BoP Labbeta

BoP Lab / World Wide Technology Raceway

P2 vs AS pace at World Wide Technology Raceway

Class · click a class to switch, + to compare alongside (up to 4)
vsAS×B-Spec+EP+F5+FA+FC+FE2+FF+FP+FV+FX+GT1+GT2+GT3+GTL+HP+P2×SM+SRF3+STL+STU+T1+T2+T3+T4+
Reference class · the others' laps as a share of this one's at the same event, so years compare despite weather; + a class above to measure against it

Quickest here: P2 1:10.693 Fred Michael, ADS 2020 race · AS 1:08.494 Philip Smith, ADS 2020 qualifying

EventP2AS
Qual bestRace bestTrapQual bestRace bestTrapvs P2% of P2
ADS 2020 ADS202020-05-291:12.299Fred Michael · only car1:10.693Fred Michael · only car122.7Fred Michael1:08.494Philip Smith · fastest of 3 · top 3 within 5.0s1:09.095Philip Smith · fastest of 3 · top 3 within 2.6s141.6Philip Smith-1.598squal -3.805s97.7%qual 94.7%
22 earlier rule changes on record, in force before ADS 2020 (from 2019)6 induction · 5 cars added · 4 weight · 2 engine · 1 suspension & brakes · 3 wording · 1 other · AS Chevrolet/Pontiac Camaro & Firebird (82-92) loses 50 lbs, to 3500. · P2 Enterprises Sports Racer adds 55mm flat plate intake restrictor Part # WM303013 as alternative to SIR. · P2 Enterprise Sports Racer 2.3L engine now requires SIR or Flat Plate restrictor sized in 0.5mm increments. · P2 fly-by-wire throttle control wording clarified: stock ECUs with drive-by-wire must activate original throttle shaft mechanism. · AS rear trailing arms may be replaced with tubular arms maintaining stock length and axle location purpose only. · AS Ford and GM full-prep cars get 200 lb weight reduction, up from 150 lb. · 05-10 Ford Mustang Coupe GT 4.6L OHC classified AS with 3200 lbs minimum weight, HR cam restricted prep. · AS 10-15 Chevrolet Camaro Full Prep classified with 3400 lbs base weight, over 313 CID engine 3700 lbs maximum. · P2 adds BMW to motorcycle-based engine options in 4-cycle line alongside Kawasaki, Suzuki, Yamaha, Honda. · AS Spec Mustang (SMG) added as Restricted Prep class. · P2 Honda K20A-FD2 non-composite chassis must use 55mm flat plate intake restrictor at 1500 lbs minimum weight. · P2 motorcycle engines: Stock restrictor 36.5mm to 35mm, modified 37.5mm to 34mm; B.5 restrictor 37.5mm to 33mm. All weights increase 25 lbs. · AS class minimum ride height clarified to 5 inches measured at rocker panel, excluding seams and cladding. · P2 cars limited to power application on maximum two wheels, effective 2019-07-01. · P2 Enterprise minimum weight increases to 1375 lbs; peak horsepower of sealed ESR engine reduced per CRB specification. · AS Ford Mustang (79-93) 313 CID and under loses 100 lbs to 3150; over 313 CID loses 100 lbs to 3450. · P2 stock engine restrictor shrinks to 35.0mm and weight rises to 1025 lbs; modified engine restrictor to 34.0mm, weight to 1125 lbs; line B.5 restrictor to 33.0mm, weight to 1185 lbs. · P2 Line A.1 restrictor reduced from 40mm to 38mm. · AS Spec Mustang (SMG) newly classified with 107.1 wheelbase, 3.73 gears, 355mm front brakes, 300mm rear. · P2 Spec Line cars now allow 1345cc Hayabusa stock engines at 1050 lbs with 30mm restrictor. · P2 Group CN Honda K20A-FD2 55mm restrictor implementation delayed from 1/1/2019 to 3/1/2019. · P2 Honda K20A-FD2 in CN chassis must use stock intake manifold with 64mm throttle body and 55mm restrictor at 1500 lbs minimum weight.showhide
  • AS weight adjustments for 2020 season #28785weight -50 lbsfasterAS Chevrolet/Pontiac Camaro & Firebird (82-92) loses 50 lbs, to 3500.
  • P2 SCCA Enterprises ESR / P2 engine restrictor testing #28669engineengineP2 Enterprises Sports Racer adds 55mm flat plate intake restrictor Part # WM303013 as alternative to SIR.
  • P2 Add ESR inlet restrictor #27869inductionslowerP2 Enterprise Sports Racer 2.3L engine now requires SIR or Flat Plate restrictor sized in 0.5mm increments.
  • P2 Request for Fly by Wire Rule Wording Change #28247wordingwordingP2 fly-by-wire throttle control wording clarified: stock ECUs with drive-by-wire must activate original throttle shaft mechanism.
  • AS Rear Trailing Arms #28007suspension & brakessuspension & brakesAS rear trailing arms may be replaced with tubular arms maintaining stock length and axle location purpose only.
  • AS Weight reduction for cars running iron heads #28010weightfasterAS Ford and GM full-prep cars get 200 lb weight reduction, up from 150 lb.
  • AS 05-10 Mustang with HR cam classification #28226cars addedcars added05-10 Ford Mustang Coupe GT 4.6L OHC classified AS with 3200 lbs minimum weight, HR cam restricted prep.
  • AS 10-15 Camaro Full Prep classification #28227cars addedcars addedAS 10-15 Chevrolet Camaro Full Prep classified with 3400 lbs base weight, over 313 CID engine 3700 lbs maximum.
  • P2 Request for addition of BMW Engine in P2 Engine Table #27821cars addedcars addedP2 adds BMW to motorcycle-based engine options in 4-cycle line alongside Kawasaki, Suzuki, Yamaha, Honda.
  • AS Request to add SMG to 9.1.6.B.1 AS Intent #27140cars addedcars addedAS Spec Mustang (SMG) added as Restricted Prep class.
  • P2 Update Engine Table Line E notes #27414inductionslowerP2 Honda K20A-FD2 non-composite chassis must use 55mm flat plate intake restrictor at 1500 lbs minimum weight.
  • P2 Update P2 Engine Table spec lines to reflect 3/1/2019 #27254inductionslowerP2 motorcycle engines: Stock restrictor 36.5mm to 35mm, modified 37.5mm to 34mm; B.5 restrictor 37.5mm to 33mm. All weights increase 25 lbs.
  • AS Request Ride Height Clarification #26598wordingwordingAS class minimum ride height clarified to 5 inches measured at rocker panel, excluding seams and cladding.
  • P2 E&O Transmissions #27006otherslowerP2 cars limited to power application on maximum two wheels, effective 2019-07-01.
  • P2 Request to restrict all cars #26246weightslowerP2 Enterprise minimum weight increases to 1375 lbs; peak horsepower of sealed ESR engine reduced per CRB specification.
  • AS Request to Revert to 2017 Weights #25885weightfasterAS Ford Mustang (79-93) 313 CID and under loses 100 lbs to 3150; over 313 CID loses 100 lbs to 3450.
  • P2 Change Engine Table Lines B.1 & B.5 #25777inductionslowerP2 stock engine restrictor shrinks to 35.0mm and weight rises to 1025 lbs; modified engine restrictor to 34.0mm, weight to 1125 lbs; line B.5 restrictor to 33.0mm, weight to 1185 lbs.
  • P2 Change Line A.1 restrictor size #26429inductionslowerP2 Line A.1 restrictor reduced from 40mm to 38mm.
  • AS SMG Mustang eligibility in American sedan #26224cars addedcars addedAS Spec Mustang (SMG) newly classified with 107.1 wheelbase, 3.73 gears, 355mm front brakes, 300mm rear.
  • P2 Request to Allow 1345cc Hayabusa Engines for Spec Line P2 Cars #25595enginefasterP2 Spec Line cars now allow 1345cc Hayabusa stock engines at 1050 lbs with 30mm restrictor.
  • P2 Change CN inlet restrictor implementation date #25816wordingwordingP2 Group CN Honda K20A-FD2 55mm restrictor implementation delayed from 1/1/2019 to 3/1/2019.
  • P2 Clarify Honda K20A-FD2 parts requirement #25950inductionslowerP2 Honda K20A-FD2 in CN chassis must use stock intake manifold with 64mm throttle body and 55mm restrictor at 1500 lbs minimum weight.

Best is the class's fastest lap in that event's qualifying or race sessions, with the driver who set it, how many cars set a time that session and how close the top five were; a best from fewer than three cars is greyed. With two or more classes, "vs" is the gap of each class's best to the first class's at the same event. "% of P2" is the class's best as a share of P2's best at the same event (100% is level, less is quicker): weather and track condition move every class together, so this compares across years where the raw times do not. It still breaks when P2's own field changes or one session was wet and another dry. Newest event first. The coloured figure under each value is the change from the previous event that has one (green is quicker, red slower). Whole laps only, so events with different sector layouts still compare. Weather and track condition are not accounted for.