in Table 1.
P2 E&O Maximum Valves Per Cylinder #30560engineengineP2 engine specs B.1, B.2, B.3 limited to maximum 4 valves per cylinder.
STU Request for Fender Flare Clarification #30375wordingwordingSTU fender flare rules clarified: maximum 2 inches total, must cover tire contact patch from above, cannot alter body configuration or wheel opening geometry.
STU Provision for Interchangeable Engine Components Already Allowed #30342engineadded · engineSTU Honda S2000 now allows F20/F22 K24 crankshaft with chart weight for achieved displacement.
STU ST Oil Coolers E&O Correction to 9.1.4.2.H #30388wordingwordingST oil coolers and filters now explicitly listed as addable or substitutable parts in vents and breathers section.
AS AS Mustang LP 4.6 3V Classification Transmission Request #29886enginefaster · engineAS Mustang 4.6L 5spd gains cold air intake freedom; 5.0L 6spd now requires 56mm flat plate restrictor.
AS Request CF driveshaft on CTS-V for durability improvement #30117otheraddedAS CTS-V 5.7L LS6 and 6.0L LS2 may use Driveshaft Shop P/N GMCTSV2-C carbon fiber driveshaft.
AS Adjustment to model years of 5th generation RP Camaro #30348cars addedaddedAS Chevrolet Camaro SS V8 6.2L Restricted Prep model years extended from 10–13 to 10–15.
P2 Add a new spec line for a 2-cycle, 3-cylinder engine up to 820cc #30272cars addedaddedP2 adds new spec line for 2-cycle 3-cylinder engine up to 820cc with 10 front, 14–15 rear wheel width.
STU Super Touring Alternate Miata Hubs #30345cars addedaddedST 90-05 Mazda Miata allowed alternate front wheel hub Mazda Motorsports Development Part #0000-04-5HUB-S1.
STU Brake Component Relocation #29990suspension & brakessuspension & brakesST cars may now relocate ABS actuation hardware and wiring anywhere in the engine compartment.
STU Porsche PDK #30081wordingwordingSTU Porsche PDK automatic transmission limited to 8 forward speeds; sequential DCT systems require 3.5% minimum weight increase.
STU Reference Letter #29333 Proposed STU 13B Spec Line Changes #30086wordingwordingSTU Mazda 13B Street Port 2400 removes choke location rule, allows auto-type 2bbl with any dual-Y manifold.
STU Drive Shaft Request #30087otherotherSTU driveshaft and half-shafts now explicitly permitted in steel or aluminum, removing OEM material requirement.
AS Request for 2015 -2017 Ford Mustang Spec Line #29514cars addedaddedAS Ford Mustang GT 5.0L 15-17 Restricted added to Spec Line with 3600 lbs minimum weight, 55mm restrictor, 18×10 wheels, 295 tires.
AS Request Trunk lid / Rear Hatch clarification #29591wordingwordingAS underhood bracing on stock hoods, trunks, and rear decks may be modified or removed.
AS Common Weight for CTS-V Tire #29759weightfaster · weightAS Cadillac CTS-V 04-07 with 295 tire drops to 3450 lbs; Camaro SS V8 10-13 and Challenger 08-20 specs removed.
AS Correction to specifications inadvertently deleted #30041cars addedaddedAS Camaro & Firebird (93-02) and Mustang GT (05-14) specifications restored with weight minimums 3250–3500 and 3350–3600 lbs respectively.
STU 13B Rules Adjustment #29333cars addedremoved · cars addedSTU Mazda 13B Spec and Bridge Port removed; Street Port added at 2400 lbs minimum weight.
AS Request Additional Engine Options for Dodge Challenger Spec Line #29543cars addedaddedAS Dodge Challenger gains 6.1L and 6.4L V8 options; 5.7L weight rises to 3500 lbs on 295 tyres, 3600 on 315 tyres; compression to 10.9:1 max.
AS Rule simplification spec line communization #29824cars addedcars addedAS Camaro & Firebird (93-02) and Ford Mustang Coupe GT (05-14) spec lines consolidated; Camaro/Firebird now allows both LT1 and LS1 engines; Mustang now allows both 4.6L 3-valve and 5.0L 4-valve engines with restrictor.
STU Request clarification on wing measurement #29640aeroaeroST aero devices and reference areas must include end plates, exclude fasteners under 1/2" protrusion.
2:12.806Scott Rettich · fastest of 25 · top 5 within 0.6s
2:13.271Owen McAllister · fastest of 23 · top 5 within 0.7s
143.4Owen McAllister
2:27.883David Fiorelli · fastest of 14 · top 5 within 4.1s
2:28.410Anthony Geraci · fastest of 14 · top 5 within 3.1s
144.2David Fiorelli
+15.139squal +15.077s
111.4%qual 111.4%
2:27.045Gregory Eaton · fastest of 18 · top 5 within 0.6s
2:27.668Gregory Eaton · fastest of 15 · top 5 within 1.5s
149.2Gregory Eaton
+14.397squal +14.239s
110.8%qual 110.7%
2:08.514Robert Iversen · fastest of 12 · top 5 within 3.0s
2:09.793Robert Iversen · fastest of 12 · top 5 within 3.9s
153.1Robert Iversen
-3.478squal -4.292s
97.4%qual 96.8%
41 rule changes (FE2: 2, STU: 17, AS: 16, P2: 6)8 engine · 5 cars added · 5 weight · 2 aero · 1 induction · 1 suspension & brakes · 15 wording · 4 other · FE2 oil cooler rule clarified: Setrab 50-625-7612 or any cooler with max core 13 inches wide by 6.5 inches high allowed. · P2 rear wing rules clarified: standard wing 6×12 inches, end plates 14-inch square; alternate 1-meter formula wing 110cm wide, 9×18 inches, end plates 14×18 inches. · STU fender flare rule reworded: now per-corner up to 2" total, 1% weight penalty applies to entire modification. · AS Dodge Challenger 5.7L V8 now requires iron block instead of aluminum, compression to 10.5:1 max, intake valve 12.7 mm, exhaust 12.3 mm, intake timing 188 degrees, exhaust timing 205 degrees. · AS Dodge Challenger 08-14 rear spoiler: 1GL20RXF replaced with 1GL20TZZAB; 82211606 still permitted. · STL and STU clarify weight adjustment calculation order: engine adjustments first, then chassis percentage additions, subtractions, and fixed pounds. · STL STU rear wing Gurney flap terminology clarified from wicker to Gurney flap in mounting and chord rules. · AS class pursuing specified list of eligible tires; list details unclear from text provided. · AS class tire eligibility list under development; no specifications changed yet. · AS Coyote Mustang restrictor plate under review for 2021; no change effective yet. · AS Restricted Prep 4.6 3V now permits conversion to 2 valve configuration. · AS Ford Mustang Coupe GT 4.6L 3V Restricted Prep now permits Ford Performance camshaft kit P/N M-6550-3V. · 2010-2014 Camaro remains classified in AS; no specification changes. · AS class cylinder head supplier discontinuation; replacement option pending for 2021 season. · AS Mustang, Capri, Camaro, and Firebird maximum brake rotor diameter increased from 12.2 to 13.1 inches. · unclear · STU request for alternate intake manifold denied; no change to rules. · GT3 and STU add Borg-Warner EFR6258 turbocharger to approved turbo lists. · STU large displacement turbo engines limited by GCR turbo list; no BoP change granted. · STU sequential shifters referred to Board of Directors for approval; no rule change effective. · Elan NP01 added to P2 Table 1 as Spec Line car with 2000cc displacement and 42mm restrictor. · STU Mazda 13B Bridge Port and Street Port added with 2550 lbs and 2250 lbs minimum weight respectively. · P2 Enterprises Sports Racer now permits 55mm flat plate intake restrictor Part # WM303013 as alternative to SIR. · P2 Enterprise Sports Racer 2.3L engine must use SIR or Flat Plate restrictor meeting peak horsepower, sized in whole or 0.5mm increments. · STU Honda S2000 gains HKS Supercharger kits 12001-AH006 and 12001-AH010 as allowed options. · STU Lotus Elise Cup R and SC Exige SC gain 100 lbs minimum weight to 2300, 2500. · STU Volkswagen GTI/GLI MK5 and Jetta Mk4 may now install turbo inlet restrictor in OEM housing, per TIR spec. · STU Honda K20C1 Turbo I4 restrictor reduces from 36mm to 35mm. · STU GM Ecotech LNF now permitted without turbo, with LE5 head and intake manifold, meeting STL specs. · STU Porsche 944 now permits VW/Audi 1.8L and 2.0L turbo engines as alternates to original. · P2 electronic throttle control wording clarified: ETC permitted if stock ECU throttle pedal activates original throttle shaft mechanism. · STU vehicles over 2951 lbs base weight may use 9 inch wide wheels, changed from 2950 lbs. · STU turbocharged engines now use base weight instead of minimum weight; DFI cars add 3% to base weight. · AS rear trailing arms may be replaced with tubular arms maintaining stock length and axle location purpose only. · AS Ford and GM full prep cars get increased weight reduction from 150 to 200 lbs. · 05-10 Ford Mustang Coupe GT 4.6L OHC classified AS with 3200 lbs minimum weight, HR cam permitted. · 10-15 Camaro Full Prep classified AS with 3400 lbs base weight, 3700 lbs over 313 CID, specific head castings and Edelbrock heads permitted. · P2 adds BMW to permitted motorcycle-based engines alongside Kawasaki, Suzuki, Yamaha, Honda. · FE minimum weight rises to 1270 lbs; FE2 minimum weight rises to 1270 lbs; new spring options added; tire warmers prohibited. · STU allows OEM electronic throttle bodies, manual conversion, cam changes, and manual-to-electronic conversion with same inner diameter.showhide
FE2 FE/FE2 Oil Cooler #29293wordingwordingFE2 oil cooler rule clarified: Setrab 50-625-7612 or any cooler with max core 13 inches wide by 6.5 inches high allowed.
P2 E&O clarification of P2 rear wing requirements #29205aeroaeroP2 rear wing rules clarified: standard wing 6×12 inches, end plates 14-inch square; alternate 1-meter formula wing 110cm wide, 9×18 inches, end plates 14×18 inches.
STU Request for Advanced Aero Rule Wording Clarification. #29124wordingwordingSTU fender flare rule reworded: now per-corner up to 2" total, 1% weight penalty applies to entire modification.
AS Dodge Challenger AS Spec Line Clarification #28698engineslower · engineAS Dodge Challenger 5.7L V8 now requires iron block instead of aluminum, compression to 10.5:1 max, intake valve 12.7 mm, exhaust 12.3 mm, intake timing 188 degrees, exhaust timing 205 degrees.
AS Dodge Challenger AS Spec Line Clarification #2 #28699aeroaeroAS Dodge Challenger 08-14 rear spoiler: 1GL20RXF replaced with 1GL20TZZAB; 82211606 still permitted.
STU Minimum Weight Determination #27695wordingwordingSTL and STU clarify weight adjustment calculation order: engine adjustments first, then chassis percentage additions, subtractions, and fixed pounds.
STU ST Gurney flap Wicker clarification #29012wordingwordingSTL STU rear wing Gurney flap terminology clarified from wicker to Gurney flap in mounting and chord rules.
AS Support for R-Type Specification Tires #27450wordingunclearAS class pursuing specified list of eligible tires; list details unclear from text provided.
AS Spec Tire Request #27519wordingunclearAS class tire eligibility list under development; no specifications changed yet.
AS Restrictor Plate Change for RP 2011+ Mustang with Coyote Engine #27675wordingunclearAS Coyote Mustang restrictor plate under review for 2021; no change effective yet.
AS 2005-2009 Restricted Prep 4.6 3V #27908engineadded · engineAS Restricted Prep 4.6 3V now permits conversion to 2 valve configuration.
AS Request for 2005-2009 Restricted Prep 4.6 3V Parts #27909engineadded · engineAS Ford Mustang Coupe GT 4.6L 3V Restricted Prep now permits Ford Performance camshaft kit P/N M-6550-3V.
AS Request for Full Preparation Classification for 2010-2014 Camaro #28030wordingunclear2010-2014 Camaro remains classified in AS; no specification changes.
AS Cylinder Heads #28696wordingunclearAS class cylinder head supplier discontinuation; replacement option pending for 2021 season.
AS Request for Max Rotor Diameter Change #28748otherfasterAS Mustang, Capri, Camaro, and Firebird maximum brake rotor diameter increased from 12.2 to 13.1 inches.
AS Request increase rotor diameter #28797wordingunclearunclear
STU Request for Alternate Intake Manifold #26514wordingunclearSTU request for alternate intake manifold denied; no change to rules.
STU Request for Addition to GT3 Approved Turbo List #27576cars addedaddedGT3 and STU add Borg-Warner EFR6258 turbocharger to approved turbo lists.
STU Request BoP for my Car #29004wordingunclearSTU large displacement turbo engines limited by GCR turbo list; no BoP change granted.
STU Sequential Shifters in STU #29031wordingunclearSTU sequential shifters referred to Board of Directors for approval; no rule change effective.
P2 Classify Elan NP01 in P2 Table 1 #28812cars addedaddedElan NP01 added to P2 Table 1 as Spec Line car with 2000cc displacement and 42mm restrictor.
STU Rotary Help #27833cars addedaddedSTU Mazda 13B Bridge Port and Street Port added with 2550 lbs and 2250 lbs minimum weight respectively.
AS weight adjustments for 2020 season #28785weight -50 lbs
P2 SCCA Enterprises ESR / P2 engine restrictor testing #28669otheraddedP2 Enterprises Sports Racer now permits 55mm flat plate intake restrictor Part # WM303013 as alternative to SIR.
P2 Add ESR inlet restrictor #27869inductionadded · inductionP2 Enterprise Sports Racer 2.3L engine must use SIR or Flat Plate restrictor meeting peak horsepower, sized in whole or 0.5mm increments.
STU Request to approve Honda S2000 HKS supercharger #27281otheraddedSTU Honda S2000 gains HKS Supercharger kits 12001-AH006 and 12001-AH010 as allowed options.
STU Request BoP on the Lotus #27637weight +100 lbsslower · weightSTU Lotus Elise Cup R and SC Exige SC gain 100 lbs minimum weight to 2300, 2500.
STU Turbo Inlet Restrictor On MK5 Volkswagen #27704otherslowerSTU Volkswagen GTI/GLI MK5 and Jetta Mk4 may now install turbo inlet restrictor in OEM housing, per TIR spec.
STU Honda K20C1 removal #27732engineslower · engineSTU Honda K20C1 Turbo I4 restrictor reduces from 36mm to 35mm.
STU Change GM LNF 2.0 Allowance to LSJ Engine for Viable STL 2.0 #27884engineadded · engineSTU GM Ecotech LNF now permitted without turbo, with LE5 head and intake manifold, meeting STL specs.
STU Alternate Engine for Porsche 944 #28259engineadded · engineSTU Porsche 944 now permits VW/Audi 1.8L and 2.0L turbo engines as alternates to original.
P2 Request for Fly by Wire Rule Wording Change #28247wordingwordingP2 electronic throttle control wording clarified: ETC permitted if stock ECU throttle pedal activates original throttle shaft mechanism.
STU Please Modify the STU Wheel Size Rule for Clarity #27694weightfaster · weightSTU vehicles over 2951 lbs base weight may use 9 inch wide wheels, changed from 2950 lbs.
STU Turbo Engine Cars Base Weight #28032wordingwordingSTU turbocharged engines now use base weight instead of minimum weight; DFI cars add 3% to base weight.
AS Rear Trailing Arms #28007suspension & brakesadded · suspension & brakesAS rear trailing arms may be replaced with tubular arms maintaining stock length and axle location purpose only.
AS Weight reduction for cars running iron heads #28010weightfaster · weightAS Ford and GM full prep cars get increased weight reduction from 150 to 200 lbs.
AS 05-10 Mustang with HR cam classification #28226cars addedadded05-10 Ford Mustang Coupe GT 4.6L OHC classified AS with 3200 lbs minimum weight, HR cam permitted.
AS 10-15 Camaro Full Prep classification #28227cars addedadded10-15 Camaro Full Prep classified AS with 3400 lbs base weight, 3700 lbs over 313 CID, specific head castings and Edelbrock heads permitted.
P2 Request for addition of BMW Engine in P2 Engine Table #27821engineadded · engineP2 adds BMW to permitted motorcycle-based engines alongside Kawasaki, Suzuki, Yamaha, Honda.
FE2 FE / FE2 Update Rules #27624weightslower · weightFE minimum weight rises to 1270 lbs; FE2 minimum weight rises to 1270 lbs; new spring options added; tire warmers prohibited.
STU Request for an electronic throttle body #27342engineadded · engineSTU allows OEM electronic throttle bodies, manual conversion, cam changes, and manual-to-electronic conversion with same inner diameter.
1:51.062Liam Snyder · fastest of 20 · top 5 within 1.3s
1:52.154Liam Snyder · fastest of 19 · top 5 within 0.7s
142.6Robert Vanman
1:59.948Kevin Boehm · fastest of 25 · top 5 within 3.5s
2:00.483Kevin Boehm · fastest of 25 · top 5 within 2.5s
143.8Kevin Boehm
+8.329squal +8.886s
107.4%qual 108.0%
2:02.938Gregory Eaton · fastest of 17 · top 5 within 0.8s
2:03.900James Jost · fastest of 16 · top 5 within 2.1s
153.9James Jost
+11.746squal +11.876s
110.5%qual 110.7%
1:49.111Robert Iversen · fastest of 14 · top 5 within 0.8s
1:50.258Greg Gyann · fastest of 13 · top 5 within 0.4s
149.4Robert Iversen
-1.896squal -1.951s
98.3%qual 98.2%
35 rule changes (STU: 22, AS: 4, P2: 9)8 cars added · 8 engine · 4 induction · 3 aero · 2 weight · 9 wording · 1 other · AS Spec Mustang (SMG) added as Restricted Prep class. · P2 Honda K20A-FD2 non-composite chassis intake restrictor note clarified; restrictor implementation date removed. · P2 motorcycle engines: Stock restrictor to 35mm, Modified to 34mm; weights up to 1025 and 1125 lbs respectively. B.5 restrictor to 33mm, weight to 1185 lbs. · STU wing assembly wording corrected: no part may be higher than roof height. · AS class ride height minimum clarified: five inches measured at rocker panel, excluding seams and stock effects. · P2 cars limited to power application on maximum two wheels. · STU Nissan SR20DET removes -2mm penalty from Table B. · STU allows alternate intake manifolds on case-by-case basis; stock throttle device and manifold otherwise required. · P2 Enterprise minimum weight increased to 1375 lbs.; peak horsepower of sealed ESR engine reduced per CRB specification. · AS Ford Mustang 79-93 non-Cobra drops 100 lbs to 3150; over 313 CID Cobra drops 100 lbs to 3450. · STU aftermarket side skirts now allowed if they meet 3-inch ride height, lack ducts except jacks or exhaust, don't exceed fascia width, stay below door bottom, and don't reinforce chassis. · STU wheel flare wording clarified: each fender may be flared to 2" with 1% weight penalty, maintaining OEM profile. · STL and STU ride height measurement clarified: lowest rocker panel point without driver, excluding pinch weld. · STU Mazda 13B Bridge Port now permits ELITE ROTARY SHOP FD V2.0 intake manifold; stock throttle body requirement removed. · STU Mazda MZR gains alternate Goodwin intake manifold option with stock or Acura throttle body. · STU alternate suspension components rule moved from section E to section D. · STU Honda/Acura B20 now permits B16 or B18 VTEC cylinder head and matching intake manifold. · STU flared fenders up to 2" with 1% weight penalty moved from base to Advanced Aero. · STU Honda Civic Si TCA 2017- requires 37mm TIR throttle as of June 1, 2019. · STU BMW S54B32 OEM classified separately from E46, displacement 3246 cc, minimum weight 3300 lbs, OEM engine mandatory. · P2 stock and modified engines get smaller restrictors (35.0mm, 34.0mm, 33.0mm) and heavier minimums (1025, 1125, 1185 lbs). · P2 Line A.1 restrictor reduced from 40mm to 38mm. · Honda Civic Si 2017- added to STU with 1500cc displacement, 2800 lbs minimum weight, OEM engine and bodywork, specific HPD parts allowed. · STU BMW E46 S54 OEM 3246cc added at 3300 lbs minimum; no Super Touring allowances, OEM intake and cams, 1mm overbore, compression +0.5 permitted. · STU Mazda 13B and 13B Bridge Port may use 13B RE or REW housings and intake with turbo removed. · STU Honda K24 may use intake part numbers 17100-RRB-A00 or 17100-PRB-A10. · STU Mazda 12A Bridge Port added, minimum weight 2550 lbs, Nikki or Auto-type carburettor with specified modifications. · STU World Challenge car weight rule deleted; no replacement specified. · STU AWD/RWD cars no longer must reduce restrictor 1 mm from table. · STU rear wing maximum 12" cord, 72 sq in end plates each, roof height max, body width limit. · AS adds Spec Mustang SMG classification with 107.1 wheelbase, 3.73 gears, 355mm front and 300mm rear brakes. · P2 Spec Line cars now allow 1345cc Hayabusa stock engines at 1050 lb minimum with 30mm restrictor. · P2 Group CN Honda K20A-FD2 55mm intake restrictor implementation delayed from 1 January to 3 March 2019. · P2 Honda K20A-FD2 Group CN must use stock intake manifold, 64mm throttle, 55mm restrictor at 1500 lbs minimum. · STU adds Honda K20C1 Turbo I4, 1996 cc, 3025 lbs minimum weight, 36mm TIR required.showhide
AS Request to add SMG to 9.1.6.B.1 AS Intent #27140cars addedaddedAS Spec Mustang (SMG) added as Restricted Prep class.
P2 Update Engine Table Line E notes #27414wordingwordingP2 Honda K20A-FD2 non-composite chassis intake restrictor note clarified; restrictor implementation date removed.
P2 Update P2 Engine Table spec lines to reflect 3/1/2019 #27254engineslower · engineP2 motorcycle engines: Stock restrictor to 35mm, Modified to 34mm; weights up to 1025 and 1125 lbs respectively. B.5 restrictor to 33mm, weight to 1185 lbs.
STU Request to correct E&O advanced aerodynamics #27290wordingwordingSTU wing assembly wording corrected: no part may be higher than roof height.
AS Request Ride Height Clarification #26598wordingwordingAS class ride height minimum clarified: five inches measured at rocker panel, excluding seams and stock effects.
P2 E&O Transmissions #27006engineslower · engineP2 cars limited to power application on maximum two wheels.
STU Remove -2mm penalty from SR20DET Nissan #26982enginefaster · engineSTU Nissan SR20DET removes -2mm penalty from Table B.
STU Request clarification for manifold and throttle in STU #27004wordingwordingSTU allows alternate intake manifolds on case-by-case basis; stock throttle device and manifold otherwise required.
P2 Request to restrict all cars #26246weightslower · weightP2 Enterprise minimum weight increased to 1375 lbs.; peak horsepower of sealed ESR engine reduced per CRB specification.
AS Request to Revert to 2017 Weights #25885weightfaster · weightAS Ford Mustang 79-93 non-Cobra drops 100 lbs to 3150; over 313 CID Cobra drops 100 lbs to 3450.
STU Request to clarify afterrmarket side skirts exhaust exit #26814aeroadded · aeroSTU aftermarket side skirts now allowed if they meet 3-inch ride height, lack ducts except jacks or exhaust, don't exceed fascia width, stay below door bottom, and don't reinforce chassis.
STU Wheel Flare wording #26872wordingwordingSTU wheel flare wording clarified: each fender may be flared to 2" with 1% weight penalty, maintaining OEM profile.
STU Request Ride Height Clarification #26597wordingwordingSTL and STU ride height measurement clarified: lowest rocker panel point without driver, excluding pinch weld.
STU Request to Use Japanese Mazda 13b Intake Manifold #25790engineadded · engineSTU Mazda 13B Bridge Port now permits ELITE ROTARY SHOP FD V2.0 intake manifold; stock throttle body requirement removed.
STU Request Alternate Intake for Mazda MZR In a Rear Wheel Drive App. #26352inductionadded · inductionSTU Mazda MZR gains alternate Goodwin intake manifold option with stock or Acura throttle body.
STU E&O Suspension #26424wordingwordingSTU alternate suspension components rule moved from section E to section D.
STU Revisit B20 VTEC #26530engineadded · engineSTU Honda/Acura B20 now permits B16 or B18 VTEC cylinder head and matching intake manifold.
STU Move Flared Fenders to STU Advanced Aero #26564aeroaeroSTU flared fenders up to 2" with 1% weight penalty moved from base to Advanced Aero.
STU TCA Civic SI E&O #26606inductionslower · inductionSTU Honda Civic Si TCA 2017- requires 37mm TIR throttle as of June 1, 2019.
STU S54 Spec line #26620cars addedcars addedSTU BMW S54B32 OEM classified separately from E46, displacement 3246 cc, minimum weight 3300 lbs, OEM engine mandatory.
P2 Change Engine Table Lines B.1 & B.5 #25777inductionslower · inductionP2 stock and modified engines get smaller restrictors (35.0mm, 34.0mm, 33.0mm) and heavier minimums (1025, 1125, 1185 lbs).
P2 Change Line A.1 restrictor size #26429engineslower · engineP2 Line A.1 restrictor reduced from 40mm to 38mm.
STU Request to Class Assignment for 2017 Civic #24287cars addedaddedHonda Civic Si 2017- added to STU with 1500cc displacement, 2800 lbs minimum weight, OEM engine and bodywork, specific HPD parts allowed.
STU Request to run E46 3246cc in STU #25126cars addedaddedSTU BMW E46 S54 OEM 3246cc added at 3300 lbs minimum; no Super Touring allowances, OEM intake and cams, 1mm overbore, compression +0.5 permitted.
STU Engine Classification for Rotary #25564engineadded · engineSTU Mazda 13B and 13B Bridge Port may use 13B RE or REW housings and intake with turbo removed.
STU K24/K20 Head Swap Clarification/Amendment #25899otheraddedSTU Honda K24 may use intake part numbers 17100-RRB-A00 or 17100-PRB-A10.
STU Request to Classify 12a Bridge Ported Rotary Engine #25985cars addedaddedSTU Mazda 12A Bridge Port added, minimum weight 2550 lbs, Nikki or Auto-type carburettor with specified modifications.
STU World Challenge Car Eligibility #26387wordingunclearSTU World Challenge car weight rule deleted; no replacement specified.
STU Request a phone call for discussion regarding weight #26398inductionfaster · inductionSTU AWD/RWD cars no longer must reduce restrictor 1 mm from table.
STU Advanced Aero E&O #26413aeroadded · aeroSTU rear wing maximum 12" cord, 72 sq in end plates each, roof height max, body width limit.
AS SMG Mustang eligibility in American sedan #26224cars addedaddedAS adds Spec Mustang SMG classification with 107.1 wheelbase, 3.73 gears, 355mm front and 300mm rear brakes.
P2 Request to Allow 1345cc Hayabusa Engines for Spec Line P2 Cars #25595cars addedaddedP2 Spec Line cars now allow 1345cc Hayabusa stock engines at 1050 lb minimum with 30mm restrictor.
P2 Change CN inlet restrictor implementation date #25816wordingwordingP2 Group CN Honda K20A-FD2 55mm intake restrictor implementation delayed from 1 January to 3 March 2019.
P2 Clarify Honda K20A-FD2 parts requirement #25950engineslower · engineP2 Honda K20A-FD2 Group CN must use stock intake manifold, 64mm throttle, 55mm restrictor at 1500 lbs minimum.
STU Request to Equalize Direct Injected Turbo Cars #24890cars addedaddedSTU adds Honda K20C1 Turbo I4, 1996 cc, 3025 lbs minimum weight, 36mm TIR required.
Every event the class ran, at any track, oldest to newest on the chart and newest first in the table. Each point is the class's best lap as a share of FE2's best on the same day: the weather, the track and its configuration cancel out, so one figure compares across tracks and years where lap times cannot. It still moves when the yardstick's own balance changes or its field thins, and an event the yardstick did not run has no point. A best from fewer than three cars is greyed. The rule changes that took effect between two events are folded between their rows.