BoP Labbeta

BoP Lab / Laguna Seca

P1 vs SM vs SRF3 vs EP pace at Laguna Seca

Class · click a class to switch, + to compare alongside (up to 4: remove one to add another)
Reference class · the others' laps as a share of this one's at the same event, so years compare despite weather; + a class above to measure against it

Quickest here: P1 1:21.626 Jim Devenport, Super Tour Jul 2019 qualifying · SM 1:46.110 Tristan Littlehale, Super Tour Jul 2019 race · SRF3 1:37.644 TJ Acker, Super Tour Jul 2019 qualifying · EP 1:38.804 Glen McCready, Super Tour Jul 2019 race

EventP1SMSRF3EP
Qual bestRace bestTrapQual bestRace bestTrapvs P1% of P1Qual bestRace bestTrapvs P1% of P1Qual bestRace bestTrapvs P1% of P1
Super Tour Jul 2019 ST19JUL262019-07-261:21.626Jim Devenport · fastest of 6 · top 5 within 5.2s1:21.922Todd Slusher · fastest of 6 · top 5 within 4.1s121.3John Manfroy1:46.159Tristan Littlehale · fastest of 11 · top 5 within 1.9s1:46.110Tristan Littlehale · fastest of 11 · top 5 within 1.2s87.0Justin Casey+24.188squal +24.533s129.5%qual 130.1%1:37.644TJ Acker · fastest of 25 · top 5 within 0.8s1:38.588Steve Fogg · fastest of 25 · top 5 within 0.7s99.9Mike Miserendino+16.666squal +16.018s120.3%qual 119.6%1:39.764Glen McCready · fastest of 5 · top 5 within 9.4s1:38.804Glen McCready · fastest of 6 · top 5 within 7.7s102.3Aaron Downey+16.882squal +18.138s120.6%qual 122.2%
24 earlier rule changes on record, in force before Super Tour Jul 2019 (from 2019)3 aero · 1 cars added · 1 engine · 1 weight · 14 wording · 4 other · P1 permits mechanical, solenoid, and air-shifters; prohibits electronic pre-selection and multi-wheel power. · P1 minimum bodywork height rule moved and restated with new 115cm aerodynamic part height limit. · P1 consolidates fender louver rules into one section; removes duplicate allowance for louvers and clarifies brake and engine air ducts are permitted. · SRF drivers may now use Dash Windscreen Kit P/N 1180103 or P/N 180102. · P1 anti-intrusion panels now allowed anywhere on chassis sides instead of specified locations. · P1 bodywork wording clarified: comfort and safety for driver and passenger or driver only. · SRF3 multi-piece nose assembly approved for use; no other nose modifications allowed. · EP Mazda RX-8 firewall may be modified for 13B engine fitment and must be sealed. · P1 Engine Table reference cleaned up; no performance change. · P1 Mazda Renesis Rotary engine spec line removed from Engine Table. · SRF3 brakes now accept Hawk Blue 9012 pads P/N 801993 only; Wilwood vented rotor P/N 800065 minimum 13.25mm as delivered; caliper bushings P/N 1196185 A or B permitted. Shock absorbers: Penske P/N 280396 only, sealed, with SCCA bump rubber… · EP, FP, HP: clarified that tapered holes in ball joints can be reamed for bolt conversion, and wheel bearings and hubs unrestricted on all axles. · EP open cars may now use aftermarket hardtops if OEM-appearance and non-carbon-fiber; specific model allowances removed as redundant. · P1 Staudacher and Honda K20A-FD2 engine table wording clarified; no performance change. · EP Mazda RX-7 12A and 13B (79-85) lose up to 75 lbs; 13B (86-91) loses up to 79 lbs across three weight classes. · P1 closed cockpit single-seat cars remain prohibited; rule moved from subsection J.5 to B.4. · SM fuel pump and filter now permitted as Mazda or OEM equivalent part. · P1 engine table reference corrected from 'above' to 'below'; ETC/FBW/DBW throttle wording clarified on sensor and fail-safe requirements. · SM allows factory Mazda ECU and injector harnesses (P/N 0000-10-020E-99, 0000-10-080D-99) on 1999–2000 model year cars, unmodified. · SM electrical rules reorganized and clarified; alternator now externally regulated only by OEM ECU or master kill switch; harness repair by splicing permitted. · SM tire tread protrusion language removed from GCR 9.1.7.C.5. · P1 removes TIR inlet restrictor option; deletes requirement for single turbo/supercharger unit with single restrictor. · P1 CN-spec Honda K20A-FD2 clarified: stock OEM parts required, no machining allowed. · P1 engine rules correct grammar and remove head designs from specification table.showhide
  • P1 E&O Transmissions #27005otheraddedP1 permits mechanical, solenoid, and air-shifters; prohibits electronic pre-selection and multi-wheel power.
  • P1 Move minimum height provision to #27031wordingwordingP1 minimum bodywork height rule moved and restated with new 115cm aerodynamic part height limit.
  • P1 Remove duplicative fender louver provision #27033wordingwordingP1 consolidates fender louver rules into one section; removes duplicate allowance for louvers and clarifies brake and engine air ducts are permitted.
  • SRF3 SRF Dash Windscreen Kit #27028aeroadded · aeroSRF drivers may now use Dash Windscreen Kit P/N 1180103 or P/N 180102.
  • P1 Missing word E&O #26919wordingwordingP1 anti-intrusion panels now allowed anywhere on chassis sides instead of specified locations.
  • P1 E&O correction to GCR 9.1.8.C.C. #26927wordingwordingP1 bodywork wording clarified: comfort and safety for driver and passenger or driver only.
  • SRF3 New SRF Sectional Nose Rule Addition #26914aeroadded · aeroSRF3 multi-piece nose assembly approved for use; no other nose modifications allowed.
  • EP Allow Firewall Modification for Fitment of 13B into RX8 #26726engineadded · engineEP Mazda RX-8 firewall may be modified for 13B engine fitment and must be sealed.
  • P1 Clean up reference to engine table #26648wordingwordingP1 Engine Table reference cleaned up; no performance change.
  • P1 Remove redundant spec line #26692cars addedremoved · cars addedP1 Mazda Renesis Rotary engine spec line removed from Engine Table.
  • SRF3 SRF Brakes and Shock Rule Changes #26629otherotherSRF3 brakes now accept Hawk Blue 9012 pads P/N 801993 only; Wilwood vented rotor P/N 800065 minimum 13.25mm as delivered; caliper bushings P/N 1196185 A or B permitted. Shock absorbers: Penske P/N 280396 only, sealed, with SCCA bump rubber…
  • EP Rollcenter Correction Clarification #25873wordingaddedEP, FP, HP: clarified that tapered holes in ball joints can be reamed for bolt conversion, and wheel bearings and hubs unrestricted on all axles.
  • EP Hardtops #26476aeroadded · aeroEP open cars may now use aftermarket hardtops if OEM-appearance and non-carbon-fiber; specific model allowances removed as redundant.
  • P1 Clean Up Engine Table Language #26590wordingwordingP1 Staudacher and Honda K20A-FD2 engine table wording clarified; no performance change.
  • EP Request for Competition Adjustment for 2nd Generation RX7 #25935weight -50 lbsfaster · weightEP Mazda RX-7 12A and 13B (79-85) lose up to 75 lbs; 13B (86-91) loses up to 79 lbs across three weight classes.
  • P1 Move single-seat closed cockpit provision to #26376wordingwordingP1 closed cockpit single-seat cars remain prohibited; rule moved from subsection J.5 to B.4.
  • SM Request to allow aftermarket fuel filters. #26370otheraddedSM fuel pump and filter now permitted as Mazda or OEM equivalent part.
  • P1 Correct errors in GCR section 9.1.8.C.J #26144wordingwordingP1 engine table reference corrected from 'above' to 'below'; ETC/FBW/DBW throttle wording clarified on sensor and fail-safe requirements.
  • SM Request 99-00 replacement Wire harnesses #25602otheraddedSM allows factory Mazda ECU and injector harnesses (P/N 0000-10-020E-99, 0000-10-080D-99) on 1999–2000 model year cars, unmodified.
  • SM Organize and Clarify 9.1.7.C.1.o. #25913wordingwordingSM electrical rules reorganized and clarified; alternator now externally regulated only by OEM ECU or master kill switch; harness repair by splicing permitted.
  • SM Strike Tire Tread Language #26123wordingremovedSM tire tread protrusion language removed from GCR 9.1.7.C.5.
  • P1 Remove redundant inlet restrictor provisions #25877wordingwordingP1 removes TIR inlet restrictor option; deletes requirement for single turbo/supercharger unit with single restrictor.
  • P1 Clarify Honda K20A-FD2 parts requirement #25949wordingwordingP1 CN-spec Honda K20A-FD2 clarified: stock OEM parts required, no machining allowed.
  • P1 Correct GCR section 9.1.8.C.J errors #25966wordingwordingP1 engine rules correct grammar and remove head designs from specification table.
About this data
Best is the class's fastest lap in that event's qualifying or race sessions, with the driver who set it, how many cars set a time that session and how close the top five were; a best from fewer than three cars is greyed. With two or more classes, "vs" is the gap of each class's best to the first class's at the same event. "% of P1" is the class's best as a share of P1's best at the same event (100% is level, less is quicker): weather and track condition move every class together, so this compares across years where the raw times do not. It still breaks when P1's own field changes or one session was wet and another dry. Newest event first. The coloured figure under each value is the change from the previous event that has one (green is quicker, red slower). Whole laps only, so events with different sector layouts still compare. Weather and track condition are not accounted for.