BoP Labbeta

BoP Lab / Laguna Seca

P1 vs AS vs FB vs FP pace at Laguna Seca

Class · click a class to switch, + to compare alongside (up to 4: remove one to add another)
vsAS×B-SpecEPFAvsFB×FCFE2FFvsFP×FVGT1GT2HPP1×P2SMSRF3STLSTUT1T2T3T4Show 5 inactive classes
Reference class · the others' laps as a share of this one's at the same event, so years compare despite weather; + a class above to measure against it

Quickest here: P1 1:21.626 Jim Devenport, Super Tour Jul 2019 qualifying · AS 1:40.712 Clark Nunes, Super Tour Jul 2019 qualifying · FB 1:24.666 Jake Latham, Super Tour Jul 2019 qualifying · FP 1:41.237 Joe Huffaker, Super Tour Jul 2019 qualifying

EventP1ASFBFP
Qual bestRace bestTrapQual bestRace bestTrapvs P1% of P1Qual bestRace bestTrapvs P1% of P1Qual bestRace bestTrapvs P1% of P1
Super Tour Jul 2019 ST19JUL262019-07-261:21.626Jim Devenport · fastest of 6 · top 5 within 5.2s1:21.922Todd Slusher · fastest of 6 · top 5 within 4.1s121.3John Manfroy1:40.712Clark Nunes · fastest of 4 · top 4 within 7.9s1:40.914Clark Nunes · fastest of 4 · top 4 within 8.0s103.0Michael Thompson+18.992squal +19.086s123.2%qual 123.4%1:24.666Jake Latham · only car1:25.752Jake Latham · only car116.0Jake Latham+3.830squal +3.040s104.7%qual 103.7%1:41.237Joe Huffaker · fastest of 21:42.737Joe Huffaker · only car97.0Joe Huffaker+20.815squal +19.611s125.4%qual 124.0%
18 earlier rule changes on record, in force before Super Tour Jul 2019 (from 2019)2 cars added · 2 weight · 1 aero · 12 wording · 1 other · P1 permits mechanical, solenoid, and air-shifters; prohibits electronic pre-selection and multi-wheel power. · P1 minimum bodywork height rule moved and restated with new 115cm aerodynamic part height limit. · P1 consolidates fender louver rules into one section; removes duplicate allowance for louvers and clarifies brake and engine air ducts are permitted. · AS Ford Mustang 79-93 non-Cobra drops 100 lbs to 3150; over 313 CID Cobra drops 100 lbs to 3450. · P1 anti-intrusion panels now allowed anywhere on chassis sides instead of specified locations. · P1 bodywork wording clarified: comfort and safety for driver and passenger or driver only. · P1 Engine Table reference cleaned up; no performance change. · P1 Mazda Renesis Rotary engine spec line removed from Engine Table. · EP, FP, HP: clarified that tapered holes in ball joints can be reamed for bolt conversion, and wheel bearings and hubs unrestricted on all axles. · EP open cars may now use aftermarket hardtops if OEM-appearance and non-carbon-fiber; specific model allowances removed as redundant. · P1 Staudacher and Honda K20A-FD2 engine table wording clarified; no performance change. · FP Dodge Daytona/Chrysler Laser 84-85 added at 2100 lbs; Shelby Charger/Omni 024 83-84 weight cut to 2100 lbs. · P1 closed cockpit single-seat cars remain prohibited; rule moved from subsection J.5 to B.4. · AS adds Spec Mustang SMG classification with 107.1 wheelbase, 3.73 gears, 355mm front and 300mm rear brakes. · P1 engine table reference corrected from 'above' to 'below'; ETC/FBW/DBW throttle wording clarified on sensor and fail-safe requirements. · P1 removes TIR inlet restrictor option; deletes requirement for single turbo/supercharger unit with single restrictor. · P1 CN-spec Honda K20A-FD2 clarified: stock OEM parts required, no machining allowed. · P1 engine rules correct grammar and remove head designs from specification table.showhide
  • P1 E&O Transmissions #27005otheraddedP1 permits mechanical, solenoid, and air-shifters; prohibits electronic pre-selection and multi-wheel power.
  • P1 Move minimum height provision to #27031wordingwordingP1 minimum bodywork height rule moved and restated with new 115cm aerodynamic part height limit.
  • P1 Remove duplicative fender louver provision #27033wordingwordingP1 consolidates fender louver rules into one section; removes duplicate allowance for louvers and clarifies brake and engine air ducts are permitted.
  • AS Request to Revert to 2017 Weights #25885weightfaster · weightAS Ford Mustang 79-93 non-Cobra drops 100 lbs to 3150; over 313 CID Cobra drops 100 lbs to 3450.
  • P1 Missing word E&O #26919wordingwordingP1 anti-intrusion panels now allowed anywhere on chassis sides instead of specified locations.
  • P1 E&O correction to GCR 9.1.8.C.C. #26927wordingwordingP1 bodywork wording clarified: comfort and safety for driver and passenger or driver only.
  • P1 Clean up reference to engine table #26648wordingwordingP1 Engine Table reference cleaned up; no performance change.
  • P1 Remove redundant spec line #26692cars addedremoved · cars addedP1 Mazda Renesis Rotary engine spec line removed from Engine Table.
  • FP Rollcenter Correction Clarification #25873wordingaddedEP, FP, HP: clarified that tapered holes in ball joints can be reamed for bolt conversion, and wheel bearings and hubs unrestricted on all axles.
  • FP Hardtops #26476aeroadded · aeroEP open cars may now use aftermarket hardtops if OEM-appearance and non-carbon-fiber; specific model allowances removed as redundant.
  • P1 Clean Up Engine Table Language #26590wordingwordingP1 Staudacher and Honda K20A-FD2 engine table wording clarified; no performance change.
  • FP Request Classification of Dodge Daytona in F Production #26259weight -150 lbsfaster · weightFP Dodge Daytona/Chrysler Laser 84-85 added at 2100 lbs; Shelby Charger/Omni 024 83-84 weight cut to 2100 lbs.
  • P1 Move single-seat closed cockpit provision to #26376wordingwordingP1 closed cockpit single-seat cars remain prohibited; rule moved from subsection J.5 to B.4.
  • AS SMG Mustang eligibility in American sedan #26224cars addedaddedAS adds Spec Mustang SMG classification with 107.1 wheelbase, 3.73 gears, 355mm front and 300mm rear brakes.
  • P1 Correct errors in GCR section 9.1.8.C.J #26144wordingwordingP1 engine table reference corrected from 'above' to 'below'; ETC/FBW/DBW throttle wording clarified on sensor and fail-safe requirements.
  • P1 Remove redundant inlet restrictor provisions #25877wordingwordingP1 removes TIR inlet restrictor option; deletes requirement for single turbo/supercharger unit with single restrictor.
  • P1 Clarify Honda K20A-FD2 parts requirement #25949wordingwordingP1 CN-spec Honda K20A-FD2 clarified: stock OEM parts required, no machining allowed.
  • P1 Correct GCR section 9.1.8.C.J errors #25966wordingwordingP1 engine rules correct grammar and remove head designs from specification table.
About this data
Best is the class's fastest lap in that event's qualifying or race sessions, with the driver who set it, how many cars set a time that session and how close the top five were; a best from fewer than three cars is greyed. With two or more classes, "vs" is the gap of each class's best to the first class's at the same event. "% of P1" is the class's best as a share of P1's best at the same event (100% is level, less is quicker): weather and track condition move every class together, so this compares across years where the raw times do not. It still breaks when P1's own field changes or one session was wet and another dry. Newest event first. The coloured figure under each value is the change from the previous event that has one (green is quicker, red slower). Whole laps only, so events with different sector layouts still compare. Weather and track condition are not accounted for.