Matt Wolfe 19 letters to Fastrack

2024-03-01 B-Spec/C-Spec BOP Adjustment for Yaris iA, 2020+ Versa, and 07-08 Honda Fit

#35382 from Matt Wolfe · Rule change · TB 24-03 (2024-03 Fastrack)

In B-Spec Spec Lines, Honda Fit (07-08), change as follows:
Min weight: "2525 2400"
Notes: "Any Cold Air Intake Package allowed (any manufacturer). This configuration is not currently eligible for Runoffs
competition. This car must compete in three (3) separate Super Tour weekends so that performance data can be collected. In
addition to SCCA data box, OBDII data collected via an AIM or similar device must be submitted."
In B-Spec Spec Lines, Honda Fit (07-08) Automatic, change as follows:
Min weight: "2525 2400"
Add to Notes: "Any Cold Air Intake Package allowed (any manufacturer). This configuration is not currently eligible for Runoffs

2024-02-01 B-Spec/C-Spec Eliminate Redundant Trans Cooler Rule

#35353 from Matt Wolfe · Rule change · TB 24-02 (2024-01 Fastrack)

In GCR, Section 9.1.10.E.44., eliminate and renumber accordingly:
"44. Auxiliary transmission coolers may be approved on a case by case basis. Part numbers must be submitted and
added to the cars spec line."

2024-02-01 B-Spec/C-Spec Equalize Mazda 2 Headers and clean up spec line

#35259 from Matt Wolfe · Rule change · TB 24-02 (2024-02 Fastrack)

In B-Spec Spec Lines, Mazda2 (10-14), change as follows:
Weight: "Effective 3-1-2024: 2280 2350"
Notes: "Helper springs F&R 0000-04-9926, Spring spacer F&R 0000-04-9925, Front sway bar end links adjstbl 0000-04-
2202, Rear sway bar 0000-04-2203-RR or 0000-04-2312, Modified strut bearing plate 0000-04-2204, Crash bolt set 0000-
04-2205, Allow rear torque bar Corksport #Mz2-3-070. Cold air intake Corksport Mz2-6-117-31100 and air duct Mz2-6-
120-10 are allowed. Effective 3-1-2024: Exhaust Header (cat delete) HB.EM 60-404-S-SS, HP-MZD001, or Mazda
Motorsports PN 0000-06-2410 permitted. Powerflex PFR19-1511BX2 rear suspension bushings allowed. Allow Mazda
part number 0000-01-2501-CR Radiator. Allow Mazda undertray part number DO8C-56- 110A, DO8C-56-311, DO7A-56-

2024-02-01 B-Spec/C-Spec Split Spec Line of Automatic and Manual 2nd Gen (09-14) Fit

#35251 from Matt Wolfe · Rule change · TB 24-02 (2024-02 Fastrack)

In B-Spec Spec Lines, classify Honda Fit AT (09-14):
"09-14 Honda Fit AT"
Gear Ratios: "2.99, 1.68, 1.07, 0.76, 0.55"
Final Drive: "4.56"
Notes: Allow damper and spring set 51600F23SA100, Damper FR LH 51605F23SA100, Damper FR RH 51606F23SA100,
Damper RR 52610F23SA100, Spring adjust asy RR 52691F23SA010. Seat upper FR spring 51688F23SA200, 51402FC4YA00
front helper spring and 51403FC4YA00 front spacer permitted. Front Damper Mount P/N 51920-F23S-A30 is allowed.
Allow rear sway bar Progress # 62.1061. Allow Setrab 50-119-7612 transmission cooler in addition to OEM. Any

2024-01-01 B-Spec/C-Spec Update 12-19 Nissan Versa Spec Line & Adjust BOP

#35074 from Matt Wolfe · Rule change · TB 24-01 (2024-01 Fastrack)

In B-Spec Spec Lines, Nissan Versa (2012), change Model as follows:
"Nissan Versa Sedan (2012-2019)"
In B-Spec Spec Lines, Nissan Versa Note (2013), change as follows:
Model: "Nissan Versa Note Hatchback (2013-2019)"
Min Weight: "2550 2490"
In B-Spec Spec Lines, Nissan Versa (2013-), delete Spec Line in its entirety.

2023-02-01 B-Spec Split up Spec lines for Automatic/Manual 2nd Gen Fit

#33292 from Matt Wolfe · Rule change · TB 23-02 (2023-02 Fastrack)

In B-Spec Spec Lines, Honda Fit (09-14), add to Notes as follows:
"Any aftermarket exhaust/header allowed for the Automatic Transmission Honda Fit."

2022-07-01 ITC ABS Weight Penalty for ITC

#32696 from Matt Wolfe · Rule change · TB 22-07 (2022-07 Fastrack)

In IT Category Specifications, GCR Section 9.1.3.D.7.d, add to Chart as follows:
Class: "ITC"
Additional Weight Required: "4%"

2021-12-01 ITC Request Spec Line for Mazda 2 in ITC

#31289 from Matt Wolfe · Rule change · TB 21-12 (2021-12 Fastrack)

In ITC Spec Lines, classify Mazda2 (10-14), as follows:
ITC Engine Type Bore x Stroke(mm)/ Displ. (cc) Weight (lbs) Notes:
Mazda Mazda2
10-14

2021-07-01 GT3 Request to Permit FP cars in GT3

#30611 from Matt Wolfe · Rule change · TB 21-07 (2021-07 Fastrack)

In GCR, Section 9.1.2.F.3. add the following:
"8. Current FP spec line cars may compete in GT3 as long as they maintain their full FP rule set."

2020-01-01 FP Request to Classify 2001-2003 Mazda Protege ES in FP

#27922 from Matt Wolfe · Rule change · TB 20-01 (2020-01 Fastrack)

In FP, classify the Mazda Protege ES (01-03) as follows:
Build a new spec line created for this new classification.

A specification table follows in the original; it is not shown here.