BoP Lab / Classes / FC

FC vs STL vs SM vs FF pace at every track

Lap times across years say as much about the weather as the class. % of FC is each class's best lap as a share of FC's on the same day, so the conditions drop out: 100% is level, less is quicker, and a move in it is the class getting faster or slower against the field.

Class · click a class to switch, + to compare alongside (up to 4: remove one to add another)

ASB-SpecEPFAFC×FE2vsFF ×FPFVFXGT1GT2GTXHPPP2vsSM ×SMXSRF3vsSTL ×STUT1T2T3T4Show 51 inactive classes

Series Runoffs Super Tour Both

Reference class · the yardstick the % column and chart are measured against

Tracks · untick to narrow Auto Club Speedway Barber Motorsports Park Blackhawk Farms Raceway Buttonwillow Raceway Park Circuit of St. Louis (formerly Gateway Motorsports Circuit of the Americas Daytona International Speedway Grattan Raceway Hallett Motor Racing Circuit Homestead-Miami Speedway Indianapolis Motor Speedway Laguna Seca Michelin Raceway Road Atlanta Mid-Ohio Sports Car Course New Jersey Motorsports Park NOLA Motorsports Park Pacific Raceways Pittsburgh International Race Complex Portland International Raceway Pueblo Motorsports Park Road America Sebring International Raceway Sonoma Raceway Summit Point Raceway Thunderhill Raceway Park Virginia International Raceway Watkins Glen International Willow Springs Raceway World Wide Technology Raceway

Closest to the field: FC 100.0% of FC Yufeng Luo, Daytona International Speedway Runoffs 2015 race · STL 100.0% of FC Danny Steyn, Virginia International Raceway Runoffs 2022 race · SM 108.8% of FC Travis Wiley, Virginia International Raceway Runoffs 2022 race · FF 107.0% of FC Tim Kautz, Daytona International Speedway Runoffs 2015 qualifying

% of FCLap times

FCSTLSMFFsolid race · dashed qualifying · slower is lower

FCSTLSMFFsolid race · dashed qualifying · each class's best lap as a share of FC's at the same event (the reference class, changeable above); 100% is level, less is quicker, so up the chart is quicker

	Event	FC			STL					SM					FF
	Event	Qual best	Race best	Trap	Qual best	Race best	Trap	vs FC	% of FC	Qual best	Race best	Trap	vs FC	% of FC	Qual best	Race best	Trap	vs FC	% of FC
	Road America Runoffs 20262026-09-28	2:10.686Brandon Dixon · fastest of 10 · top 5 within 4.0s-0.573s (-0.44%)	2:11.389Brandon Dixon · fastest of 10 · top 5 within 2.7s-1.435s (-1.08%)	143.3Dean Kiriluk-1.8 mph (-1.2%)	2:30.537Derek Ketchie · fastest of 16 · top 5 within 2.9s-1.528s (-1.00%)	2:30.657Danny Steyn · fastest of 16 · top 5 within 0.6s-1.470s (-0.97%)	134.8Mike Taylor+2.6 mph (+2.0%)	+19.268squal +19.851s	114.7%qual 115.2%	2:42.173Brett Kowalski · fastest of 34 · top 5 within 0.3s-0.938s (-0.58%)	2:42.725Francisco Barroso · fastest of 35 · top 5 within 0.2s-1.705s (-1.04%)	119.6Wyatt Couch+0.3 mph (+0.3%)	+31.336squal +31.487s	123.8%qual 124.1%	2:23.047David Ybarra · fastest of 20 · top 5 within 1.4s-1.858s (-1.28%)	2:23.686Nathan Down · fastest of 20 · top 5 within 1.6s-1.855s (-1.27%)	138.9Tazio Stefanelli+0.5 mph (+0.3%)	+12.297squal +12.361s	109.4%qual 109.5%
10 rule changes (FC: 2, STL: 4, SM: 2, FF: 2)2 cars added · 2 weight · 1 tyres & wheels · 3 wording · 2 other · FF Kent 1600 compression ratio calculation parameters reorganized: bore size and valve protrusion limits moved to separate subsections for clarity. · SM/SMX Mazda rear toe link part number revised from 0000-04-5361426 to 0000-04-5361. · STL removes Mazda MX-5 Cup entirely; renames Spec MX5 Challenge to Spec MX5; renames Global Cup to MX-5 Cup (16-18); removes Global Cup (2019). · STL, STU weight calculation procedure clarified: positive percentages added first, negative subtracted second, then fixed weights applied. · SM/SMX part number 0000-10-6900 replaced with 0000-06-5016-KT in GCR 9.1.7.C.1.j.1.c. · STL adds Mazda BP 1.6, 1600cc, minimum weight 2160 lbs. · FC USF2000 Tube Frame may now use Hewland LD200 4-speed H-pattern as alternative to Hewland JL-200 5-speed sequential. · FC F2000 Metrik ZF2 minimum weight reduced to 1220 lbs. · FF clarifies alternative tire eligibility: homologated 1989 or earlier with rocker or outboard suspension all four corners; push-rod/pull-rod cars may seek approval. · STL minimum weights increase across all engine sizes, 1300cc to 1850cc up to 195–250 lbs.showhide 2026-07-01 FF Clarification in FF Kent 1600 Compression Ratio Paragraph #40293wordingwordingFF Kent 1600 compression ratio calculation parameters reorganized: bore size and valve protrusion limits moved to separate subsections for clarity. 2026-07-01 SM Rear Toe Link #40271wordingwordingSM/SMX Mazda rear toe link part number revised from 0000-04-5361426 to 0000-04-5361. 2026-07-01 STL Spec Line Clean Up #40344cars addedremovedcars addedSTL removes Mazda MX-5 Cup entirely; renames Spec MX5 Challenge to Spec MX5; renames Global Cup to MX-5 Cup (16-18); removes Global Cup (2019). 2026-06-01 STL Calculating Weight #40224wordingwordingSTL, STU weight calculation procedure clarified: positive percentages added first, negative subtracted second, then fixed weights applied. 2026-04-01 SM Part Number Change Request #39914otherunclearSM/SMX part number 0000-10-6900 replaced with 0000-06-5016-KT in GCR 9.1.7.C.1.j.1.c. 2026-04-01 STL Classifications #39885cars addedaddedSTL adds Mazda BP 1.6, 1600cc, minimum weight 2160 lbs. 2026-01-01 FC F2000 MZR Spec Line Clarity/Revision Requested #38927otheraddedFC USF2000 Tube Frame may now use Hewland LD200 4-speed H-pattern as alternative to Hewland JL-200 5-speed sequential. 2026-01-01 FC Adjust F2000 Metrik ZF2 weight #39612weight -20 lbsfasterweightFC F2000 Metrik ZF2 minimum weight reduced to 1220 lbs. 2026-01-01 FF Formula F Alternative Tire Rule Proposed Clarifications #39281tyres & wheelsaddedtyres & wheelsFF clarifies alternative tire eligibility: homologated 1989 or earlier with rocker or outboard suspension all four corners; push-rod/pull-rod cars may seek approval. 2026-01-01 STL Weight adjustment for STL #39579weightslowerweightSTL minimum weights increase across all engine sizes, 1300cc to 1850cc up to 195–250 lbs.
	Road America Runoffs 20252025-09-29	2:11.259Brandon Dixon · fastest of 10 · top 5 within 2.7s-0.367s (-0.28%)	2:12.824Brandon Dixon · fastest of 9 · top 5 within 2.3s+1.290s (+0.98%)	145.1Brandon Dixon+0.9 mph (+0.6%)	2:32.065Jose Osiris Pena · fastest of 14 · top 5 within 3.4s+2.002s (+1.33%)	2:32.127Jose Osiris Pena · fastest of 13 · top 5 within 2.4s+1.882s (+1.25%)	132.2Jon Sewell-2.1 mph (-1.5%)	+19.303squal +20.806s	114.5%qual 115.9%	2:43.111Bobby Gossett · fastest of 32 · top 5 within 0.3s+2.005s (+1.24%)	2:44.430Kyle Greenhill · fastest of 28 · top 5 within 0.3s+2.944s (+1.82%)	119.3Francisco Barroso-0.6 mph (-0.5%)	+31.606squal +31.852s	123.8%qual 124.3%	2:24.905Jonathan Kotyk · fastest of 17 · top 5 within 1.1s+2.353s (+1.65%)	2:25.541Calvin Kautz · fastest of 16 · top 5 within 0.5s+3.484s (+2.45%)	138.4Tazio Stefanelli-2.3 mph (-1.6%)	+12.717squal +13.646s	109.6%qual 110.4%
13 rule changes (FC: 2, STL: 3, SM: 4, FF: 4)3 weight · 2 tyres & wheels · 1 cars added · 1 engine · 5 wording · 1 other · Lotus Evora GT4 minimum weight drops to 2700 lbs; Elise Cup R to 2250 lbs; Elise SC and Exige SC to 2450–2550 lbs. · SMX drivers must submit data acquisition files on time or face suspension and $250 fine. · SMX penalty language clarified: level 1 and 3 infractions may carry $1,000 fines, level 2 and 4 may carry $500 fines. · FF adds rocker arm and outboard suspension cars option to use Hoosier bias ply slicks or VFF tyres; clarifies mixing rules. · SM tire marking rules clarified: one Hoosier SM 7.5 P205/50/ZR17 set per Super Tour weekend, impound after first dry session, damaged tires may be replaced with used tires only. · STL Mazda MX5 Challenge minimum weight now references GCR 9.1.7.1; mandatory component spec list removed, alternative tires only allowed. · FF adds alternative tire options for older cars with rocker arm or outboard suspension: bias ply slicks or VFF radials. · SMX OE instrument cluster must stay unmodified and connected; aftermarket dash allowed if wiring only re-routed; alternate gauges now permitted; foot pedal comfort mods allowed without relocation. · STL STU Mazda Miata alternate front hubs Mazda Motorsports Development Part #0000-04-5HUB-S1 approved. · FC tire rule clarified: four dry and four wet tires for Regionals and Majors, eight each for Runoffs; marking and declaration timing adjusted. · FF and FC sequential gearbox weight penalty reduces from 25 lbs to 10 lbs minimum weight addition. · FF and FC sequential gearbox weight penalty reduces from 25 lbs to 10 lbs minimum weight addition. · FF Honda Fit pistons: OEM 0.25mm oversize PN 13020-RB7-Z00 or Fast Forward PN FF800-110 now both allowed; standard diameter 73.240mm (2.8835 inches), minimum weight 198.0g.showhide 2025-08-01 STL Lotus Weight Reduction #38772weight -50 lbsfasterweightLotus Evora GT4 minimum weight drops to 2700 lbs; Elise Cup R to 2250 lbs; Elise SC and Exige SC to 2450–2550 lbs. 2025-06-01 SM SMX Data Submission - Penalties #38248otheraddedSMX drivers must submit data acquisition files on time or face suspension and $250 fine. 2025-06-01 SM Committee) SMX Penaly Clarification updated language #38337wordingwordingSMX penalty language clarified: level 1 and 3 infractions may carry $1,000 fines, level 2 and 4 may carry $500 fines. 2025-05-01 FF Page 228, FF tire rule 9.1.1.10.e #38251tyres & wheelsaddedtyres & wheelsFF adds rocker arm and outboard suspension cars option to use Hoosier bias ply slicks or VFF tyres; clarifies mixing rules. 2025-05-01 SM Clarify Tire Marking Regs #38005wordingwordingSM tire marking rules clarified: one Hoosier SM 7.5 P205/50/ZR17 set per Super Tour weekend, impound after first dry session, damaged tires may be replaced with used tires only. 2025-05-01 STL E&O: SMX Allowance in STL #37945wordingunclearSTL Mazda MX5 Challenge minimum weight now references GCR 9.1.7.1; mandatory component spec list removed, alternative tires only allowed. 2025-03-01 FF Formula F Proposal to Invite Older Cars Via a Tire Rule Change #37802tyres & wheelsaddedtyres & wheelsFF adds alternative tire options for older cars with rocker arm or outboard suspension: bias ply slicks or VFF radials. 2024-12-01 SM E&O SMX Regs 9.1.7.1.D.5.u-.w #37070wordingwordingSMX OE instrument cluster must stay unmodified and connected; aftermarket dash allowed if wiring only re-routed; alternate gauges now permitted; foot pedal comfort mods allowed without relocation. 2024-12-01 STL Request to Remove Miata Hubs from General category #37138cars addedaddedSTL STU Mazda Miata alternate front hubs Mazda Motorsports Development Part #0000-04-5HUB-S1 approved. 2024-11-01 FC 9.1.1.10.h. FC Tire Rule #36533wordingwordingFC tire rule clarified: four dry and four wet tires for Regionals and Majors, eight each for Runoffs; marking and declaration timing adjusted. 2024-11-01 FC Change FF/FC Weight with Sequential Gearbox #36651weightfasterweightFF and FC sequential gearbox weight penalty reduces from 25 lbs to 10 lbs minimum weight addition. 2024-11-01 FF Change FF/FC Weight with Sequential Gearbox #36651weightfasterweightFF and FC sequential gearbox weight penalty reduces from 25 lbs to 10 lbs minimum weight addition. 2024-11-01 FF Alternative Oversize Honda Fit Pistons #37064engineaddedengineFF Honda Fit pistons: OEM 0.25mm oversize PN 13020-RB7-Z00 or Fast Forward PN FF800-110 now both allowed; standard diameter 73.240mm (2.8835 inches), minimum weight 198.0g.
	Road America Runoffs 20242024-10-01	2:11.626Timothy Minor · fastest of 10 · top 5 within 1.3s-1.018s (-0.77%)	2:11.534Michael Varacins · fastest of 9 · top 5 within 1.8s-2.074s (-1.55%)	144.2Michael Varacins+1.8 mph (+1.2%)	2:30.063Joe Moser · fastest of 18 · top 5 within 3.7s-1.357s (-0.90%)	2:30.245Joe Moser · fastest of 16 · top 5 within 4.2s-1.870s (-1.23%)	134.3Joe Moser+1.3 mph (+1.0%)	+18.711squal +18.437s	114.2%qual 114.0%	2:41.106Ethan Goulart · fastest of 49 · top 5 within 0.5s-1.103s (-0.68%)	2:41.486Brett Kowalski · fastest of 43 · top 5 within 0.3s-2.262s (-1.38%)	119.9Alex Bertagnoli-1.4 mph (-1.2%)	+29.952squal +29.480s	122.8%qual 122.4%	2:22.552Calvin Kautz · fastest of 13 · top 5 within 1.1s-0.364s (-0.25%)	2:22.057Sebastian Mateo Naranjo · fastest of 13 · top 5 within 0.6s-2.211s (-1.53%)	140.7Calvin Kautz+2.6 mph (+1.9%)	+10.523squal +10.926s	108.0%qual 108.3%
12 rule changes (FC: 2, STL: 4, SM: 4, FF: 2)4 engine · 2 weight · 1 aero · 1 cars added · 3 wording · 1 other · FF EGR blanking plate rule clarified: VTEC activation valve must be retained and functioning, no modifications permitted. · SMX Spec MX-5 camera requirement: non-functioning recorder now will instead of may warrant penalty or disqualification. · SM and SMX must run latest AIM Data Logger Spec MX-5 ECU Protocol, effective 2024-09-01. · SMX Mazda MX-5 OE versus OEM definitions clarified in GCR section 9.1.7.1; wording change only. · SM and SMX now allow an alternate shifter bushing at the bottom of the shift lever. · FC F2000 Metrik ZF2 added as spec line car with Brembo 4-piston calipers and vented rotors permitted. · STL and STU now permit electric power steering pumps, OEM electric-assisted steering, or column-mounted electric steering assist systems. · STL normally aspirated minimum weights reduced: 1900cc to 2540 lbs, 1950cc to 2583 lbs, 2000cc to 2625 lbs; short-wheelbase FWD adds 1.25%; Honda B16/B17/B18C1 throttle to 51mm, B18C Type R and Mazda MZR to 50mm. · STL Mazda 12A: 5th and 6th intake port actuators and valves may no longer be removed or disabled. · FF Honda Fit gains Fast Forward oversize piston ring option PN FF800-100 as alternative to Riken or Nippon. · STL 79-85 RX7 12A now allows auto-type 2 bbl carburetor with 42mm choke on dual-y manifold, not just stock Nikki.showhide 2024-10-01 FF Update to FF EGR Blanking Plate Rule #36633wordingwordingFF EGR blanking plate rule clarified: VTEC activation valve must be retained and functioning, no modifications permitted. 2024-09-01 SM SMX Camera Rule Correction #36496wordingwordingSMX Spec MX-5 camera requirement: non-functioning recorder now will instead of may warrant penalty or disqualification. 2024-09-01 SM Committee) AIM ECU Protocol #36556engineaddedengineSM and SMX must run latest AIM Data Logger Spec MX-5 ECU Protocol, effective 2024-09-01. 2024-09-01 SM Committee) OE versus OEM Definitons #36608wordingwordingSMX Mazda MX-5 OE versus OEM definitions clarified in GCR section 9.1.7.1; wording change only. 2024-09-01 SM Committee) Shifter Bushing #36611otheraddedSM and SMX now allow an alternate shifter bushing at the bottom of the shift lever. 2024-04-01 FC Four Pot Calipers #35481cars addedaddedFC F2000 Metrik ZF2 added as spec line car with Brembo 4-piston calipers and vented rotors permitted. 2024-02-01 STL ST Electric-Assisted Steering Systems #35066aeroaddedaeroSTL and STU now permit electric power steering pumps, OEM electric-assisted steering, or column-mounted electric steering assist systems. 2024-02-01 STL BOP Adjustments #35112weightfasterweightSTL normally aspirated minimum weights reduced: 1900cc to 2540 lbs, 1950cc to 2583 lbs, 2000cc to 2625 lbs; short-wheelbase FWD adds 1.25%; Honda B16/B17/B18C1 throttle to 51mm, B18C Type R and Mazda MZR to 50mm. 2024-02-01 STL Mazda 12A #35320engineremovedengineSTL Mazda 12A: 5th and 6th intake port actuators and valves may no longer be removed or disabled. 2024-01-01 FC Please correct omitted punctuation #34890weight 2024-01-01 FF Honda Fit Oversize Piston Rings #35305engineaddedengineFF Honda Fit gains Fast Forward oversize piston ring option PN FF800-100 as alternative to Riken or Nippon. 2024-01-01 STL Alternate Carburetor Request for 79-85 RX7 12a #35181engineaddedengineSTL 79-85 RX7 12A now allows auto-type 2 bbl carburetor with 42mm choke on dual-y manifold, not just stock Nikki.
	Virginia International Raceway Runoffs 20232023-09-23	1:50.281Nolan Allaer · fastest of 11 · top 5 within 2.3s+0.386s (+0.35%)	1:51.169Nolan Allaer · fastest of 11 · top 5 within 2.5s-16.690s (-13.05%)	143.5Robert Allaer+2.3 mph (+1.7%)	2:05.779Danny Steyn · fastest of 22 · top 5 within 3.4s+0.305s (+0.24%)	2:06.682Joe Moser · fastest of 20 · top 5 within 1.5s-1.150s (-0.90%)	131.8Danny Steyn+0.1 mph (+0.1%)	+15.513squal +15.498s	114.0%qual 114.1%	2:14.986Danny Steyn · fastest of 52 · top 5 within 0.1s+0.322s (+0.24%)	2:16.229Julian DaCosta · fastest of 46 · top 5 within 0.3s-2.878s (-2.07%)	120.3Jim Drago+1.1 mph (+0.9%)	+25.060squal +24.705s	122.5%qual 122.4%	1:59.249Nolan Allaer · fastest of 8 · top 5 within 2.8s+0.034s (+0.03%)	2:00.583Jonathan Kotyk · fastest of 8 · top 5 within 0.4s-17.775s (-12.85%)	138.4Calvin Kautz+0.1 mph (+0.1%)	+9.414squal +8.968s	108.5%qual 108.1%
7 rule changes (FC: 3, STL: 2, SM: 1, FF: 1)2 cars added · 1 engine · 1 weight · 3 wording · FC tire marking rule clarified: four dry and four wet tires for Regional/Major/Super Tour, eight each for Runoffs; undeclared tire penalty removed. · USF2000 Van Diemen with Mazda MZR LF-DE 2.0L added to FC as spec line car; removed from FX. · STL ITA and ITS RX7, and ITS/ITA/ITB/ITC 1985+ models clarified to require tires per 9.1.4.2. · FF Honda Fit engine adds Fast Forward part number alternatives for intake, exhaust, oil system, and scavenge pump components. · FC/FF PE3-8400 ECU tune-file firmware version changes from V3.04.50 to V3.04.35. · SM Mazda MX-5 Miata 01-05 minimum weight rises to 2450 lbs, or 2465 with alternate bore. · Spec MX5 in STL allows ACT clutch 0000-02-5004-G6, wheels 17x8, Toyo RR and RA1 235-40-17 tyres, or alternatives on 17x7 per rules.showhide 2023-07-01 FC Review FC Runoffs Tire Marking Rule #34274wordingwordingFC tire marking rule clarified: four dry and four wet tires for Regional/Major/Super Tour, eight each for Runoffs; undeclared tire penalty removed. 2023-06-01 FC USF2000 Van Diemen with Mazda MZR LF-DE 2.0L in FC #34329cars addedaddedUSF2000 Van Diemen with Mazda MZR LF-DE 2.0L added to FC as spec line car; removed from FX. 2023-06-01 STL Clarify STL table B - IT spec notes on Tires #34187wordingwordingSTL ITA and ITS RX7, and ITS/ITA/ITB/ITC 1985+ models clarified to require tires per 9.1.4.2. 2023-03-01 FF Add Fast Forward Part Numbers for Honda Fit Engine #33752engineaddedengineFF Honda Fit engine adds Fast Forward part number alternatives for intake, exhaust, oil system, and scavenge pump components. 2023-01-01 FC E&O 9.1.1.B.16.j #33634wordingwordingFC/FF PE3-8400 ECU tune-file firmware version changes from V3.04.50 to V3.04.35. 2023-01-01 SM BOP for NB1 and NB2 #32309weightslowerweightSM Mazda MX-5 Miata 01-05 minimum weight rises to 2450 lbs, or 2465 with alternate bore. 2023-01-01 STL Spec MX5 in STL #33473cars addedaddedSpec MX5 in STL allows ACT clutch 0000-02-5004-G6, wheels 17x8, Toyo RR and RA1 235-40-17 tyres, or alternatives on 17x7 per rules.
	Virginia International Raceway Runoffs 20222022-09-24	1:49.895Nolan Allaer · fastest of 12 · top 5 within 1.5s-1.305s (-1.17%)	2:07.859Nolan Allaer · fastest of 13 · top 5 within 3.8s+15.685s (+13.98%)	141.2Tim Minor-0.6 mph (-0.4%)	2:05.474Danny Steyn · fastest of 24 · top 5 within 2.3s-1.729s (-1.36%)	2:07.832Danny Steyn · fastest of 22 · top 5 within 1.9s+0.559s (+0.44%)	131.7Trever Degioanni-3.2 mph (-2.3%)	-0.027squal +15.579s	100.0%qual 114.2%	2:14.664Danny Steyn · fastest of 60 · top 5 within 0.2s+0.112s (+0.08%)	2:19.107Travis Wiley · fastest of 58 · top 5 within 0.9s+2.648s (+1.94%)	119.2Jonathan Neudorf-0.6 mph (-0.5%)	+11.248squal +24.769s	108.8%qual 122.5%	1:59.215Jonathan Kotyk · fastest of 13 · top 5 within 1.2s-0.348s (-0.29%)	2:18.358Jonathan Kotyk · fastest of 12 · top 5 within 2.4s-2.116s (-1.51%)	138.3Tim Kautz+2.2 mph (+1.6%)	+10.499squal +9.320s	108.2%qual 108.5%
11 rule changes (FC: 5, STL: 5, SM: 1)1 engine · 1 tyres & wheels · 1 weight · 8 wording · FC Zetec ECU: Performance Electronics model designation changed from PE-3 to PE3-8400; monitor firmware updated to V3.04.50. · SM Majors must run authorized Penske shock and mount; Regional competitors not required until further evaluation. · STU single throttle body weight reduction removed; minimum weights revised down to 2990 lbs at 3000cc from 3300 lbs. · STL and STU Improved Touring vehicles must now conform to section 9.1.4 Tires & Wheels. · FC chassis/frame section cleaned up: panels between main tubes must prevent cockpit intrusion; suspension cannot mount to exterior panels; engine/gearbox exempt from load-bearing restrictions. · STL/STU intake manifold and cylinder head porting clarified as free; intake and exhaust porting wording removed. · STL Mazda Renesis flat plate restrictor increases from 55mm to 60mm. · STL 79-85 RX7 12A allows emissions removal and jet correction on stock Nikki carb. · FC Zetec ECU requirements clarified: Pectel T2 or PE-3 required with specified communications ports and SCCA tune-file/map from official website. · FC composite anti-intrusion panels of non-uniform thickness limited to eight fasteners per side. · FC tire marking requirements clarified: competitor must ensure tires declared, marked, and logged by Tech before qualifying or race use.showhide 2022-07-01 FC Add Specification to Performance Electronics ECU for Ford Zetec #32761wordingwordingFC Zetec ECU: Performance Electronics model designation changed from PE-3 to PE3-8400; monitor firmware updated to V3.04.50. 2022-04-01 SM Update GCR Section 9.1.7.3.A.1. #32217wordingwordingSM Majors must run authorized Penske shock and mount; Regional competitors not required until further evaluation. 2022-03-01 STL Single TB Weight Modifiers #31449weightfasterweightSTU single throttle body weight reduction removed; minimum weights revised down to 2990 lbs at 3000cc from 3300 lbs. 2022-03-01 STL Improved Touring Tires #32063tyres & wheelstyres & wheelsSTL and STU Improved Touring vehicles must now conform to section 9.1.4 Tires & Wheels. 2022-01-01 FC Clean up Chassis/Frame section #31867wordingwordingFC chassis/frame section cleaned up: panels between main tubes must prevent cockpit intrusion; suspension cannot mount to exterior panels; engine/gearbox exempt from load-bearing restrictions. 2022-01-01 STL Throttling Device Clarification #31323wordingwordingSTL/STU intake manifold and cylinder head porting clarified as free; intake and exhaust porting wording removed. 2022-01-01 STL Mazda Renesis Restriction #31467enginefasterengineSTL Mazda Renesis flat plate restrictor increases from 55mm to 60mm. 2022-01-01 STL Clarification of 79-85 RX7 Spec line #31621wordingwordingSTL 79-85 RX7 12A allows emissions removal and jet correction on stock Nikki carb. 2021-12-01 FC Clarify Zetec ECU requirements #31554wordingwordingFC Zetec ECU requirements clarified: Pectel T2 or PE-3 required with specified communications ports and SCCA tune-file/map from official website. 2021-11-01 FC Clarify composite anti-intrusion panel language #31426wordingwordingFC composite anti-intrusion panels of non-uniform thickness limited to eight fasteners per side. 2021-11-01 FC Clarify tire marking requirements #31455wordingwordingFC tire marking requirements clarified: competitor must ensure tires declared, marked, and logged by Tech before qualifying or race use.
	Indianapolis Motor Speedway Runoffs 20212021-09-25	1:36.787Trent Walko · fastest of 31 · top 5 within 1.7s+0.451s (+0.47%)	1:36.980Simon Sikes · fastest of 31 · top 5 within 2.0s+0.090s (+0.09%)	141.6Tim Minor	1:51.665Danny Steyn · fastest of 42 · top 5 within 1.7s-0.982s (-0.87%)	2:02.711Joe Moser · fastest of 37 · top 5 within 3.2s+10.122s (+8.99%)	131.8Max Gee	+25.731squal +14.878s	126.5%qual 115.4%	1:57.695Brian Henderson · fastest of 90 · top 5 within 0.5s-0.611s (-0.52%)	1:58.837Brian Henderson · fastest of 88 · top 5 within 0.3s-0.263s (-0.22%)	119.8Kyle Greenhill	+21.857squal +20.908s	122.5%qual 121.6%	1:44.359Jonathan Kotyk · fastest of 24 · top 5 within 1.1s-0.242s (-0.23%)	1:55.676Jonathan Kotyk · fastest of 23 · top 5 within 1.8s+11.152s (+10.67%)	141.6Nicholas Sheppard	+18.696squal +7.572s	119.3%qual 107.8%
20 rule changes (FC: 1, STL: 15, SM: 1, FF: 3)3 engine · 3 weight · 2 aero · 2 cars added · 1 induction · 1 suspension & brakes · 5 wording · 3 other · STL Mazda Spec MX-5 removes redundant specification line referencing 2014 regulations. · STL Volkswagen 2.0L TFSI 1984 cc engine permitted without turbocharger, meeting all other STL specs. · STL Pontiac Solstice/Saturn Sky allowed 4 inch ride height. · STL Mazda B5 DOHC added to class; must meet all STL regulations. · STL Honda B16A (JDM) restrictor reduced from 54mm to 53mm. · FF block relief permitted only as needed to fit an allowed crankshaft. · SM adds procedure for CRB-approved obsolete parts and BOP testing in sanctioned events with point forfeiture. · ST oil coolers and filters now explicitly listed as addable or substitutable parts in vents and breathers section. · FC Pinto engine loses 10 lbs to 1190; Pinto aluminum head loses 10 lbs to 1190; Zetec loses 10 lbs to 1210. · STL GM Ecotec LNF now permits any Ecotec engine family with 55mm flat plate restrictor. · ST 90-05 Mazda Miata allowed alternate front wheel hub Mazda Motorsports Development Part #0000-04-5HUB-S1. · ST cars may now relocate ABS actuation hardware and wiring anywhere in the engine compartment. · STL rear wing trailing edge may be mounted no further rearward than the center of the rearmost part approved bodywork. · STL alternate transmissions now allow OEM gear sets and input shaft modifications for fitment. · STL RWD strut-front cars lose 2.5% weight penalty, others lose 3% penalty for FWD parity. · STL Honda F20C drops 2% weight penalty, minimum weight reduced. · STL Honda B16/B17/B18C1 restrictor reduced to 53mm, B18C variants and Mazda MZR to 52mm. · FF class cylinder head now permits optional coolant bleed line pipe thread fitting to swirl tower. · FF Honda LC1 ECU supplied by HPD is permitted effective 12/1/2020 with HPD lambda sensor. · ST aero devices and reference areas must include end plates, exclude fasteners under 1/2" protrusion.showhide 2021-09-01 STL Request to clean up Spec MX-5 Redundancy #31069wordingwordingSTL Mazda Spec MX-5 removes redundant specification line referencing 2014 regulations. 2021-06-01 STL VW Engine Request #30625engineaddedengineSTL Volkswagen 2.0L TFSI 1984 cc engine permitted without turbocharger, meeting all other STL specs. 2021-05-01 STL Solstice Ride Height #30183otheraddedSTL Pontiac Solstice/Saturn Sky allowed 4 inch ride height. 2021-05-01 STL Request Mazda B5 DOHC #30420cars addedaddedSTL Mazda B5 DOHC added to class; must meet all STL regulations. 2021-05-01 STL Honda B16A (JDM) Restrictor change #30531engineslowerengineSTL Honda B16A (JDM) restrictor reduced from 54mm to 53mm. 2021-04-01 FF Kent crankshaft clarification #30426wordingwordingFF block relief permitted only as needed to fit an allowed crankshaft. 2021-04-01 SM Updates - Obsolete Parts & BOP Parts #30438wordingaddedSM adds procedure for CRB-approved obsolete parts and BOP testing in sanctioned events with point forfeiture. 2021-04-01 STL ST Oil Coolers E&O Correction to 9.1.4.2.H #30388wordingwordingST oil coolers and filters now explicitly listed as addable or substitutable parts in vents and breathers section. 2021-03-01 FC Request for FC Weight Change #30171weightfasterweightFC Pinto engine loses 10 lbs to 1190; Pinto aluminum head loses 10 lbs to 1190; Zetec loses 10 lbs to 1210. 2021-03-01 STL GM Ecotec engines in STL #30247engineaddedengineSTL GM Ecotec LNF now permits any Ecotec engine family with 55mm flat plate restrictor. 2021-03-01 STL Super Touring Alternate Miata Hubs #30345cars addedaddedST 90-05 Mazda Miata allowed alternate front wheel hub Mazda Motorsports Development Part #0000-04-5HUB-S1. 2021-02-01 STL Brake Component Relocation #29990suspension & brakessuspension & brakesST cars may now relocate ABS actuation hardware and wiring anywhere in the engine compartment. 2021-02-01 STL Super Touring Wing Clarification #30111aeroaeroSTL rear wing trailing edge may be mounted no further rearward than the center of the rearmost part approved bodywork. 2021-02-01 STL Transmission Options #30118otheraddedSTL alternate transmissions now allow OEM gear sets and input shaft modifications for fitment. 2021-01-01 STL Request for FWD and RWD Parity #29728weightfasterweightSTL RWD strut-front cars lose 2.5% weight penalty, others lose 3% penalty for FWD parity. 2021-01-01 STL Request to Remove Honda F20C 2% Weight Penalty #29815weightfasterweightSTL Honda F20C drops 2% weight penalty, minimum weight reduced. 2021-01-01 STL Request for FWD and RWD Parity #30023inductionslowerinductionSTL Honda B16/B17/B18C1 restrictor reduced to 53mm, B18C variants and Mazda MZR to 52mm. 2020-12-01 FF Allow Optional Coolant Bleed Line to Correct a Known Problem #29673otheraddedFF class cylinder head now permits optional coolant bleed line pipe thread fitting to swirl tower. 2020-12-01 FF Clarification regarding Honda LC1 ECU implementation date #29684wordingwordingFF Honda LC1 ECU supplied by HPD is permitted effective 12/1/2020 with HPD lambda sensor. 2020-12-01 STL Request clarification on wing measurement #29640aeroaeroST aero devices and reference areas must include end plates, exclude fasteners under 1/2" protrusion.
	Road America Runoffs 20202020-10-02	2:12.644Robert Allaer · fastest of 13 · top 5 within 2.1s	2:13.608Robert Allaer · fastest of 11 · top 5 within 1.2s	142.4Robert Allaer	2:31.420Danny Steyn · fastest of 33 · top 5 within 3.1s	2:32.115Joe Moser · fastest of 30 · top 5 within 1.5s	132.9Darin Treakle	+18.507squal +18.776s	113.9%qual 114.2%	2:42.209Kyle Greenhill · fastest of 77 · top 5 within 0.5s	2:43.748Preston Pardus · fastest of 75 · top 5 within 1.0s	121.3Kyle Greenhill	+30.140squal +29.565s	122.6%qual 122.3%	2:22.916Simon Sikes · fastest of 14 · top 5 within 1.6s	2:24.268Jeffrey Bartz · fastest of 14 · top 5 within 0.4s	138.1Jeffrey Bartz	+10.660squal +10.272s	108.0%qual 107.7%
21 rule changes (FC: 4, STL: 11, SM: 2, FF: 4)8 engine · 4 cars added · 1 suspension & brakes · 1 tyres & wheels · 1 weight · 6 wording · FC ECU maps clarified: SCCA Club or 2013 Pro map required, available on SCCA website; 1.340 restrictor reminder. · SM allows aftermarket radiators in original location with stock OEM cooling fan, and permits 1990-1997 cars to install upper radiator seal NA75-50-OK7A. · FC Zetec engine minimum weight increases 20 lbs to 1220 lbs. · FF Honda LC1 ECU implementation date clarified to pending, contingent on SCCA receiving sufficient support materials. · SM rear brake caliper may use single bracket under upper retaining bolt head to prevent pin failure. · STL and STU clarify weight adjustment calculation order: engine adjustments first, then chassis percentage additions, subtractions, and fixed pounds. · STL STU rear wing Gurney flap terminology clarified from wicker to Gurney flap in mounting and chord rules. · GT3 and STU add Borg-Warner EFR6258 turbocharger to approved turbo lists. · STL adds Mazda MX-5 Global Cup 16-18 at 2450 lbs minimum and 2019 at 2550 lbs minimum. · STL Mazda MX-5 Club 06-15 allowed header part number 0000-06-5407-NC. · STL Acura/Honda B18 and B18C engines: restrictor sizes swapped, B18C1 removed from allowed variants. · STL Honda B18 loses 53mm restrictor requirement; B18C1 added with 54mm restrictor, B18C1 removed from other variants. · FF Kent Engine alternator becomes optional instead of not required. · STU GM Ecotech LNF now permitted without turbo, with LE5 head and intake manifold, meeting STL specs. · STL Mazda MZR restrictor reduced from 54 mm to 53 mm. · STL Mazda MZR restrictor reduces from 55 mm to 53 mm. · FF permits HPD LC1 ECU with lambda sensor; E1 ECU no longer supported but existing units may continue. · FF rain tyres now allow Hoosier W3 Radial 185/60R13 front and 205/60R13 rear. · STL Mazda Spec MX5 Challenge adds approved wheel part numbers 0000-04-5706-GM, 0000-04-5706-SL to notes. · FC allows Eagle #CRS5483F3D connecting rods alongside original Ford; crankshaft replacement clarified to original Ford only. · FC allows Mahle #930169439 piston as new option alongside Ford original, Sealed Power #H872cp, United Engine and Machine #SO2763.showhide 2020-10-01 FC Urgent: SCCA PE3 map unsuitable #29475wordingwordingFC ECU maps clarified: SCCA Club or 2013 Pro map required, available on SCCA website; 1.340 restrictor reminder. 2020-10-01 SM Radiator E&O Clarifications #29294wordingwordingSM allows aftermarket radiators in original location with stock OEM cooling fan, and permits 1990-1997 cars to install upper radiator seal NA75-50-OK7A. 2020-08-01 FC Request for weight adjustments to equalize FC competition. #28888weightslowerweightFC Zetec engine minimum weight increases 20 lbs to 1220 lbs. 2020-08-01 FF Clarification regarding Honda LC1 ECU implementation #29135wordingwordingFF Honda LC1 ECU implementation date clarified to pending, contingent on SCCA receiving sufficient support materials. 2020-08-01 SM Modifications to prevent failures of Rear Brake Caliper Pin #28953suspension & brakessuspension & brakesSM rear brake caliper may use single bracket under upper retaining bolt head to prevent pin failure. 2020-08-01 STL Minimum Weight Determination #27695wordingwordingSTL and STU clarify weight adjustment calculation order: engine adjustments first, then chassis percentage additions, subtractions, and fixed pounds. 2020-08-01 STL ST Gurney flap Wicker clarification #29012wordingwordingSTL STU rear wing Gurney flap terminology clarified from wicker to Gurney flap in mounting and chord rules. 2020-07-01 STL Request for Addition to GT3 Approved Turbo List #27576cars addedaddedGT3 and STU add Borg-Warner EFR6258 turbocharger to approved turbo lists. 2020-06-01 STL Request to add 2016-2019 GMX-5 Spec line #28604cars addedaddedSTL adds Mazda MX-5 Global Cup 16-18 at 2450 lbs minimum and 2019 at 2550 lbs minimum. 2020-06-01 STL Request to update PN for MX-5 #28622cars addedaddedSTL Mazda MX-5 Club 06-15 allowed header part number 0000-06-5407-NC. 2020-06-01 STL Correction - Clarification Honda/Acura B18B engine Letter # 26209 #28873wordingwordingSTL Acura/Honda B18 and B18C engines: restrictor sizes swapped, B18C1 removed from allowed variants. 2020-05-01 STL STL Honda B18 restrictor changes #28794enginefasterengineSTL Honda B18 loses 53mm restrictor requirement; B18C1 added with 54mm restrictor, B18C1 removed from other variants. 2020-04-01 FF E&O FF Kent Engine alternator language #28204engineaddedengineFF Kent Engine alternator becomes optional instead of not required. 2020-04-01 STL Change GM LNF 2.0 Allowance to LSJ Engine for Viable STL 2.0 #27884engineaddedengineSTU GM Ecotech LNF now permitted without turbo, with LE5 head and intake manifold, meeting STL specs. 2020-04-01 STL Acura/Honda B18C engine chart. Reduce the current 54 mm flat plat #28663engineslowerengineSTL Mazda MZR restrictor reduced from 54 mm to 53 mm. 2020-04-01 STL Mazda MZR engine chart. Reduce the current 55 mm flat plate to 53 #28664engineslowerengineSTL Mazda MZR restrictor reduces from 55 mm to 53 mm. 2020-03-01 FF Honda Racing HPD low cost ECU proposal #27563engineaddedengineFF permits HPD LC1 ECU with lambda sensor; E1 ECU no longer supported but existing units may continue. 2020-03-01 FF Update rain tire designation #28443tyres & wheelsaddedtyres & wheelsFF rain tyres now allow Hoosier W3 Radial 185/60R13 front and 205/60R13 rear. 2020-03-01 STL Request to add wheel part numbers #28342cars addedaddedSTL Mazda Spec MX5 Challenge adds approved wheel part numbers 0000-04-5706-GM, 0000-04-5706-SL to notes. 2019-12-01 FC Request for Better Zetec Connecting Rods #27710engineaddedengineFC allows Eagle #CRS5483F3D connecting rods alongside original Ford; crankshaft replacement clarified to original Ford only. 2019-12-01 FC Add Alternate Piston #27795engineaddedengineFC allows Mahle #930169439 piston as new option alongside Ford original, Sealed Power #H872cp, United Engine and Machine #SO2763.
	Virginia International Raceway Runoffs 20192019-10-05	1:51.200Robert Allaer · fastest of 10 · top 5 within 3.1s	1:52.174Robert Allaer · fastest of 9 · top 5 within 2.7s	141.8Robert Allaer	2:07.203Danny Steyn · fastest of 36 · top 5 within 1.8s	2:07.273Cliff Ira · fastest of 35 · top 5 within 1.4s	134.8Cliff Ira	+15.099squal +16.003s	113.5%qual 114.4%	2:14.552Todd Buras · fastest of 60 · top 5 within 0.2s	2:16.459Elivan Goulart · fastest of 56 · top 5 within 0.4s	119.8Jim Drago	+24.285squal +23.352s	121.6%qual 121.0%	1:59.563Tyler O'Connor · fastest of 14 · top 5 within 1.4s	2:20.474Jonathan Kotyk · fastest of 14 · top 5 within 6.3s	136.2Derek Ketchie	+28.300squal +8.363s	125.2%qual 107.5%
20 rule changes (FC: 2, STL: 11, SM: 4, FF: 3)4 engine · 3 cars added · 1 aero · 1 weight · 7 wording · 4 other · STL adds Mazda Spec MX-5 Challenge, 2000cc displacement, 2500 lb minimum weight, with mandatory Roush, Penske, Eibach, and other specified components. · STU allows alternate intake manifolds on case-by-case basis; stock throttle device and manifold otherwise required. · STL Acura/Honda B18 except C engine restrictor increased from 53mm to 54mm flat plate. · FC Wiseco piston and Crower rod part numbers updated; minimum weight unchanged at 976 grams. · STL and STU ride height measurement clarified: lowest rocker panel point without driver, excluding pinch weld. · SM fuel pump and filter now permitted as Mazda or OEM equivalent part. · STL adds VW 1.8L R4 20VT 1781 cc, 1781 minimum weight, naturally aspirated only. · STL Mazda Renesis minimum weight reduced to 2700 lbs. · STL Mazda MX-5 Cup brake pad compound now open. · STL adds Acura/Honda B18C1 GSR with 1797cc displacement, 54mm flat plate restrictor required, porting outside 1" allowance prohibited. · STL Mazda 12 and 13B now permit port matching; porting ban removed. · FF Honda Fit cylinder honing increased to 73.315mm and oversize pistons PN 13020-RB7-Z00 now permitted with matching ring packs. · FF intake manifold thermal wrap now permitted if easily removable for inspection; no coating allowed. · FF clarifies coolant and oil catch tank capacity requirements: coolant minimum one U.S. pint, oil minimum one U.S. quart per system. · SM allows factory Mazda ECU and injector harnesses (P/N 0000-10-020E-99, 0000-10-080D-99) on 1999–2000 model year cars, unmodified. · SM electrical rules reorganized and clarified; alternator now externally regulated only by OEM ECU or master kill switch; harness repair by splicing permitted. · SM tire tread protrusion language removed from GCR 9.1.7.C.5. · FC Wiseco piston and connecting rod minimum weight corrected to 976 grams. · STL B17 now requires 54mm flat plate restrictor; B18C Type R variants move to 54mm restrictor, weight chart baseline. · STL Mazda Miata removes maximum displacement limit; minimum weight corrected to unspecified figure.showhide 2019-10-01 STL Request to Classify Spec MX-5 Challenge in STL #27399cars addedaddedSTL adds Mazda Spec MX-5 Challenge, 2000cc displacement, 2500 lb minimum weight, with mandatory Roush, Penske, Eibach, and other specified components. 2019-07-01 STL Request clarification for manifold and throttle in STU #27004wordingwordingSTU allows alternate intake manifolds on case-by-case basis; stock throttle device and manifold otherwise required. 2019-05-31 STL Request Restrictor Plate correction #26779enginefasterengineSTL Acura/Honda B18 except C engine restrictor increased from 53mm to 54mm flat plate. 2019-05-01 FC E&O Wiseco piston and Crower connecting rod #26659wordingwordingFC Wiseco piston and Crower rod part numbers updated; minimum weight unchanged at 976 grams. 2019-05-01 STL Request Ride Height Clarification #26597wordingwordingSTL and STU ride height measurement clarified: lowest rocker panel point without driver, excluding pinch weld. 2019-03-01 SM Request to allow aftermarket fuel filters. #26370otheraddedSM fuel pump and filter now permitted as Mazda or OEM equivalent part. 2019-03-01 STL Request to Allow VW 1.8L Engine #25614cars addedaddedSTL adds VW 1.8L R4 20VT 1781 cc, 1781 minimum weight, naturally aspirated only. 2019-03-01 STL Request to reduce weight of RX8 with Renesis rotary #25781weight -100 lbsfasterweightSTL Mazda Renesis minimum weight reduced to 2700 lbs. 2019-03-01 STL Request for Open Brake Pads On Mazda MX-5 Cup NC #25821otheraddedSTL Mazda MX-5 Cup brake pad compound now open. 2019-03-01 STL Request to clarify B18C1 GSR Honda B motor table #26209cars addedaddedSTL adds Acura/Honda B18C1 GSR with 1797cc displacement, 54mm flat plate restrictor required, porting outside 1" allowance prohibited. 2019-03-01 STL Port Matching #26415enginefasterengineSTL Mazda 12 and 13B now permit port matching; porting ban removed. 2019-02-01 FF Request for Oversize Honda Fit Pistons #25810enginefasterengineFF Honda Fit cylinder honing increased to 73.315mm and oversize pistons PN 13020-RB7-Z00 now permitted with matching ring packs. 2019-02-01 FF Heat Shield - Fit Intake #26102aeroaddedaeroFF intake manifold thermal wrap now permitted if easily removable for inspection; no coating allowed. 2019-02-01 FF Request catch cans/tanks clarification #26158wordingwordingFF clarifies coolant and oil catch tank capacity requirements: coolant minimum one U.S. pint, oil minimum one U.S. quart per system. 2019-02-01 SM Request 99-00 replacement Wire harnesses #25602otheraddedSM allows factory Mazda ECU and injector harnesses (P/N 0000-10-020E-99, 0000-10-080D-99) on 1999–2000 model year cars, unmodified. 2019-02-01 SM Organize and Clarify 9.1.7.C.1.o. #25913wordingwordingSM electrical rules reorganized and clarified; alternator now externally regulated only by OEM ECU or master kill switch; harness repair by splicing permitted. 2019-02-01 SM Strike Tire Tread Language #26123wordingremovedSM tire tread protrusion language removed from GCR 9.1.7.C.5. 2019-01-01 FC Correct Wiseco piston and connecting rod #25809wordingwordingFC Wiseco piston and connecting rod minimum weight corrected to 976 grams. 2019-01-01 STL Request to equalize FPR Reduction on all B-Series Vtec Engines #24746enginefasterengineSTL B17 now requires 54mm flat plate restrictor; B18C Type R variants move to 54mm restrictor, weight chart baseline. 2019-01-01 STL Request E&O for Mazda Miata Spec Line #25955otherunclearSTL Mazda Miata removes maximum displacement limit; minimum weight corrected to unspecified figure.
	Sonoma Raceway Runoffs 20182018-10-10	1:32.571Timothy de Silva · fastest of 16 · top 5 within 1.8s	1:34.053Mitch Egner · fastest of 12 · top 5 within 1.6s	133.1Robert Armington	1:49.138Danny Steyn · fastest of 19 · top 5 within 2.5s	1:49.754Danny Steyn · fastest of 17 · top 5 within 2.5s	103.2Craig McHaffie	+15.701squal +16.567s	116.7%qual 117.9%	1:54.355Ken Sutherland · fastest of 48 · top 5 within 0.7s	1:55.278Michael Carter · fastest of 48 · top 5 within 0.3s	102.2Danny Steyn	+21.225squal +21.784s	122.6%qual 123.5%	1:41.612Jonathon Kotyk · fastest of 22 · top 5 within 1.7s	1:42.049Jonathon Kotyk · fastest of 22 · top 5 within 1.3s	115.7Denny Renfrow	+7.996squal +9.041s	108.5%qual 109.8%
No rule changes on record between these events
	Indianapolis Motor Speedway Runoffs 20172017-09-25	1:36.336Austin McCusker · fastest of 14 · top 5 within 2.3s	1:36.890Tim Minor · fastest of 14 · top 5 within 3.8s		1:52.647Adam Roberts · fastest of 57 · top 5 within 0.8s	1:52.589Eric Kutil · fastest of 50 · top 5 within 1.2s		+15.699squal +16.311s	116.2%qual 116.9%	1:58.306Chris Haldeman · fastest of 86 · top 5 within 0.5s	1:59.100Michael Gagliardo · fastest of 83 · top 5 within 0.6s		+22.210squal +21.970s	122.9%qual 122.8%	1:44.601Zach Holden · fastest of 36 · top 5 within 1.2s	1:44.524Jonathon Kotyk · fastest of 36 · top 5 within 0.5s		+7.634squal +8.265s	107.9%qual 108.6%
No rule changes on record between these events
	Mid-Ohio Sports Car Course Runoffs 20162016-09-19	1:21.962John LaRue · fastest of 7 · top 5 within 2.6s	1:22.049Nigel Saurino · fastest of 7 · top 5 within 3.0s		1:35.439John Schmitt · fastest of 34 · top 5 within 1.5s	1:36.625Kevin Boehm · fastest of 31 · top 5 within 0.6s		+14.576squal +13.477s	117.8%qual 116.4%	1:40.514Justin Hille · fastest of 45 · top 5 within 0.3s	1:40.764Michael Carter · fastest of 44 · top 5 within 0.3s		+18.715squal +18.552s	122.8%qual 122.6%	1:29.213Neil Verhagen · fastest of 14 · top 5 within 2.1s	1:30.133Neil Verhagen · fastest of 14 · top 5 within 1.4s		+8.084squal +7.251s	109.9%qual 108.8%
No rule changes on record between these events
	Daytona International Speedway Runoffs 20152015-09-21	1:54.477Yufeng Luo · fastest of 11 · top 5 within 2.5s	1:55.135Yufeng Luo · fastest of 10 · top 5 within 2.1s		2:09.672Kevin Boehm · fastest of 37 · top 5 within 2.5s	2:10.269Kevin Boehm · fastest of 37 · top 5 within 2.1s		+15.134squal +15.195s	113.1%qual 113.3%	2:18.661Andrew Carbonell · fastest of 62 · top 5 within 0.6s	2:24.067Todd Lamb · fastest of 59 · top 5 within 0.8s		+28.932squal +24.184s	125.1%qual 121.1%	2:02.489Tim Kautz · fastest of 25 · top 5 within 1.1s	2:03.383Rick Payne · fastest of 22 · top 5 within 0.8s		+8.248squal +8.012s	107.2%qual 107.0%

By track

Track	Events	Typical % of FC	Best	Latest
Road America	4	100.0%	100.0%Runoffs 2020	100.0%Runoffs 2026
Virginia International Raceway	3	100.0%	100.0%Runoffs 2019	100.0%Runoffs 2023
Indianapolis Motor Speedway	2	100.0%	100.0%Runoffs 2017	100.0%Runoffs 2021
Daytona International Speedway	1	100.0%	100.0%Runoffs 2015	100.0%Runoffs 2015
Mid-Ohio Sports Car Course	1	100.0%	100.0%Runoffs 2016	100.0%Runoffs 2016
Sonoma Raceway	1	100.0%	100.0%Runoffs 2018	100.0%Runoffs 2018

About this data

Every event the class ran, at any track, oldest to newest on the chart and newest first in the table. Each point is the class's best lap as a share of FC's best on the same day: the weather and the day cancel out, so one figure compares across years where lap times cannot; a class that suits one track more than another still reads differently there. It still moves when the yardstick's own balance changes or its field thins, and an event the yardstick did not run has no point. A best from fewer than three cars is greyed. The rule changes that took effect between two events are folded between their rows.