BoP Labbeta

BoP Lab / Laguna Seca

FF vs P1 vs FM vs AS pace at Laguna Seca

Class · click a class to switch, + to compare alongside (up to 4: remove one to add another)
Reference class · the yardstick the % column and chart are measured against

Quickest here: FF 1:34.290 Chuck Horn, Super Tour Jul 2019 qualifying · P1 1:21.626 Jim Devenport, Super Tour Jul 2019 qualifying · FM 1:31.060 Bill Weaver, Super Tour Jul 2019 qualifying · AS 1:40.712 Clark Nunes, Super Tour Jul 2019 qualifying

EventFFP1FMAS
Qual bestRace bestTrapQual bestRace bestTrapvs FF% of FFQual bestRace bestTrapvs FF% of FFQual bestRace bestTrapvs FF% of FF
Super Tour Jul 2019 ST19JUL262019-07-261:34.290Chuck Horn · fastest of 7 · top 5 within 1.8s1:35.120Courtney Crone · fastest of 7 · top 5 within 1.6s104.0Chuck Horn1:21.626Jim Devenport · fastest of 6 · top 5 within 5.2s1:21.922Todd Slusher · fastest of 6 · top 5 within 4.1s121.3John Manfroy-13.198squal -12.664s86.1%qual 86.6%1:31.060Bill Weaver · fastest of 7 · top 5 within 3.0s1:32.101Bill Weaver · fastest of 7 · top 5 within 1.0s109.0Randy Sturgeon-3.019squal -3.230s96.8%qual 96.6%1:40.712Clark Nunes · fastest of 4 · top 4 within 7.9s1:40.914Clark Nunes · fastest of 4 · top 4 within 8.0s103.0Michael Thompson+5.794squal +6.422s106.1%qual 106.8%
18 earlier rule changes on record, in force before Super Tour Jul 2019 (from 2019)2 cars added · 1 aero · 1 engine · 1 weight · 12 wording · 1 other · P1 permits mechanical, solenoid, and air-shifters; prohibits electronic pre-selection and multi-wheel power. · P1 minimum bodywork height rule moved and restated with new 115cm aerodynamic part height limit. · P1 consolidates fender louver rules into one section; removes duplicate allowance for louvers and clarifies brake and engine air ducts are permitted. · AS Ford Mustang 79-93 non-Cobra drops 100 lbs to 3150; over 313 CID Cobra drops 100 lbs to 3450. · P1 anti-intrusion panels now allowed anywhere on chassis sides instead of specified locations. · P1 bodywork wording clarified: comfort and safety for driver and passenger or driver only. · P1 Engine Table reference cleaned up; no performance change. · P1 Mazda Renesis Rotary engine spec line removed from Engine Table. · P1 Staudacher and Honda K20A-FD2 engine table wording clarified; no performance change. · P1 closed cockpit single-seat cars remain prohibited; rule moved from subsection J.5 to B.4. · AS adds Spec Mustang SMG classification with 107.1 wheelbase, 3.73 gears, 355mm front and 300mm rear brakes. · FF Honda Fit cylinder honing increased to 73.315mm and oversize pistons PN 13020-RB7-Z00 now permitted with matching ring packs. · FF intake manifold thermal wrap now permitted if easily removable for inspection; no coating allowed. · FF clarifies coolant and oil catch tank capacity requirements: coolant minimum one U.S. pint, oil minimum one U.S. quart per system. · P1 engine table reference corrected from 'above' to 'below'; ETC/FBW/DBW throttle wording clarified on sensor and fail-safe requirements. · P1 removes TIR inlet restrictor option; deletes requirement for single turbo/supercharger unit with single restrictor. · P1 CN-spec Honda K20A-FD2 clarified: stock OEM parts required, no machining allowed. · P1 engine rules correct grammar and remove head designs from specification table.showhide
  • P1 E&O Transmissions #27005otheraddedP1 permits mechanical, solenoid, and air-shifters; prohibits electronic pre-selection and multi-wheel power.
  • P1 Move minimum height provision to #27031wordingwordingP1 minimum bodywork height rule moved and restated with new 115cm aerodynamic part height limit.
  • P1 Remove duplicative fender louver provision #27033wordingwordingP1 consolidates fender louver rules into one section; removes duplicate allowance for louvers and clarifies brake and engine air ducts are permitted.
  • AS Request to Revert to 2017 Weights #25885weightfaster · weightAS Ford Mustang 79-93 non-Cobra drops 100 lbs to 3150; over 313 CID Cobra drops 100 lbs to 3450.
  • P1 Missing word E&O #26919wordingwordingP1 anti-intrusion panels now allowed anywhere on chassis sides instead of specified locations.
  • P1 E&O correction to GCR 9.1.8.C.C. #26927wordingwordingP1 bodywork wording clarified: comfort and safety for driver and passenger or driver only.
  • P1 Clean up reference to engine table #26648wordingwordingP1 Engine Table reference cleaned up; no performance change.
  • P1 Remove redundant spec line #26692cars addedremoved · cars addedP1 Mazda Renesis Rotary engine spec line removed from Engine Table.
  • P1 Clean Up Engine Table Language #26590wordingwordingP1 Staudacher and Honda K20A-FD2 engine table wording clarified; no performance change.
  • P1 Move single-seat closed cockpit provision to #26376wordingwordingP1 closed cockpit single-seat cars remain prohibited; rule moved from subsection J.5 to B.4.
  • AS SMG Mustang eligibility in American sedan #26224cars addedaddedAS adds Spec Mustang SMG classification with 107.1 wheelbase, 3.73 gears, 355mm front and 300mm rear brakes.
  • FF Request for Oversize Honda Fit Pistons #25810enginefaster · engineFF Honda Fit cylinder honing increased to 73.315mm and oversize pistons PN 13020-RB7-Z00 now permitted with matching ring packs.
  • FF Heat Shield - Fit Intake #26102aeroadded · aeroFF intake manifold thermal wrap now permitted if easily removable for inspection; no coating allowed.
  • FF Request catch cans/tanks clarification #26158wordingwordingFF clarifies coolant and oil catch tank capacity requirements: coolant minimum one U.S. pint, oil minimum one U.S. quart per system.
  • P1 Correct errors in GCR section 9.1.8.C.J #26144wordingwordingP1 engine table reference corrected from 'above' to 'below'; ETC/FBW/DBW throttle wording clarified on sensor and fail-safe requirements.
  • P1 Remove redundant inlet restrictor provisions #25877wordingwordingP1 removes TIR inlet restrictor option; deletes requirement for single turbo/supercharger unit with single restrictor.
  • P1 Clarify Honda K20A-FD2 parts requirement #25949wordingwordingP1 CN-spec Honda K20A-FD2 clarified: stock OEM parts required, no machining allowed.
  • P1 Correct GCR section 9.1.8.C.J errors #25966wordingwordingP1 engine rules correct grammar and remove head designs from specification table.
About this data
Best is the class's fastest lap in that event's qualifying or race sessions, with the driver who set it, how many cars set a time that session and how close the top five were; a best from fewer than three cars is greyed. With two or more classes, "vs" is the gap of each class's best to the first class's at the same event. "% of FF" is the class's best as a share of FF's best at the same event (100% is level, less is quicker): weather and track condition move every class together, so this compares across years where the raw times do not. It still breaks when FF's own field changes or one session was wet and another dry. Newest event first. The coloured figure under each value is the change from the previous event that has one (green is quicker, red slower). Whole laps only, so events with different sector layouts still compare. Weather and track condition are not accounted for.