BoP Labbeta

BoP Lab / World Wide Technology Raceway

P2 vs SM vs GTL pace at World Wide Technology Raceway

Class · click a class to switch, + to compare alongside (up to 4)
AS+B-Spec+EP+F5+FA+FC+FE2+FF+FP+FV+FX+GT1+GT2+GT3+vsGTL×HP+P2×vsSM×SRF3+STL+STU+T1+T2+T3+T4+
Reference class · the others' laps as a share of this one's at the same event, so years compare despite weather; + a class above to measure against it

Quickest here: P2 1:10.693 Fred Michael, ADS 2020 race · SM 1:11.508 Kyle Greenhill, ADS 2020 qualifying · GTL 1:10.770 Peter Zekert, ADS 2020 qualifying

EventP2SMGTL
Qual bestRace bestTrapQual bestRace bestTrapvs P2% of P2Qual bestRace bestTrapvs P2% of P2
ADS 2020 ADS202020-05-291:12.299Fred Michael · only car1:10.693Fred Michael · only car122.7Fred Michael1:11.508Kyle Greenhill · fastest of 13 · top 5 within 0.7s1:11.767Jim Drago · fastest of 12 · top 5 within 1.2s116.3Cooper Lilly+1.074squal -0.791s101.5%qual 98.9%1:10.770Peter Zekert · fastest of 7 · top 5 within 4.9s1:11.188Peter Zekert · fastest of 6 · top 5 within 2.9s120.3Roy Lopshire+0.495squal -1.529s100.7%qual 97.9%
39 earlier rule changes on record, in force before ADS 2020 (from 2019)8 induction · 7 cars added · 4 aero · 3 engine · 3 weight · 1 removed · 12 wording · 1 other · GTL wing mount openings excluded from square inch limit. · P2 Enterprises Sports Racer adds 55mm flat plate intake restrictor Part # WM303013 as alternative to SIR. · P2 Enterprise Sports Racer 2.3L engine now requires SIR or Flat Plate restrictor sized in 0.5mm increments. · GTL wing mounting posts limited to 85 square inches exposed area each, measured flat from side view. · GTL wing mounting posts limited to 85 square inches exposed area each, measured flat from side. · GTL wing endplates change from 8.5×3.0 inch rectangle to maximum 64 square inches. · GTL Mazda 12A Street Port minimum weight reduced to 1950 lbs from 2000 lbs. · P2 fly-by-wire throttle control wording clarified: stock ECUs with drive-by-wire must activate original throttle shaft mechanism. · GT1, GT2, GT3, GTL, GTX may omit windshield clips if factory glass is bonded per original specifications. · Factory Five Type 65 Coupe R with Ford 302/351 or 5.0/5.2L NA added to GTX-MISC at 2600 lbs. · GTL adds Jetta Mk1 two door classification effective 2020-01-01. · P2 adds BMW to motorcycle-based engine options in 4-cycle line alongside Kawasaki, Suzuki, Yamaha, Honda. · GTL Honda CRX 84-87 and 88-91 remove IRS option with 2.5% weight penalty. · P2 Honda K20A-FD2 non-composite chassis must use 55mm flat plate intake restrictor at 1500 lbs minimum weight. · GTL Fun Cup Beetle engine weight specified at 1850 lbs with sealed SOHC 1780cc specification. · P2 motorcycle engines: Stock restrictor 36.5mm to 35mm, modified 37.5mm to 34mm; B.5 restrictor 37.5mm to 33mm. All weights increase 25 lbs. · GTL Fun Cup Beetle removes reference to VW engine table; Fun Cup engine spec remains 1.8L at 2040 lbs. · GTL Honda CRZ 10-14, CRZ 15-16, and Insight 00-06 gain alternate wheelbase option of 90.6 in. · P2 cars limited to power application on maximum two wheels, effective 2019-07-01. · P2 Enterprise minimum weight increases to 1375 lbs; peak horsepower of sealed ESR engine reduced per CRB specification. · GTL adds VW Fun Cup Beetle, all model years, 2-door RWD, 94.5-inch wheelbase. · GTX tube frame cars gain fuel injection with 90mm maximum throttle body size. · Ligier JS2 R classified in GTX, no performance parameters specified in filing. · GTL Mazda 13B may use 25mm SIR with 175 lbs weight penalty added. · GT1 and GT2/GT3/LITE ride height requirements removed from GCR sections 9.1.2.D.5.a.1 and 9.1.2.F.7.b. · GTL Mazda 12A may use 28mm SIR plus 175 lbs. · GTL Mustang 94-04 newly classified in GTL. · P2 stock engine restrictor shrinks to 35.0mm and weight rises to 1025 lbs; modified engine restrictor to 34.0mm, weight to 1125 lbs; line B.5 restrictor to 33.0mm, weight to 1185 lbs. · P2 Line A.1 restrictor reduced from 40mm to 38mm. · SM fuel pump and filter must be Mazda or OEM Equivalent part. · SM 1999-2000 model year cars may use replacement Mazda ECU and injector harnesses, unmodified. · SM electrical rules reorganized and clarified; alternator external regulation now prohibited except via OEM ECU/kill switch. · SM removes tire tread protrusion beyond fender opening requirement from GCR 9.1.7.C.5. · GTL Mini 1275-1399 Iron and Aluminum Crossflow gain 75 lbs weight reduction to 125 lbs with OE common sump gearbox. · GTL BMC thru Rover Group removes long inactive Mini engines: 948, 970, 1071, 1098. · GTX FIA GT3: Audi R8 40mm restrictor 2900 lbs, BMW Z4 70mm 2800 lbs, Ferrari 488 35mm restrictor 3025 lbs classified. · P2 Spec Line cars now allow 1345cc Hayabusa stock engines at 1050 lbs with 30mm restrictor. · P2 Group CN Honda K20A-FD2 55mm restrictor implementation delayed from 1/1/2019 to 3/1/2019. · P2 Honda K20A-FD2 in CN chassis must use stock intake manifold with 64mm throttle body and 55mm restrictor at 1500 lbs minimum weight.showhide
  • GTL GTL Wing Rule #28754aeroaeroGTL wing mount openings excluded from square inch limit.
  • P2 SCCA Enterprises ESR / P2 engine restrictor testing #28669engineengineP2 Enterprises Sports Racer adds 55mm flat plate intake restrictor Part # WM303013 as alternative to SIR.
  • P2 Add ESR inlet restrictor #27869inductionslowerP2 Enterprise Sports Racer 2.3L engine now requires SIR or Flat Plate restrictor sized in 0.5mm increments.
  • GTL Wing Mounting Upright Size #27641aeroaeroGTL wing mounting posts limited to 85 square inches exposed area each, measured flat from side view.
  • GTL Wing Mounting Upright Size #27641aeroaeroGTL wing mounting posts limited to 85 square inches exposed area each, measured flat from side.
  • GTL GTL wing end plates addition #28243aerofasterGTL wing endplates change from 8.5×3.0 inch rectangle to maximum 64 square inches.
  • GTL Clarification to letter #27406 #28309weight -50 lbsfasterGTL Mazda 12A Street Port minimum weight reduced to 1950 lbs from 2000 lbs.
  • P2 Request for Fly by Wire Rule Wording Change #28247wordingwordingP2 fly-by-wire throttle control wording clarified: stock ECUs with drive-by-wire must activate original throttle shaft mechanism.
  • GTL Windshield Clips #27323wordingwordingGT1, GT2, GT3, GTL, GTX may omit windshield clips if factory glass is bonded per original specifications.
  • GTL Request Factory Five Daytona coupe classification #26308cars addedcars addedFactory Five Type 65 Coupe R with Ford 302/351 or 5.0/5.2L NA added to GTX-MISC at 2600 lbs.
  • GTL Request to Classify the MK1 two door Jetta #27648cars addedcars addedGTL adds Jetta Mk1 two door classification effective 2020-01-01.
  • P2 Request for addition of BMW Engine in P2 Engine Table #27821cars addedcars addedP2 adds BMW to motorcycle-based engine options in 4-cycle line alongside Kawasaki, Suzuki, Yamaha, Honda.
  • GTL 88-91 Honda CRX Spec Line Correction #27233wordingwordingGTL Honda CRX 84-87 and 88-91 remove IRS option with 2.5% weight penalty.
  • P2 Update Engine Table Line E notes #27414inductionslowerP2 Honda K20A-FD2 non-composite chassis must use 55mm flat plate intake restrictor at 1500 lbs minimum weight.
  • GTL Fun Cup Beetle #27334wordingwordingGTL Fun Cup Beetle engine weight specified at 1850 lbs with sealed SOHC 1780cc specification.
  • P2 Update P2 Engine Table spec lines to reflect 3/1/2019 #27254inductionslowerP2 motorcycle engines: Stock restrictor 36.5mm to 35mm, modified 37.5mm to 34mm; B.5 restrictor 37.5mm to 33mm. All weights increase 25 lbs.
  • GTL GTL #26960wordingwordingGTL Fun Cup Beetle removes reference to VW engine table; Fun Cup engine spec remains 1.8L at 2040 lbs.
  • GTL Request CRZ wheelbase change #26896wordingunclearGTL Honda CRZ 10-14, CRZ 15-16, and Insight 00-06 gain alternate wheelbase option of 90.6 in.
  • P2 E&O Transmissions #27006otherslowerP2 cars limited to power application on maximum two wheels, effective 2019-07-01.
  • P2 Request to restrict all cars #26246weightslowerP2 Enterprise minimum weight increases to 1375 lbs; peak horsepower of sealed ESR engine reduced per CRB specification.
  • GTL Request to Classify VW Fun Cup Beetle #25986cars addedcars addedGTL adds VW Fun Cup Beetle, all model years, 2-door RWD, 94.5-inch wheelbase.
  • GTL Request GTX Fuel injection for previous GT-1 tube frame cars #26141inductionfasterGTX tube frame cars gain fuel injection with 90mm maximum throttle body size.
  • GTL Request to Classify Ligier JS2 R #26535cars addedcars addedLigier JS2 R classified in GTX, no performance parameters specified in filing.
  • GTL Request for GTL Mazda 13B SIR Increase with Penalty #26572engineslowerGTL Mazda 13B may use 25mm SIR with 175 lbs weight penalty added.
  • GTL Request Ride Height Clarification #26600wordingwordingGT1 and GT2/GT3/LITE ride height requirements removed from GCR sections 9.1.2.D.5.a.1 and 9.1.2.F.7.b.
  • GTL Request Mazda 12a Rotary SIR Increase #26081inductionfasterGTL Mazda 12A may use 28mm SIR plus 175 lbs.
  • GTL Request to Classify Mustang 2 Body in GTL #26222cars addedcars addedGTL Mustang 94-04 newly classified in GTL.
  • P2 Change Engine Table Lines B.1 & B.5 #25777inductionslowerP2 stock engine restrictor shrinks to 35.0mm and weight rises to 1025 lbs; modified engine restrictor to 34.0mm, weight to 1125 lbs; line B.5 restrictor to 33.0mm, weight to 1185 lbs.
  • P2 Change Line A.1 restrictor size #26429inductionslowerP2 Line A.1 restrictor reduced from 40mm to 38mm.
  • SM Request to allow aftermarket fuel filters. #26370wordingwordingSM fuel pump and filter must be Mazda or OEM Equivalent part.
  • SM Request 99-00 replacement Wire harnesses #25602wordingwordingSM 1999-2000 model year cars may use replacement Mazda ECU and injector harnesses, unmodified.
  • SM Organize and Clarify 9.1.7.C.1.o. #25913wordingwordingSM electrical rules reorganized and clarified; alternator external regulation now prohibited except via OEM ECU/kill switch.
  • SM Strike Tire Tread Language #26123wordingwordingSM removes tire tread protrusion beyond fender opening requirement from GCR 9.1.7.C.5.
  • GTL Request for GTL Mini Adjustments #25754weightfasterGTL Mini 1275-1399 Iron and Aluminum Crossflow gain 75 lbs weight reduction to 125 lbs with OE common sump gearbox.
  • GTL BMC thru Rover Group remove long inactive mini #25771removedremovedGTL BMC thru Rover Group removes long inactive Mini engines: 948, 970, 1071, 1098.
  • GTL GTX Homologation table update #26034cars addedcars addedGTX FIA GT3: Audi R8 40mm restrictor 2900 lbs, BMW Z4 70mm 2800 lbs, Ferrari 488 35mm restrictor 3025 lbs classified.
  • P2 Request to Allow 1345cc Hayabusa Engines for Spec Line P2 Cars #25595enginefasterP2 Spec Line cars now allow 1345cc Hayabusa stock engines at 1050 lbs with 30mm restrictor.
  • P2 Change CN inlet restrictor implementation date #25816wordingwordingP2 Group CN Honda K20A-FD2 55mm restrictor implementation delayed from 1/1/2019 to 3/1/2019.
  • P2 Clarify Honda K20A-FD2 parts requirement #25950inductionslowerP2 Honda K20A-FD2 in CN chassis must use stock intake manifold with 64mm throttle body and 55mm restrictor at 1500 lbs minimum weight.

Best is the class's fastest lap in that event's qualifying or race sessions, with the driver who set it, how many cars set a time that session and how close the top five were; a best from fewer than three cars is greyed. With two or more classes, "vs" is the gap of each class's best to the first class's at the same event. "% of P2" is the class's best as a share of P2's best at the same event (100% is level, less is quicker): weather and track condition move every class together, so this compares across years where the raw times do not. It still breaks when P2's own field changes or one session was wet and another dry. Newest event first. The coloured figure under each value is the change from the previous event that has one (green is quicker, red slower). Whole laps only, so events with different sector layouts still compare. Weather and track condition are not accounted for.