BoP Labbeta

BoP Lab / Buttonwillow Raceway Park

FE vs FB vs F6 vs P1 pace at Buttonwillow Raceway Park

Class · click a class to switch, + to compare alongside (up to 4: remove one to add another)
Reference class · the others' laps as a share of this one's at the same event, so years compare despite weather; + a class above to measure against it
Track configuration

Quickest here: FE 1:49.749 Jeff Read, Hoosier SCCA Super Tour (Cal Club Region) qualifying · P1 1:34.975 Jim Devenport, Cal Club Region Hoosier SCCA Super Tour @ Buttonwillow Raceway Park qualifying

1:341:361:381:401:421:441:461:481:5017 rule changes between Hoosier SCCA Super Tour (Cal Club Region) and Cal Club Region Hoosier SCCA Super Tour @ Buttonwillow Raceway Park17 ▾FE race best at Hoosier SCCA Super Tour (Cal Club Region): 1:50.132 (Jeff Read)FE qualifying best at Hoosier SCCA Super Tour (Cal Club Region): 1:49.749 (Jeff Read)P1 race best at Hoosier SCCA Super Tour (Cal Club Region): 1:38.856 (Jim Devenport)P1 race best at Cal Club Region Hoosier SCCA Super Tour @ Buttonwillow Raceway Park: 1:36.224 (Jim Devenport)P1 qualifying best at Hoosier SCCA Super Tour (Cal Club Region): 1:37.658 (Jim Devenport)P1 qualifying best at Cal Club Region Hoosier SCCA Super Tour @ Buttonwillow Raceway Park: 1:34.975 (Jim Devenport)Hoosier SCCA Super Tour (Cal Club Region)2019Cal Club Region Hoosier SCCA Super Tour @ Buttonwillow Raceway Park2020
FEFBF6P1solid race · dashed qualifying · slower is lower
88%90%92%94%96%98%100%17 rule changes between Hoosier SCCA Super Tour (Cal Club Region) and Cal Club Region Hoosier SCCA Super Tour @ Buttonwillow Raceway Park17 ▾FE race best at Hoosier SCCA Super Tour (Cal Club Region): 100.0% of FE's (Jeff Read)FE qualifying best at Hoosier SCCA Super Tour (Cal Club Region): 100.0% of FE's (Jeff Read)P1 race best at Hoosier SCCA Super Tour (Cal Club Region): 89.8% of FE's (Jim Devenport)P1 qualifying best at Hoosier SCCA Super Tour (Cal Club Region): 89.0% of FE's (Jim Devenport)Hoosier SCCA Super Tour (Cal Club Region)2019Cal Club Region Hoosier SCCA Super Tour @ Buttonwillow Raceway Park2020
FEFBF6P1solid race · dashed qualifying · each class's best lap as a share of FE's at the same event (the reference class, changeable above); 100% is level, higher is quicker
EventFEFBF6P1
Qual bestRace bestTrapQual bestRace bestTrapvs FE% of FEQual bestRace bestTrapvs FE% of FEQual bestRace bestTrapvs FE% of FE
Cal Club Region Hoosier SCCA Super Tour @ Buttonwillow Raceway Park ST20FEB212020-02-211:34.975Jim Devenport · fastest of 4 · top 4 within 7.1s-2.683s (-2.75%)1:36.224Jim Devenport · fastest of 4 · top 4 within 5.9s-2.632s (-2.66%)148.8Johnnie Crean+15.3 mph (+11.5%)
17 rule changes (FE: 6, P1: 11)2 cars added · 2 removed · 2 tyres & wheels · 1 engine · 1 weight · 9 wording · P1 sealed DP02-spec 2.0L Mazda MZR Elan removal date extended from 1/1/2020 to 1/1/2021. · FE2 class created for 2.0L MZR engine at 1250 lbs minimum; FE 2.3L becomes Regional only through 2019 Runoffs. · P1 sealed DP02-spec 2.0 MZR engine removed effective 1/1/2020; competitors may use Spec Line G. · P1 Spec Line F Honda K20A-FD2 reclassified from Restricted 2.0L Group to CN-spec with stock intake manifold and 64mm throttle body. · FE and FE2 minimum weight increased to 1270 lbs including driver; spring options and tire warmer ban added. · FE wet tire rear width increases from 7.5 to 8.0 inches, Hoosier 44196 W3. · P1 traction control prohibited in GCR section 9.1.8.C.H. · FE removes American Racer tires, mandates Hoosier dry 22.0 x 8.0-13 FE front and 22.0 x 10.0-13 FE rear. · P1 allows mechanical and solenoid shifters, prohibits electronic controls and pre-selected changes. · P1 bodywork minimum height provision moved to aerodynamic section; 115cm height limit for aero parts added. · P1 clarifies fender louver and brake duct rules, consolidating duplicative provisions in GCR 9.1.8.C. · FE anti-roll bars may run disconnected; one link removable front, rear, or both for safety. · FE and FE2 Enterprise bubble tail P/N WM138014 newly allowed for both classes. · P1 anti-intrusion panels now allowed anywhere on chassis sides, previously restricted. · P1 bodywork wording corrected: 'a passenger' becomes 'passenger' in three GCR sections. · P1 Engine Table reference cleaned up; no performance change. · P1 Mazda Renesis Rotary removed from Engine Table specification line.showhide
  • P1 Extend date for removing sealed DP02-spec 2.0L option #28046wordingwordingP1 sealed DP02-spec 2.0L Mazda MZR Elan removal date extended from 1/1/2020 to 1/1/2021.
  • FE Request for FE / FE2 preparation rules update #27722cars addedcars addedFE2 class created for 2.0L MZR engine at 1250 lbs minimum; FE 2.3L becomes Regional only through 2019 Runoffs.
  • P1 Remove sealed DP02-spec 2.0 MZR spec #26753removedslowerP1 sealed DP02-spec 2.0 MZR engine removed effective 1/1/2020; competitors may use Spec Line G.
  • P1 Update Revised Spec Line F #27745engineunclearP1 Spec Line F Honda K20A-FD2 reclassified from Restricted 2.0L Group to CN-spec with stock intake manifold and 64mm throttle body.
  • FE FE / FE2 Update Rules #27624weightslowerFE and FE2 minimum weight increased to 1270 lbs including driver; spring options and tire warmer ban added.
  • FE FE Wet Tire E&O #27365tyres & wheelsfasterFE wet tire rear width increases from 7.5 to 8.0 inches, Hoosier 44196 W3.
  • P1 E&O Transmissions #27098wordingunclearP1 traction control prohibited in GCR section 9.1.8.C.H.
  • FE FE Tire Update #27029tyres & wheelsunclearFE removes American Racer tires, mandates Hoosier dry 22.0 x 8.0-13 FE front and 22.0 x 10.0-13 FE rear.
  • P1 E&O Transmissions #27005wordingwordingP1 allows mechanical and solenoid shifters, prohibits electronic controls and pre-selected changes.
  • P1 Move minimum height provision to #27031wordingwordingP1 bodywork minimum height provision moved to aerodynamic section; 115cm height limit for aero parts added.
  • P1 Remove duplicative fender louver provision #27033wordingwordingP1 clarifies fender louver and brake duct rules, consolidating duplicative provisions in GCR 9.1.8.C.
  • FE FE Anti-Roll Bar Clarification #26912wordingwordingFE anti-roll bars may run disconnected; one link removable front, rear, or both for safety.
  • FE FE / FE2 Updated Bubble Tail Rule #26913cars addedcars addedFE and FE2 Enterprise bubble tail P/N WM138014 newly allowed for both classes.
  • P1 Missing word E&O #26919wordingwordingP1 anti-intrusion panels now allowed anywhere on chassis sides, previously restricted.
  • P1 E&O correction to GCR 9.1.8.C.C. #26927wordingwordingP1 bodywork wording corrected: 'a passenger' becomes 'passenger' in three GCR sections.
  • P1 Clean up reference to engine table #26648wordingwordingP1 Engine Table reference cleaned up; no performance change.
  • P1 Remove redundant spec line #26692removedremovedP1 Mazda Renesis Rotary removed from Engine Table specification line.
Hoosier SCCA Super Tour (Cal Club Region) ST19APR262019-04-261:49.749Jeff Read · only car1:50.132Jeff Read · fastest of 2119.6Joe Reppert1:37.658Jim Devenport · fastest of 3 · top 3 within 8.6s1:38.856Jim Devenport · fastest of 3 · top 3 within 4.2s133.5Jeffrey Lederman-11.276squal -12.091s89.8%qual 89.0%
7 earlier rule changes on record, in force before Hoosier SCCA Super Tour (Cal Club Region) (from 2019)7 wording · P1 Staudacher and Honda K20A-FD2 engine table language cleaned up; no performance changes. · FE wet tires updated: front Hoosier 44195 W3 and rear 44217 W3, WET designation removed. · P1 closed cockpit single-seat cars moved from subsection J.5 to subsection B.4; prohibition unchanged. · P1 engine table reference corrected from 'above' to 'below'; ECU throttle wording clarified for dual sensors and fail-safes. · P1 removes redundant TIR inlet restrictor provisions; SIR and flat plate restrictors remain required. · P1 Honda K20A-FD2 CN-spec clarifies allowed parts to OEM list only, no machining. · P1 engine table wording corrected; head designs removed from listed specifications.showhide
  • P1 Clean Up Engine Table Language #26590wordingwordingP1 Staudacher and Honda K20A-FD2 engine table language cleaned up; no performance changes.
  • FE Request to Update Hoosier Rain Tire Part Number for the FE cars #26235wordingwordingFE wet tires updated: front Hoosier 44195 W3 and rear 44217 W3, WET designation removed.
  • P1 Move single-seat closed cockpit provision to #26376wordingwordingP1 closed cockpit single-seat cars moved from subsection J.5 to subsection B.4; prohibition unchanged.
  • P1 Correct errors in GCR section 9.1.8.C.J #26144wordingwordingP1 engine table reference corrected from 'above' to 'below'; ECU throttle wording clarified for dual sensors and fail-safes.
  • P1 Remove redundant inlet restrictor provisions #25877wordingwordingP1 removes redundant TIR inlet restrictor provisions; SIR and flat plate restrictors remain required.
  • P1 Clarify Honda K20A-FD2 parts requirement #25949wordingwordingP1 Honda K20A-FD2 CN-spec clarifies allowed parts to OEM list only, no machining.
  • P1 Correct GCR section 9.1.8.C.J errors #25966wordingwordingP1 engine table wording corrected; head designs removed from listed specifications.

Best is the class's fastest lap in that event's qualifying or race sessions, with the driver who set it, how many cars set a time that session and how close the top five were; a best from fewer than three cars is greyed. With two or more classes, "vs" is the gap of each class's best to the first class's at the same event. "% of FE" is the class's best as a share of FE's best at the same event (100% is level, less is quicker): weather and track condition move every class together, so this compares across years where the raw times do not. It still breaks when FE's own field changes or one session was wet and another dry. Newest event first. The coloured figure under each value is the change from the previous event that has one (green is quicker, red slower). Whole laps only, so events with different sector layouts still compare. Weather and track condition are not accounted for.