SRF3 Driver Safety & Comfort #37966wordingwordingSRF drivers with disabilities may modify seat and controls for safety and comfort with approval and logbook notation.
Atlanta Region SCCA Hoosier Super Tour @ Michelin Raceway Road Atlanta ST25MAR072025-03-07
1:33.603Peyton Long · fastest of 40 · top 5 within 0.5s-0.354s (-0.38%)
1:33.785Richard Baldwin · fastest of 40 · top 5 within 0.1s-0.388s (-0.41%)
122.4Arvid Albanese+0.2 mph (+0.1%)
10 rule changes (FE: 4, SRF3: 6)1 suspension & brakes · 1 tyres & wheels · 1 weight · 7 wording · FE must use SCCA Enterprises Part # WM803010 brake line to control arm covers as delivered, secured with zip ties or tape. · SRF3 air filter rule removes K&N RC-9160 option, leaving only P/N WM301020 allowed. · SRF brake rotor minimum thickness increases from 12.20mm to 13.25mm, Wilwood vented rotor P/N 800065. · SRF3 Hoosier logo placement changes from four decals to three decals in different locations. · FE and SRF protest fee structure removed, now references GCR section 8.3.1.D for fees and payment procedure. · FE Hoosier contingency decal requirement reduced from five to three decals with simplified placement rules. · SRF Hoosier decal requirement reduced from four decals in specific locations to three decals with simpler placement rules. · FE requires five Hoosier decals in specified locations: one small on nose or front shock cover, two 12" on front wing plates, two 12" on lower floor panels. · SRF wet tires: P185/60R13 H20/W2 option removed; P185/65R13 W2 front now required with P205/60R13 W2 rear. · SRF3 alternator pulley minimum weight reduced from 12 oz to 11 oz.showhide
FE Brake Line to A-Arm Covers #37110wordingwordingFE must use SCCA Enterprises Part # WM803010 brake line to control arm covers as delivered, secured with zip ties or tape.
SRF3 Update SRF3 Air Filter Rule #36681wordingunclearSRF3 air filter rule removes K&N RC-9160 option, leaving only P/N WM301020 allowed.
SRF3 Hoosier Tire Decal Placement #36739wordingwordingSRF3 Hoosier logo placement changes from four decals to three decals in different locations.
FE Protest Fee Clarification #36540wordingwordingFE and SRF protest fee structure removed, now references GCR section 8.3.1.D for fees and payment procedure.
FE Update on Letter 36620 with new Hoosier Contingency Decal Info #36625wordingwordingFE Hoosier contingency decal requirement reduced from five to three decals with simplified placement rules.
SRF3 Update to Letter 36619 with new Hoosier Contingency Decal Info #36624wordingwordingSRF Hoosier decal requirement reduced from four decals in specific locations to three decals with simpler placement rules.
FE Hoosier Tire Decal Placement #36435wordingwordingFE requires five Hoosier decals in specified locations: one small on nose or front shock cover, two 12" on front wing plates, two 12" on lower floor panels.
SRF3 Update Rain Tire Rule and Hoosier Decal Placement #36436tyres & wheelsslowerSRF wet tires: P185/60R13 H20/W2 option removed; P185/65R13 W2 front now required with P205/60R13 W2 rear.
SRF3 SRF3 Alternator Pulley Update In #36095weightfasterSRF3 alternator pulley minimum weight reduced from 12 oz to 11 oz.
Atlanta Region Hoosier SCCA Super Tour @ Michelin Raceway Road Atlanta ST24MAR082024-03-08
1:33.957Grant Vogel · fastest of 40 · top 5 within 0.4s-0.238s (-0.25%)
1:34.173Thomas Weir · fastest of 43 · top 5 within 0.5s-0.312s (-0.33%)
122.2Robeson Clay Russell-6.6 mph (-5.1%)
9 rule changes (FE: 3, SRF3: 6)2 tyres & wheels · 6 wording · 1 other · FE rain light must meet FIA Standard 8874-2019, Technical List No. 76, effective 1/1/2024. · FE allows racer's tape for crash damage and fastener securing, prohibits body seam taping, permits heat exchanger taping only. · SRF rain/brake light now requires Super Bright LEDs Inc. P/N PT-STRB-R24 with specific connector and rain light switch. · SRF requires Super Bright LEDs P/N PT-STRB-R24 rain/brake light with strobing capability and specific wiring. · SRF adds brake duct and pedal extension rules, rear shift cable clamp option, camber limit to 5.0°, radiator opening height 3.5" ±0.5", and P2 engine restrictor changes. · SRF radiator rule clarified: P/N 480466 replaceable with Automotive P/N 1R698, CU698 or manufacturer equivalent with documentation. · SRF Hoosier wet front tire updated to P/N 46100 P185/60R13 H20 or W2. · SRF Hoosier front rain tyre part number changes from 46100 to 46101 P185/65R13 W2. · FE SADEV transmission ratios removed from review notice prior to sealing date.showhide
FE Update FE Rain Light Rule #34707wordingwordingFE rain light must meet FIA Standard 8874-2019, Technical List No. 76, effective 1/1/2024.
FE FE/FE2 rule update #35269wordingwordingFE allows racer's tape for crash damage and fastener securing, prohibits body seam taping, permits heat exchanger taping only.
SRF3 Update SRF Rain / Brake Rule #34706wordingwordingSRF rain/brake light now requires Super Bright LEDs Inc. P/N PT-STRB-R24 with specific connector and rain light switch.
SRF3 Update SRF Brake Light Rule v1 #34853wordingwordingSRF requires Super Bright LEDs P/N PT-STRB-R24 rain/brake light with strobing capability and specific wiring.
SRF3 SRF Radiator Rule Update #34805wordingwordingSRF radiator rule clarified: P/N 480466 replaceable with Automotive P/N 1R698, CU698 or manufacturer equivalent with documentation.
SRF3 Hoosier SRF Wet Front Tire Rule Update #34189tyres & wheelsunclearSRF Hoosier wet front tire updated to P/N 46100 P185/60R13 H20 or W2.
SRF3 Update SRF Front W2 Rain Tire Part Number #34118tyres & wheelstyres & wheelsSRF Hoosier front rain tyre part number changes from 46100 to 46101 P185/65R13 W2.
FE Update FE SADEV Transmission Rule #33883wordingwordingFE SADEV transmission ratios removed from review notice prior to sealing date.
Atlanta Region Hoosier SCCA Super Tour @ Michelin Raceway Road Atlanta ST23MAR102023-03-10
1:34.195Charles Russell Turner · fastest of 36 · top 5 within 0.9s+0.060s (+0.06%)
1:34.485Mark Eaton · fastest of 36 · top 5 within 0.3s+0.699s (+0.75%)
128.8Derek Schofield-2.7 mph (-2.1%)
9 rule changes (FE: 5, SRF3: 4)2 suspension & brakes · 1 tyres & wheels · 6 wording · SRF Renault Alliance solid front rotors banned; restrictor reduced 35mm to 34mm for 2011+ Kawasaki; minimum weight increased to 1100 lbs for 2009+ stock engines. · SRF3 tail sections allowed on SRFs with GEN3 airbox shimming up to 19 mm; alternate dash panel P/N 180100 or 180101 relocated in rules. · FE drivers may now adjust manual brake bias during racing. · FE front and rear wing assembly mounting and adjustment rules clarified; Gurney flap specifications and attachment methods detailed. · FE engine heat shield and insulation material now permitted to protect fuel cell, filter, rail, and lines. · FE tires must be run as delivered in sets of 4. · FE master cylinder specifications clarified: Girling front .700" piston WM802005, rear .750" WM802006. · SRF tire rule wording changed from 'Tires: must be run as delivered' to 'Tires must be run as delivered.' · SRF brake rotor minimum thickness reduced from 13.25 to 12.20mm; seal and air filter rules clarified.showhide
SRF3 Update SRF Brake Rule #33469suspension & brakesslowerSRF Renault Alliance solid front rotors banned; restrictor reduced 35mm to 34mm for 2011+ Kawasaki; minimum weight increased to 1100 lbs for 2009+ stock engines.
SRF3 Update SRF Bodywork Fitment Rule #33765wordingwordingSRF3 tail sections allowed on SRFs with GEN3 airbox shimming up to 19 mm; alternate dash panel P/N 180100 or 180101 relocated in rules.
FE Brake bias adjuster clarification #33084wordingwordingFE drivers may now adjust manual brake bias during racing.
FE FE Front and Rear Wing Update & Clarification #33089wordingwordingFE front and rear wing assembly mounting and adjustment rules clarified; Gurney flap specifications and attachment methods detailed.
FE Engine Heat Shield & Insulation #33019wordingwordingFE engine heat shield and insulation material now permitted to protect fuel cell, filter, rail, and lines.
FE Update FE/FE2 Tire Rule #32613tyres & wheelstyres & wheelsFE tires must be run as delivered in sets of 4.
FE Master cylinder clarification #32669wordingwordingFE master cylinder specifications clarified: Girling front .700" piston WM802005, rear .750" WM802006.
SRF3 SRF Tire Rule Update #32614wordingwordingSRF tire rule wording changed from 'Tires: must be run as delivered' to 'Tires must be run as delivered.'
SRF3 Brake, seal, and air filter clarifications #32670suspension & brakesfasterSRF brake rotor minimum thickness reduced from 13.25 to 12.20mm; seal and air filter rules clarified.
Atlanta Region Hoosier SCCA Super Tour @ Michelin Raceway Road Atlanta ST22MAR122022-03-12
1:34.135Charles Russell Turner · fastest of 52 · top 5 within 1.2s-0.681s (-0.72%)
1:33.786Matthew Horst · fastest of 50 · top 5 within 0.2s-0.886s (-0.94%)
131.5Peyton Long+4.2 mph (+3.3%)
9 rule changes (FE: 4, SRF3: 5)3 tyres & wheels · 1 cars added · 1 engine · 4 wording · FE2 Enterprise windscreen restricted to P/N WM137000; racer's tape allowed for crash damage repair, body panel securing, but not taping of body seams. · SRF front wet tire changes from P185/60R13 H20 to P185/65R13 W2; SRF3 adds mandatory G301048 restrictor plate Jan. 1, 2022. · SRF wet tyres add Hoosier P185/60R13 W2 front and P205/60R13 W2 rear as alternatives to H20. · SRF adds SADEV-SRF3 6-speed sequential option with final drive 3.20 versus OEM 5-speed 3.85. · SRF seal procedures clarified: unsealed components need CSR inspection and logbook notation instead of engine removal. · FE removes tire marking and qualifying session requirements for wet race starts; rain tire rules simplified. · FE radiator screens clarified: may not protrude more than ¼ inch in front of sidepods. · FE radiator screens allowed and recommended, positioned no more than ¼ inch from sidepod front vertical plane. · SRF3 alternator pulley restricted to P/N G902130 or G902130A, 12oz minimum weight.showhide
FE Two FE2 Rule Updates #31524wordingwordingFE2 Enterprise windscreen restricted to P/N WM137000; racer's tape allowed for crash damage repair, body panel securing, but not taping of body seams.
SRF3 Three Updates to SRF Rules #31523tyres & wheelsunclearSRF front wet tire changes from P185/60R13 H20 to P185/65R13 W2; SRF3 adds mandatory G301048 restrictor plate Jan. 1, 2022.
SRF3 SRF Wet Tires #30849tyres & wheelstyres & wheelsSRF wet tyres add Hoosier P185/60R13 W2 front and P205/60R13 W2 rear as alternatives to H20.
SRF3 SADEV-SRF3 Transmission #30926cars addedunclearSRF adds SADEV-SRF3 6-speed sequential option with final drive 3.20 versus OEM 5-speed 3.85.
SRF3 SRF Update Maintenance, Repairs and Seals #30961wordingwordingSRF seal procedures clarified: unsealed components need CSR inspection and logbook notation instead of engine removal.
FE FE Tire Rule Changes #30754tyres & wheelstyres & wheelsFE removes tire marking and qualifying session requirements for wet race starts; rain tire rules simplified.
FE Radiator Screens Clarification #30792wordingwordingFE radiator screens clarified: may not protrude more than ¼ inch in front of sidepods.
FE FE Radiator Screens #30575wordingwordingFE radiator screens allowed and recommended, positioned no more than ¼ inch from sidepod front vertical plane.
SRF3 SRF3 Alternator Pulley #30684engineslowerSRF3 alternator pulley restricted to P/N G902130 or G902130A, 12oz minimum weight.
Atlanta Region Hoosier SCCA Super Tour @ Michelin Raceway Road Atlanta ST21MAR192021-03-19
1:34.816Brian Schofield · fastest of 77 · top 5 within 0.5s
1:34.672Mark Snyder · fastest of 69 · top 5 within 0.2s
127.3Matthew Horst
23 earlier rule changes on record, in force before Atlanta Region Hoosier SCCA Super Tour @ Michelin Raceway Road Atlanta (from 2019)3 suspension & brakes · 3 tyres & wheels · 2 cars added · 2 weight · 13 wording · SRF and SRF3 mandatory identification simplified: removed Ford Performance and Blue Oval decals, kept Hoosier logo placement. · FE front springs increase to 800 lbs ±25 lbs, rear springs decrease to 900 lbs ±25 lbs, Hypercoil parts required. · SRF shocks, springs, bump stops sealed; rear springs 412-429 lbs/in P/N 280390 only; previous parts no longer allowed. · FE Gurney flap specs clarified: front wing secondary elements limited to .500" ± .030", wing elements to .250" ± .030". · FE Gurney flap wording clarified: permitted on front wing secondary elements only, not main plane. · SRF3 shock absorber brand restriction removed; all shocks must be sealed by Enterprises. · FE spring rule update effective date moved from June 1 to November 1, 2020. · SRF3 bump stop now must be SCCA P/N 280407 only, no modifications, optional, max one per shock. · SRF shock absorber bump stop clarified: only SCCA P/N 280407 allowed as delivered, maximum one per shock, effective 05/01/2020. · FE2 class created for 2.0L MZR engine at 1250 lbs minimum; FE 2.3L becomes Regional only through 2019 Runoffs. · SRF rain and brake rule wording updated; supersedes GCR 9.3.32.B.2 effective 1/1/202 through 12/31/2024. · FE and FE2 minimum weight increased to 1270 lbs including driver; spring options and tire warmer ban added. · SRF bans tire warmers and cooling methods other than natural air convection or conduction. · SRF front nose weight minimum reduced from 35 to 32 lbs. · SRF3 reclassified as Spec Racer Ford 3 with 1.6L conversion; SRF2 becomes Regional Only Class. · FE wet tire rear width increases from 7.5 to 8.0 inches, Hoosier 44196 W3. · FE removes American Racer tires, mandates Hoosier dry 22.0 x 8.0-13 FE front and 22.0 x 10.0-13 FE rear. · SRF drivers may now use Dash Windscreen Kit P/N 1180103 or P/N 180102. · FE anti-roll bars may run disconnected; one link removable front, rear, or both for safety. · FE and FE2 Enterprise bubble tail P/N WM138014 newly allowed for both classes. · SRF3 nose assembly must use approved multi-piece design; no modifications allowed except as specified. · SRF3 brakes now allow Hawk Blue 9012 pads P/N 801993 only; shocks simplified to Penske P/N 280396 sealed assembly only, with optional SCCA Enterprises bump rubber P/N 280407 from 05/01/2020. · FE wet tires updated: front Hoosier 44195 W3 and rear 44217 W3, WET designation removed.showhide
SRF3 Mandatory identification: #30223wordingwordingSRF and SRF3 mandatory identification simplified: removed Ford Performance and Blue Oval decals, kept Hoosier logo placement.
FE FE / FE2 Spring Updates #29689suspension & brakessuspension & brakesFE front springs increase to 800 lbs ±25 lbs, rear springs decrease to 900 lbs ±25 lbs, Hypercoil parts required.
SRF3 SRF Shocks, Springs and Ride Height. #29688suspension & brakessuspension & brakesSRF shocks, springs, bump stops sealed; rear springs 412-429 lbs/in P/N 280390 only; previous parts no longer allowed.
FE FE Gurney Flap Spec Update #29445wordingwordingFE Gurney flap specs clarified: front wing secondary elements limited to .500" ± .030", wing elements to .250" ± .030".
FE FE Gurney flap wicker clarification #28885wordingwordingFE Gurney flap wording clarified: permitted on front wing secondary elements only, not main plane.
SRF3 SRF Shocks #28791wordingwordingSRF3 shock absorber brand restriction removed; all shocks must be sealed by Enterprises.
FE FE spring rule update changed to November 1, 2020 #28814wordingwordingFE spring rule update effective date moved from June 1 to November 1, 2020.
SRF3 Update Bump Stop Rule #28712suspension & brakessuspension & brakesSRF3 bump stop now must be SCCA P/N 280407 only, no modifications, optional, max one per shock.
SRF3 SRF Bump Stop Correction #27019wordingwordingSRF shock absorber bump stop clarified: only SCCA P/N 280407 allowed as delivered, maximum one per shock, effective 05/01/2020.
FE Request for FE / FE2 preparation rules update #27722cars addedcars addedFE2 class created for 2.0L MZR engine at 1250 lbs minimum; FE 2.3L becomes Regional only through 2019 Runoffs.
SRF3 SRF Rain / Brake Rule - BoD approved as follows #34958wordingwordingSRF rain and brake rule wording updated; supersedes GCR 9.3.32.B.2 effective 1/1/202 through 12/31/2024.
FE FE / FE2 Update Rules #27624weightslowerFE and FE2 minimum weight increased to 1270 lbs including driver; spring options and tire warmer ban added.
SRF3 SRF Tire Warmer Rule #27622tyres & wheelsslowerSRF bans tire warmers and cooling methods other than natural air convection or conduction.
SRF3 SRF / SRF3 Nose Weight Reduction #27706weightfasterSRF front nose weight minimum reduced from 35 to 32 lbs.
SRF3 SRF / SRF3 Majors & Regional Class Updates #27723wordingwordingSRF3 reclassified as Spec Racer Ford 3 with 1.6L conversion; SRF2 becomes Regional Only Class.
FE FE Wet Tire E&O #27365tyres & wheelsfasterFE wet tire rear width increases from 7.5 to 8.0 inches, Hoosier 44196 W3.
FE FE Tire Update #27029tyres & wheelsunclearFE removes American Racer tires, mandates Hoosier dry 22.0 x 8.0-13 FE front and 22.0 x 10.0-13 FE rear.
SRF3 SRF Dash Windscreen Kit #27028wordingwordingSRF drivers may now use Dash Windscreen Kit P/N 1180103 or P/N 180102.
FE FE Anti-Roll Bar Clarification #26912wordingwordingFE anti-roll bars may run disconnected; one link removable front, rear, or both for safety.
FE FE / FE2 Updated Bubble Tail Rule #26913cars addedcars addedFE and FE2 Enterprise bubble tail P/N WM138014 newly allowed for both classes.
SRF3 New SRF Sectional Nose Rule Addition #26914wordingwordingSRF3 nose assembly must use approved multi-piece design; no modifications allowed except as specified.
SRF3 SRF Brakes and Shock Rule Changes #26629wordingwordingSRF3 brakes now allow Hawk Blue 9012 pads P/N 801993 only; shocks simplified to Penske P/N 280396 sealed assembly only, with optional SCCA Enterprises bump rubber P/N 280407 from 05/01/2020.
FE Request to Update Hoosier Rain Tire Part Number for the FE cars #26235wordingwordingFE wet tires updated: front Hoosier 44195 W3 and rear 44217 W3, WET designation removed.
Best is the class's fastest lap in that event's qualifying or race sessions, with the driver who set it, how many cars set a time that session and how close the top five were; a best from fewer than three cars is greyed. With two or more classes, "vs" is the gap of each class's best to the first class's at the same event. Newest event first. The coloured figure under each value is the change from the previous event that has one (green is quicker, red slower). Whole laps only, so events with different sector layouts still compare. Weather and track condition are not accounted for.