BoP Lab / Laguna Seca

P2 vs P1 vs AS vs SM pace at Laguna Seca

Quickest here: P2 1:26.231 Chuck Bona, Super Tour Jul 2019 race · P1 1:21.626 Jim Devenport, Super Tour Jul 2019 qualifying · AS 1:40.712 Clark Nunes, Super Tour Jul 2019 qualifying · SM 1:46.110 Tristan Littlehale, Super Tour Jul 2019 race

	Event	P2			P1					AS					SM
	Event	Qual best	Race best	Trap	Qual best	Race best	Trap	vs P2	% of P2	Qual best	Race best	Trap	vs P2	% of P2	Qual best	Race best	Trap	vs P2	% of P2
	Super Tour Jul 2019 ST19JUL262019-07-26	1:26.927Tim Day Jr · fastest of 5 · top 5 within 7.8s	1:26.231Chuck Bona · fastest of 7 · top 5 within 6.8s	116.8Tim Day Jr	1:21.626Jim Devenport · fastest of 6 · top 5 within 5.2s	1:21.922Todd Slusher · fastest of 6 · top 5 within 4.1s	121.3John Manfroy	-4.309squal -5.301s	95.0%qual 93.9%	1:40.712Clark Nunes · fastest of 4 · top 4 within 7.9s	1:40.914Clark Nunes · fastest of 4 · top 4 within 8.0s	103.0Michael Thompson	+14.683squal +13.785s	117.0%qual 115.9%	1:46.159Tristan Littlehale · fastest of 11 · top 5 within 1.9s	1:46.110Tristan Littlehale · fastest of 11 · top 5 within 1.2s	87.0Justin Casey	+19.879squal +19.232s	123.1%qual 122.1%
26 earlier rule changes on record, in force before Super Tour Jul 2019 (from 2019)3 cars added · 3 engine · 2 weight · 1 induction · 14 wording · 3 other · P1 permits mechanical, solenoid, and air-shifters; prohibits electronic pre-selection and multi-wheel power. · P1 minimum bodywork height rule moved and restated with new 115cm aerodynamic part height limit. · P1 consolidates fender louver rules into one section; removes duplicate allowance for louvers and clarifies brake and engine air ducts are permitted. · P2 cars limited to power application on maximum two wheels. · P2 Enterprise minimum weight increased to 1375 lbs.; peak horsepower of sealed ESR engine reduced per CRB specification. · AS Ford Mustang 79-93 non-Cobra drops 100 lbs to 3150; over 313 CID Cobra drops 100 lbs to 3450. · P1 anti-intrusion panels now allowed anywhere on chassis sides instead of specified locations. · P1 bodywork wording clarified: comfort and safety for driver and passenger or driver only. · P1 Engine Table reference cleaned up; no performance change. · P1 Mazda Renesis Rotary engine spec line removed from Engine Table. · P1 Staudacher and Honda K20A-FD2 engine table wording clarified; no performance change. · P1 closed cockpit single-seat cars remain prohibited; rule moved from subsection J.5 to B.4. · P2 stock and modified engines get smaller restrictors (35.0mm, 34.0mm, 33.0mm) and heavier minimums (1025, 1125, 1185 lbs). · P2 Line A.1 restrictor reduced from 40mm to 38mm. · SM fuel pump and filter now permitted as Mazda or OEM equivalent part. · AS adds Spec Mustang SMG classification with 107.1 wheelbase, 3.73 gears, 355mm front and 300mm rear brakes. · P1 engine table reference corrected from 'above' to 'below'; ETC/FBW/DBW throttle wording clarified on sensor and fail-safe requirements. · SM allows factory Mazda ECU and injector harnesses (P/N 0000-10-020E-99, 0000-10-080D-99) on 1999–2000 model year cars, unmodified. · SM electrical rules reorganized and clarified; alternator now externally regulated only by OEM ECU or master kill switch; harness repair by splicing permitted. · SM tire tread protrusion language removed from GCR 9.1.7.C.5. · P1 removes TIR inlet restrictor option; deletes requirement for single turbo/supercharger unit with single restrictor. · P1 CN-spec Honda K20A-FD2 clarified: stock OEM parts required, no machining allowed. · P1 engine rules correct grammar and remove head designs from specification table. · P2 Spec Line cars now allow 1345cc Hayabusa stock engines at 1050 lb minimum with 30mm restrictor. · P2 Group CN Honda K20A-FD2 55mm intake restrictor implementation delayed from 1 January to 3 March 2019. · P2 Honda K20A-FD2 Group CN must use stock intake manifold, 64mm throttle, 55mm restrictor at 1500 lbs minimum.showhide 2019-07-01 P1 E&O Transmissions #27005otheraddedP1 permits mechanical, solenoid, and air-shifters; prohibits electronic pre-selection and multi-wheel power. 2019-07-01 P1 Move minimum height provision to #27031wordingwordingP1 minimum bodywork height rule moved and restated with new 115cm aerodynamic part height limit. 2019-07-01 P1 Remove duplicative fender louver provision #27033wordingwordingP1 consolidates fender louver rules into one section; removes duplicate allowance for louvers and clarifies brake and engine air ducts are permitted. 2019-07-01 P2 E&O Transmissions #27006engineslower · engineP2 cars limited to power application on maximum two wheels. 2019-06-01 P2 Request to restrict all cars #26246weightslower · weightP2 Enterprise minimum weight increased to 1375 lbs.; peak horsepower of sealed ESR engine reduced per CRB specification. 2019-05-31 AS Request to Revert to 2017 Weights #25885weightfaster · weightAS Ford Mustang 79-93 non-Cobra drops 100 lbs to 3150; over 313 CID Cobra drops 100 lbs to 3450. 2019-05-31 P1 Missing word E&O #26919wordingwordingP1 anti-intrusion panels now allowed anywhere on chassis sides instead of specified locations. 2019-05-31 P1 E&O correction to GCR 9.1.8.C.C. #26927wordingwordingP1 bodywork wording clarified: comfort and safety for driver and passenger or driver only. 2019-05-01 P1 Clean up reference to engine table #26648wordingwordingP1 Engine Table reference cleaned up; no performance change. 2019-05-01 P1 Remove redundant spec line #26692cars addedremoved · cars addedP1 Mazda Renesis Rotary engine spec line removed from Engine Table. 2019-04-01 P1 Clean Up Engine Table Language #26590wordingwordingP1 Staudacher and Honda K20A-FD2 engine table wording clarified; no performance change. 2019-03-01 P1 Move single-seat closed cockpit provision to #26376wordingwordingP1 closed cockpit single-seat cars remain prohibited; rule moved from subsection J.5 to B.4. 2019-03-01 P2 Change Engine Table Lines B.1 & B.5 #25777inductionslower · inductionP2 stock and modified engines get smaller restrictors (35.0mm, 34.0mm, 33.0mm) and heavier minimums (1025, 1125, 1185 lbs). 2019-03-01 P2 Change Line A.1 restrictor size #26429engineslower · engineP2 Line A.1 restrictor reduced from 40mm to 38mm. 2019-03-01 SM Request to allow aftermarket fuel filters. #26370otheraddedSM fuel pump and filter now permitted as Mazda or OEM equivalent part. 2019-02-01 AS SMG Mustang eligibility in American sedan #26224cars addedaddedAS adds Spec Mustang SMG classification with 107.1 wheelbase, 3.73 gears, 355mm front and 300mm rear brakes. 2019-02-01 P1 Correct errors in GCR section 9.1.8.C.J #26144wordingwordingP1 engine table reference corrected from 'above' to 'below'; ETC/FBW/DBW throttle wording clarified on sensor and fail-safe requirements. 2019-02-01 SM Request 99-00 replacement Wire harnesses #25602otheraddedSM allows factory Mazda ECU and injector harnesses (P/N 0000-10-020E-99, 0000-10-080D-99) on 1999–2000 model year cars, unmodified. 2019-02-01 SM Organize and Clarify 9.1.7.C.1.o. #25913wordingwordingSM electrical rules reorganized and clarified; alternator now externally regulated only by OEM ECU or master kill switch; harness repair by splicing permitted. 2019-02-01 SM Strike Tire Tread Language #26123wordingremovedSM tire tread protrusion language removed from GCR 9.1.7.C.5. 2019-01-01 P1 Remove redundant inlet restrictor provisions #25877wordingwordingP1 removes TIR inlet restrictor option; deletes requirement for single turbo/supercharger unit with single restrictor. 2019-01-01 P1 Clarify Honda K20A-FD2 parts requirement #25949wordingwordingP1 CN-spec Honda K20A-FD2 clarified: stock OEM parts required, no machining allowed. 2019-01-01 P1 Correct GCR section 9.1.8.C.J errors #25966wordingwordingP1 engine rules correct grammar and remove head designs from specification table. 2019-01-01 P2 Request to Allow 1345cc Hayabusa Engines for Spec Line P2 Cars #25595cars addedaddedP2 Spec Line cars now allow 1345cc Hayabusa stock engines at 1050 lb minimum with 30mm restrictor. 2019-01-01 P2 Change CN inlet restrictor implementation date #25816wordingwordingP2 Group CN Honda K20A-FD2 55mm intake restrictor implementation delayed from 1 January to 3 March 2019. 2019-01-01 P2 Clarify Honda K20A-FD2 parts requirement #25950engineslower · engineP2 Honda K20A-FD2 Group CN must use stock intake manifold, 64mm throttle, 55mm restrictor at 1500 lbs minimum.

About this data

Best is the class's fastest lap in that event's qualifying or race sessions, with the driver who set it, how many cars set a time that session and how close the top five were; a best from fewer than three cars is greyed. With two or more classes, "vs" is the gap of each class's best to the first class's at the same event. "% of P2" is the class's best as a share of P2's best at the same event (100% is level, less is quicker): weather and track condition move every class together, so this compares across years where the raw times do not. It still breaks when P2's own field changes or one session was wet and another dry. Newest event first. The coloured figure under each value is the change from the previous event that has one (green is quicker, red slower). Whole laps only, so events with different sector layouts still compare. Weather and track condition are not accounted for.