BoP Lab / Drivers / Brian Leib
| Track | Class | Sessions | Typical gap to class best | Closest |
|---|---|---|---|---|
| Unknown track (2.38 mi) | FC | 3 | +0.000s (0.00%) | +0.000s (0.00%) |
Gap is the driver's best lap in a session against the fastest lap in their class in that same session (zero is fastest in class), shown as time lost and as a share of the lap, so conditions cancel out and tracks can be compared. Typical is the median session.
| Event | Session | Class | # | Car | Pos | Best lap | Class best | To class best | Trap | Class trap | To class trap |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Majors @ MSR Houston | Group 2 Sunday Provisional Race Results - 16-M-4063-S | FC | 4 | LnSt | 1/1 | 42.931 | 42.931you | +0.000s (0.00%) | |||
| Majors @ MSR Houston | Group 2 Saturday Provisional Race Results - 16-M-4063-S | FC | 4 | LnSt | 1/1 | 1:50.742 | 1:50.742you | +0.000s (0.00%) | |||
| Majors @ MSR Houston | Group 2 Saturday Qualifying | FC | 4 | LnSt | 1/1 | 2:27.369 | 2:27.369you | +0.000s (0.00%) |
#40241 from Brian Leib · Rule change · TB 26-07 (2026-07 Fastrack)
In T3 Spec Lines, Audi S4 (12-14), change Notes as follows:
"Max spring rate 800 1100#/in. front and rear. F sway bar 30mm, rear sway bar 22 24 mm SPC front upper arms 81360. Separate
coolant reservoir for the water to air intercooler permitted. SPC front upper camber arms permitted. AWE Coldfront coolant
system permitted. **Must compete in 3 Hoosier Super Tour races to qualify for the Runoffs.**"
#39983 from Brian Leib · Rule change · TB 26-05 (2026-05 Fastrack)
In T3 Spec Lines, Audi S4 (12-14), change as follows:
Required Restrictor: "55mm FPR 60mm FPR"
Tire Size: "255 275"
#36341 from Brian Leib · No action required · Minutes (2024-11 Fastrack)
Thank you for your letter and thoughtful comments Brian.
#36195 from Brian Leib · Rule change · TB 24-07 (2024-07 Fastrack)
In T3 Spec Lines, Classify Audi S4 (2000-2002) as follows and allow the T2 spec line to expire.
A specification table follows in the original; it is not shown here.
#34131 from Brian Leib · No action required · Minutes (2023-08 Fastrack)
Thank you for your letter. The spec line specs are the basic allowances for the car. If there is an additional option in the notes,
that option supersedes the specs in the spec line. In your case, the "Brembo brake kit part number 3K2.8032A" may be run in its
entirety, including the 355 mm rotors.
#33567 from Brian Leib · Recommended to the Board · Minutes (2023-06 Fastrack)
In T3 Spec Lines, Remove Audi S4 (10-11) and Audi S4 (12-14) in its entirety:
"(Effective 1/1/2024) Audi S4 (10-11)Notes- AWE part#2660-13010 permitted"
"(Effective 1/1/2024) Audi S4 (12-14)Notes- AWE part#2660-13010 permitted"
#33566 from Brian Leib · No action required · Minutes (2023-06 Fastrack)
Thank you for your letter. The category rules currently allow significant hood venting and brake ducting.