BoP Lab / Laguna Seca

P1 vs SRF3 pace at Laguna Seca

Quickest here: P1 1:21.626 Jim Devenport, Hoosier SCCA Super Tour (San Francisco Region) qualifying · SRF3 1:37.644 TJ Acker, Hoosier SCCA Super Tour (San Francisco Region) qualifying

	Event	P1			SRF3
	Event	Qual best	Race best	Trap	Qual best	Race best	Trap	vs P1	% of P1
	Hoosier SCCA Super Tour (San Francisco Region) ST19JUL262019-07-26	1:21.626Jim Devenport · fastest of 6 · top 5 within 5.2s	1:21.922Todd Slusher · fastest of 6 · top 5 within 4.1s	121.3John Manfroy	1:37.644TJ Acker · fastest of 25 · top 5 within 0.8s	1:38.588Steve Fogg · fastest of 25 · top 5 within 0.7s	99.9Mike Miserendino	+16.666squal +16.018s	120.3%qual 119.6%
16 earlier rule changes on record, in force before Hoosier SCCA Super Tour (San Francisco Region) (from 2019)1 removed · 15 wording · P1 allows mechanical and solenoid shifters, prohibits electronic controls and pre-selected changes. · P1 bodywork minimum height provision moved to aerodynamic section; 115cm height limit for aero parts added. · P1 clarifies fender louver and brake duct rules, consolidating duplicative provisions in GCR 9.1.8.C. · SRF drivers may now use Dash Windscreen Kit P/N 1180103 or P/N 180102. · P1 anti-intrusion panels now allowed anywhere on chassis sides, previously restricted. · P1 bodywork wording corrected: 'a passenger' becomes 'passenger' in three GCR sections. · SRF3 nose assembly must use approved multi-piece design; no modifications allowed except as specified. · P1 Engine Table reference cleaned up; no performance change. · P1 Mazda Renesis Rotary removed from Engine Table specification line. · SRF3 brakes now allow Hawk Blue 9012 pads P/N 801993 only; shocks simplified to Penske P/N 280396 sealed assembly only, with optional SCCA Enterprises bump rubber P/N 280407 from 05/01/2020. · P1 Staudacher and Honda K20A-FD2 engine table language cleaned up; no performance changes. · P1 closed cockpit single-seat cars moved from subsection J.5 to subsection B.4; prohibition unchanged. · P1 engine table reference corrected from 'above' to 'below'; ECU throttle wording clarified for dual sensors and fail-safes. · P1 removes redundant TIR inlet restrictor provisions; SIR and flat plate restrictors remain required. · P1 Honda K20A-FD2 CN-spec clarifies allowed parts to OEM list only, no machining. · P1 engine table wording corrected; head designs removed from listed specifications.showhide 2019-07-01 P1 E&O Transmissions #27005wordingwordingP1 allows mechanical and solenoid shifters, prohibits electronic controls and pre-selected changes. 2019-07-01 P1 Move minimum height provision to #27031wordingwordingP1 bodywork minimum height provision moved to aerodynamic section; 115cm height limit for aero parts added. 2019-07-01 P1 Remove duplicative fender louver provision #27033wordingwordingP1 clarifies fender louver and brake duct rules, consolidating duplicative provisions in GCR 9.1.8.C. 2019-07-01 SRF3 SRF Dash Windscreen Kit #27028wordingwordingSRF drivers may now use Dash Windscreen Kit P/N 1180103 or P/N 180102. 2019-05-31 P1 Missing word E&O #26919wordingwordingP1 anti-intrusion panels now allowed anywhere on chassis sides, previously restricted. 2019-05-31 P1 E&O correction to GCR 9.1.8.C.C. #26927wordingwordingP1 bodywork wording corrected: 'a passenger' becomes 'passenger' in three GCR sections. 2019-05-31 SRF3 New SRF Sectional Nose Rule Addition #26914wordingwordingSRF3 nose assembly must use approved multi-piece design; no modifications allowed except as specified. 2019-05-01 P1 Clean up reference to engine table #26648wordingwordingP1 Engine Table reference cleaned up; no performance change. 2019-05-01 P1 Remove redundant spec line #26692removedremovedP1 Mazda Renesis Rotary removed from Engine Table specification line. 2019-05-01 SRF3 SRF Brakes and Shock Rule Changes #26629wordingwordingSRF3 brakes now allow Hawk Blue 9012 pads P/N 801993 only; shocks simplified to Penske P/N 280396 sealed assembly only, with optional SCCA Enterprises bump rubber P/N 280407 from 05/01/2020. 2019-04-01 P1 Clean Up Engine Table Language #26590wordingwordingP1 Staudacher and Honda K20A-FD2 engine table language cleaned up; no performance changes. 2019-03-01 P1 Move single-seat closed cockpit provision to #26376wordingwordingP1 closed cockpit single-seat cars moved from subsection J.5 to subsection B.4; prohibition unchanged. 2019-02-01 P1 Correct errors in GCR section 9.1.8.C.J #26144wordingwordingP1 engine table reference corrected from 'above' to 'below'; ECU throttle wording clarified for dual sensors and fail-safes. 2019-01-01 P1 Remove redundant inlet restrictor provisions #25877wordingwordingP1 removes redundant TIR inlet restrictor provisions; SIR and flat plate restrictors remain required. 2019-01-01 P1 Clarify Honda K20A-FD2 parts requirement #25949wordingwordingP1 Honda K20A-FD2 CN-spec clarifies allowed parts to OEM list only, no machining. 2019-01-01 P1 Correct GCR section 9.1.8.C.J errors #25966wordingwordingP1 engine table wording corrected; head designs removed from listed specifications.

Best is the class's fastest lap in that event's qualifying or race sessions, with the driver who set it, how many cars set a time that session and how close the top five were; a best from fewer than three cars is greyed. With two or more classes, "vs" is the gap of each class's best to the first class's at the same event. "% of P1" is the class's best as a share of P1's best at the same event (100% is level, less is quicker): weather and track condition move every class together, so this compares across years where the raw times do not. It still breaks when P1's own field changes or one session was wet and another dry. Newest event first. The coloured figure under each value is the change from the previous event that has one (green is quicker, red slower). Whole laps only, so events with different sector layouts still compare. Weather and track condition are not accounted for.