Lap times across years say as much about the weather as the class. % of FE2 is each class's best lap as a share of FE2's on the same day, so the conditions drop out: 100% is level, less is quicker, and a move in it is the class getting faster or slower against the field.
Quickest here:FE2 1:35.040 Flinn Lazier, Runoffs 2018 qualifying · T1 1:28.656 Ross Murray, Runoffs 2016 qualifying · FP 1:35.938 John Walker, Runoffs 2016 qualifying · SM 1:40.514 Justin Hille, Runoffs 2016 qualifying
FE2T1FPSMsolid race · dashed qualifying · slower is lower
FE2T1FPSMsolid race · dashed qualifying · each class's best lap as a share of FE2's at the same event (the reference class, changeable above); 100% is level, less is quicker, so up the chart is quicker
2:12.326Franklin Futrelle · fastest of 8 · top 5 within 1.9s-0.149s (-0.11%)
2:11.881Franklin Futrelle · fastest of 8 · top 5 within 1.6s-1.458s (-1.09%)
143.5Steve Whitston-5.5 mph (-3.7%)
2:33.275Stephen Simonds · fastest of 26 · top 5 within 1.0s+0.880s (+0.58%)
2:33.240David Strittmatter · fastest of 25 · top 5 within 1.7s-1.031s (-0.67%)
132.4David Strittmatter±0.0 mph (±0.0%)
+21.359squal +20.949s
116.2%qual 115.8%
2:42.173Brett Kowalski · fastest of 34 · top 5 within 0.3s-0.938s (-0.58%)
2:42.725Francisco Barroso · fastest of 35 · top 5 within 0.2s-1.705s (-1.04%)
119.6Wyatt Couch+0.3 mph (+0.3%)
+30.844squal +29.847s
123.4%qual 122.6%
49 rule changes (FE2: 1, T1: 12, FP: 34, SM: 2)8 cars added · 8 weight · 6 engine · 6 induction · 2 aero · 1 removed · 1 tyres & wheels · 13 wording · 4 other · HP Mini Cooper 02-06 compression ratio increases from 10.6 to 11.0:1. · 1996-2000 Honda Civic CX/DX/LX with D16Y7 engine newly classified in HP. · HP 1275 Midget/Sprite alternate intake manifold from MG-B now permitted; balance tube shortening and flange modification allowed. · HP Honda Civic DX/LX 92–95 wheels 13x7 to 15x7, weight 2420 to 2350 lbs. · SM/SMX Mazda rear toe link part number revised from 0000-04-5361426 to 0000-04-5361. · T1 classes now require U-rated or better DOT tires; re-grooving DOT tires banned; shaving and truing only allowed. · T1 trunk lid and wing mounting wording clarified; no performance change. · EP Mazda MX-5 94-97 front track widens to 1516 mm, rear to 1534 mm. · FP Volkswagen Jetta 82-84 carburation option 2 comma removed; all five models' carb specs clarified or confirmed. · FP Spec Line Volkswagen Rabbit and Scirocco 1789cc base weight corrected to 1803 lbs. · EP Triumph GT6 auto-type drivetrain choke size increases from 44mm to 45mm. · BMW E21 320i/is (80–83) newly classified in HP Spec Lines effective 2026-05-01. · HP BMW 318is 84-85 displacement corrected to 1767 cc, 89.0 x 71.0 mm bore and stroke. · T1 LS1, LS6 removes OEM designation; 70mm restrictor requirement deleted. · T1 Spec Line Coyote Boss 302 production years corrected to 11–14, displacement 4957 cc unchanged. · SM/SMX part number 0000-10-6900 replaced with 0000-06-5016-KT in GCR 9.1.7.C.1.j.1.c. · T1 restrictor requirement removed entirely; no replacement specified. · FP Fiat X-1/9 1300 and 1500 intake and exhaust valve sizes corrected to 36.3/(1.43) and 31.2-33.3/(1.23-1.31). · FP Fiat X-1/9 & Bertone dual carburetors choke size increases from 28mm to 30mm on intake runner manifold. · T1 GT4 Spec Line 4030- permits Wagner Tuning #200001124 intercooler as replacement for OEM heat exchanger. · FP adds Toyota 5E 1497cc DOHC engine, 1900 lbs, 23mm restrictor, SIR fuel induction. · FP class adds Toyota 4E DOHC 1331 cc engine, 1900 lbs minimum weight, unrestricted fuel induction. · FP Fiat X1/9 fuel injection carburetors simplified to one 36 or 40 DCNF option; exhaust valve enlarged to 33.0/1.30. · T1 Chevrolet Corvette C6 LS1/LS6 spec line reinstated: 3200 lbs minimum, 70mm restrictor. · T1 Spec Line removes 70mm flat plate restrictor option. · EP Triumph TR2–TR4A may use 5-speed gearbox without overdrive; Weber carburetors and weight reference deleted. · EP BMW Z3 2.5L and other models get smaller restrictors, 50mm to 55mm, and Z3 2.5L weight rises 50 to 78 lbs. · FP Lancia Scorpion minimum weight cut to 1950 lbs from 2030 lbs. · FP VW Rabbit Convertible no longer required to remove factory roll bar. · FP Acura Integra and Honda Civic models gain 50–79 lbs minimum weight; Mazda Miata and Mercury Capri compression ratio to 11.0:1 and valve lift to .425". · FP Honda D15, D16, B16A, B18 engines gain 105–120 lbs minimum weight across seven configurations. · unclear · T1 non-GT4 cars: multiple restrictor increases 61–80mm range, one weight raise to 3600 lbs, L76 engine clarified, throttle body permission removed. · T1 BMW M3 E92 (08-13) Spec Line 1090 removed entirely. · EP Nissan 280Z minimum weight lowered to 2400 lbs, 2460 lbs with *, 2520 lbs with **. · EP Mazda MX-5 1.8L 90-97 minimum weight reduced to 2125 lbs. · HP Spec Lines Austin-Healey Sprite/Midget 1098cc minimum weight drops to 1550 lbs. · HP Volvo 142 P-1800 engine gains compression ratio limit 12.0:1 and valve lift limit .425 inch. · HP Mini DOHC 1.6 valve lift limit drops to .390" from .450". · FP Scirocco 83–88 classified Prep Level 1: 1733–1803 lbs, 1715–1780 cc, iron block, aluminium head, carburetted or fuel injected. · FP and HP Volkswagen Rabbit descriptions updated to clarify Cabriolet body style inclusion. · EP, FP, HP: rear drum-to-disc brake conversion clarified; rotors solid, diameter limited to largest front rotor permitted. · EP Ford Mustang 94-98 fuel injected throttle body inside diameter set to 60. · FP Volkswagen Scirocco: remove two weight tiers at 1733 and 1803 lbs, two engine options, and 13-inch wheel option; allow 15-inch wheels. · FE and FE2 Enterprise bubble tail part WM138014 now allowed; FE2 must use this configuration only. · HP Plymouth Arrow gains 4 or 5 speed transmission option specification. · Appendix G.2.3 clarifies rim width and diameter are absolute maximums; wording corrected from 'is' to 'are'. · EP, FP, HP throttle body inside dimensions and butterfly now allow +/-.25mm tolerance from stock.showhide
FP Mini Cooper Compression Ratio #40517enginefaster · engineHP Mini Cooper 02-06 compression ratio increases from 10.6 to 11.0:1.
FP 1996-2000 Honda Civic (CX, DX, VP, LX) with Engine Code D16Y7 #40322cars addedadded1996-2000 Honda Civic CX/DX/LX with D16Y7 engine newly classified in HP.
FP 1275 Midget/Sprit Alternate intake manifold E/O #40370inductionadded · inductionHP 1275 Midget/Sprite alternate intake manifold from MG-B now permitted; balance tube shortening and flange modification allowed.
FP HP Honda Civic (92-95) #40464weight -70 lbsfaster · weightHP Honda Civic DX/LX 92–95 wheels 13x7 to 15x7, weight 2420 to 2350 lbs.
SM Rear Toe Link #40271wordingwordingSM/SMX Mazda rear toe link part number revised from 0000-04-5361426 to 0000-04-5361.
T1 Tire Equality #40342tyres & wheelstyres & wheelsT1 classes now require U-rated or better DOT tires; re-grooving DOT tires banned; shaving and truing only allowed.
T1 Trunk Lid Wording #40177wordingwordingT1 trunk lid and wing mounting wording clarified; no performance change.
FP Miata track width - errors and omissions #39976aerofaster · aeroEP Mazda MX-5 94-97 front track widens to 1516 mm, rear to 1534 mm.
FP GCR Spec Line Correction #39977wordingwordingFP Volkswagen Jetta 82-84 carburation option 2 comma removed; all five models' carb specs clarified or confirmed.
FP CGR Spec Line Weight Correction #39978wordingwordingFP Spec Line Volkswagen Rabbit and Scirocco 1789cc base weight corrected to 1803 lbs.
FP Triumph GT6 Spec Change. #40098inductionfaster · inductionEP Triumph GT6 auto-type drivetrain choke size increases from 44mm to 45mm.
FP Request to Classify BMW E21 320i #40110cars addedaddedBMW E21 320i/is (80–83) newly classified in HP Spec Lines effective 2026-05-01.
FP BMW 318is 84-85 engine displacement correction #40116wordingwordingHP BMW 318is 84-85 displacement corrected to 1767 cc, 89.0 x 71.0 mm bore and stroke.
T1 Clarification on Request #39716 T1 (Spec Line #1139) #39924wordingunclearT1 LS1, LS6 removes OEM designation; 70mm restrictor requirement deleted.
T1 Mistake in Line 1430 #39958wordingwordingT1 Spec Line Coyote Boss 302 production years corrected to 11–14, displacement 4957 cc unchanged.
SM Part Number Change Request #39914otherunclearSM/SMX part number 0000-10-6900 replaced with 0000-06-5016-KT in GCR 9.1.7.C.1.j.1.c.
T1 Spec line #1139 Restrictor Change Request #39922enginefaster · engineT1 restrictor requirement removed entirely; no replacement specified.
FP Correct Valve Sizes on FP Fiat x19 1300 and 1500 #39850otherotherFP Fiat X-1/9 1300 and 1500 intake and exhaust valve sizes corrected to 36.3/(1.43) and 31.2-33.3/(1.23-1.31).
FP Dual Carburetor Adjustments #39851inductionfaster · inductionFP Fiat X-1/9 & Bertone dual carburetors choke size increases from 28mm to 30mm on intake runner manifold.
T1 Replace OEM Heat Exchanger (Intercooler) With Aftermarket #39542aeroadded · aeroT1 GT4 Spec Line 4030- permits Wagner Tuning #200001124 intercooler as replacement for OEM heat exchanger.
FP Request Toyota 5E Series Engines #38208otheraddedFP adds Toyota 5E 1497cc DOHC engine, 1900 lbs, 23mm restrictor, SIR fuel induction.
FP Request for Toyota 4E Series Engines #38209cars addedaddedFP class adds Toyota 4E DOHC 1331 cc engine, 1900 lbs minimum weight, unrestricted fuel induction.
FP Dual Carbs for the Fiat X1/9 #39593enginefaster · engineFP Fiat X1/9 fuel injection carburetors simplified to one 36 or 40 DCNF option; exhaust valve enlarged to 33.0/1.30.
T1 LS1 into Corvette C6 Spec Line Request #39716cars addedaddedT1 Chevrolet Corvette C6 LS1/LS6 spec line reinstated: 3200 lbs minimum, 70mm restrictor.
FP TR2 Notes E&O #39180wordingwordingEP Triumph TR2–TR4A may use 5-speed gearbox without overdrive; Weber carburetors and weight reference deleted.
FP Balance of Power #39187induction +50 lbsslower · inductionEP BMW Z3 2.5L and other models get smaller restrictors, 50mm to 55mm, and Z3 2.5L weight rises 50 to 78 lbs.
FP Competition Adjustment Request #39259weight -80 lbsfaster · weightFP Lancia Scorpion minimum weight cut to 1950 lbs from 2030 lbs.
FP Factory Roll Bar Removal on VW Convertible #39268wordingwordingFP VW Rabbit Convertible no longer required to remove factory roll bar.
FP FP Parity Request #39325weight +50 lbsslower · weightFP Acura Integra and Honda Civic models gain 50–79 lbs minimum weight; Mazda Miata and Mercury Capri compression ratio to 11.0:1 and valve lift to .425".
FP Adjust former-GTL Honda's with B/D-Series Engines #39374weightslower · weightFP Honda D15, D16, B16A, B18 engines gain 105–120 lbs minimum weight across seven configurations.
FP HP Volvo 142 spec omission #38994engineslower · engineHP Volvo 142 P-1800 engine gains compression ratio limit 12.0:1 and valve lift limit .425 inch.
FP HP Mini DOHC 1.6 #38996engineslower · engineHP Mini DOHC 1.6 valve lift limit drops to .390" from .450".
FP 83-88 FP Scirocco Spec Line Creation #38997cars addedaddedFP Scirocco 83–88 classified Prep Level 1: 1733–1803 lbs, 1715–1780 cc, iron block, aluminium head, carburetted or fuel injected.
FP Add to Rabbit description #39019wordingwordingFP and HP Volkswagen Rabbit descriptions updated to clarify Cabriolet body style inclusion.
FP Clean-up 9.1.5.E.7e #39025otherotherEP, FP, HP: rear drum-to-disc brake conversion clarified; rotors solid, diameter limited to largest front rotor permitted.
FP Add TB size to Ford Mustang (94-98) Spec Line #39130inductionadded · inductionEP Ford Mustang 94-98 fuel injected throttle body inside diameter set to 60.
FP Correct Existing VW Scirocco Spec Line #39140cars addedremoved · cars addedFP Volkswagen Scirocco: remove two weight tiers at 1733 and 1803 lbs, two engine options, and 13-inch wheel option; allow 15-inch wheels.
FE2 FE & FE2 Bubble Tail #38978cars addedaddedFE and FE2 Enterprise bubble tail part WM138014 now allowed; FE2 must use this configuration only.
FP HP Plymouth Arrow spec omission #38995cars addedaddedHP Plymouth Arrow gains 4 or 5 speed transmission option specification.
FP Add Wheel Diameter to Appendix G #39008wordingwordingAppendix G.2.3 clarifies rim width and diameter are absolute maximums; wording corrected from 'is' to 'are'.
FP Add TB ID tolerance to general Prod rules #39009wordingaddedEP, FP, HP throttle body inside dimensions and butterfly now allow +/-.25mm tolerance from stock.
2:12.475Franklin Futrelle · fastest of 11 · top 5 within 1.4s+0.969s (+0.74%)
2:13.339Franklin Futrelle · fastest of 10 · top 5 within 0.6s+0.591s (+0.45%)
149.0Steve Whitston+3.7 mph (+2.6%)
2:20.677James Candelaria · fastest of 5 · top 5 within 5.9s+4.099s (+3.00%)
2:21.612Drew Delmonico · fastest of 5 · top 5 within 11.8s+5.481s (+4.03%)
163.6Drew Delmonico+5.7 mph (+3.6%)
+8.273squal +8.202s
106.2%qual 106.2%
2:32.395David Strittmatter · fastest of 20 · top 5 within 2.9s+0.068s (+0.04%)
2:34.271Chris Bovis · fastest of 19 · top 5 within 1.8s+1.025s (+0.67%)
132.4David Strittmatter-1.1 mph (-0.8%)
+20.932squal +19.920s
115.7%qual 115.0%
2:43.111Bobby Gossett · fastest of 32 · top 5 within 0.3s+2.005s (+1.24%)
2:44.430Kyle Greenhill · fastest of 28 · top 5 within 0.3s+2.944s (+1.82%)
119.3Francisco Barroso-0.6 mph (-0.5%)
+31.091squal +30.636s
123.3%qual 123.1%
41 rule changes (FE2: 1, T1: 19, FP: 17, SM: 4)11 weight · 8 cars added · 6 engine · 5 induction · 3 tyres & wheels · 1 aero · 5 wording · 2 other · EP BMW Z4 03-05 gains 52mm flat plate intake restrictor. · EP Fiat 124 Spider Competition 1600 and 2000 minimum weight drops 50 lbs to 2000; carburetors now allow 36mm chokes instead of 34mm. · HP Fiat X-1/9 and Bertone 1500 minimum weights reduced to 1740 lbs, 1784 lbs, 1827 lbs; 1300 models to 1600, 1640, 1680 lbs; additional 1300 and 1500 specs to 2010, 1900 lbs. · SMX drivers must submit data acquisition files on time or face suspension and $250 fine. · SMX penalty language clarified: level 1 and 3 infractions may carry $1,000 fines, level 2 and 4 may carry $500 fines. · SM tire marking rules clarified: one Hoosier SM 7.5 P205/50/ZR17 set per Super Tour weekend, impound after first dry session, damaged tires may be replaced with used tires only. · Porsche 981 GT4 Clubsport added to T1 as Spec Line 4085, minimum weight 3100 lbs, 265/645 front and 305/680 rear tires. · T1 Honda S2000 Spec Line 1530 minimum weight drops 50 lbs to 2900. · T1 BMW E46 M3 permits BMW #GS7D36SG sequential transmission as aftermarket option in SL# 1060 and 1070. · T1 BMW M3 E92 minimum weight reduced to 3300 lbs. · T1 Mustang Darkhorse R tyres widen to 315 front and rear, weight set to 3600 lbs with driver, Runoffs eligibility requires 3 Super Tour events. · FE2 allows pre-approved driver safety and comfort seat and control modifications for drivers with disabilities, per logbook. · Chevrolet Spark 16-22 classified in HP Pre at 1850 lbs base, 1896 lbs modified, 1943 lbs. · HP Ford Festiva 88-93 minimum weight lowered to 1600 lbs, competition weight to 1640, prepared weight to 1680; compression ratio raised to 11.0:1. · T1 Cadillac CT4-V Blackwing added: 3564cc, 3750 lbs minimum, OEM ECU with reprogramming allowed. · EP BMW Z3 2.5L, Z3 2.8L, 328i E36/E46, 325i E36/E46 intake restrictors reduced 4mm each, to 52–58mm. · FP Acura Integra and Honda Civic models restricted from 55mm to 51mm intake; Del Sol VTEC weight raised to 2290, 2347, 2405 lbs. · EP, FP, HP may use any interior or exterior mirror meeting rule 9.3.36. · EP Honda S2000 1997cc minimum weight drops 75 lbs to 2375; 2157cc drops 60 lbs to 2450. · EP Mazda MX-5 Miata 99-05 minimum weight reduced to 2100 lbs, 2153 lbs with power, 2205 lbs modified. · FP Volkswagen Jetta Mark IV 4dr FWD added to GTL-FP Cars classification with 98.2 in wheelbase. · FP adds optional induction chokes as alternative to SIR, same size as listed restrictor. · T1 Mustang Spec 1430 restrictor opens 60mm to 65mm; Spec 1460 weight up to 3500 lbs, restrictor 70mm; Corvette 1190 restrictor 67mm to 70mm; BMW 1090 restrictor tightens 40mm to 35mm, expires 12/31/25; BMW 1100 weight up to 3350 lbs. · EP BMW models now require flat plate intake restrictors: Z3 2.5L 52mm, Z3 2.8L 55mm, 328i E36 58mm, 328i/ci E46 58mm, 325i E46 56mm, 325i E36 56mm, 325is M-Technic 56mm. · T1 Mustang weight to 3600 lbs, restrictor to 60mm; Corvette weight to 3500 lbs, restrictor to 67mm; BMW deleted. · T1 E46 M3 Spec Line 1050 throttle body changed from Dinan D760-3400 to VAC Motorsports VAC-TB-S54 on 3.250L engine. · T1 Chevrolet Corvette C8 (2020-2023) minimum weight drops to 3500 lbs. · T1 Chevrolet Camaro Gen 5 required restrictor increases from 75mm to 80mm flat plate. · T1 Audi R8 GT4 Spec Line #4020 max tire size changes to 315 DOT, 305/645, or 30/65-18 (f), 33/68-18 (r) Non-DOT. · EP BMW 325i/is E30 84-91 weight reduced to 2150 lbs base, 2204 lbs with turbo, 2258 lbs supercharged. · FP Sprite and Midget 1275cc and 1500cc bore, stroke, displacement, and valve specifications corrected to factory dimensions. · F Production now permits GT-Lite cars meeting Appendix N specs to compete, governed by Appendix N not PCS 9.1.5. · SMX OE instrument cluster must stay unmodified and connected; aftermarket dash allowed if wiring only re-routed; alternate gauges now permitted; foot pedal comfort mods allowed without relocation. · T1 GT4 tire sizes standardized: most cars 315 DOT with 305/660 or 305/645 Non-DOT; Camaro 305/680, Mustang 315/680 Non-DOT. · BMW M4 GT4 (G82) added to T1 as spec line 4031, 3525 lbs minimum, red power stick; F82 model switched to red power stick. · T1 now permits 5.5 inch clutch as engine option. · T1 GT4 Spec Line 4020 restrictor opens to 45mm and minimum weight drops to 3400 lbs with driver. · T1 adds Mustang Darkhorse R homologated car, 305/315 tyres, 10.5/11 in wheels, minimum weight TBD. · T1 Corvette may roll or flatten wheel opening lips, remove composite fender lips and liners, and add fender vents for tire clearance. · T1 E46 M3 S54 now allows Dinan Throttle Body #D760-3400 on the 3.250L engine. · HP 1275 Spridget compression ratio raised to 12.0:1; 1098cc also raised to 12.0:1.showhide
FP BMW Z4 update #38490inductionslower · inductionEP BMW Z4 03-05 gains 52mm flat plate intake restrictor.
FP EP Fiat 124 Spider Competition Adjustment Request #38498weight -50 lbsfaster · weightEP Fiat 124 Spider Competition 1600 and 2000 minimum weight drops 50 lbs to 2000; carburetors now allow 36mm chokes instead of 34mm.
FP Base Weight Adjustment for H-Production X1/9 Spec Lines #38255weight -50 lbsfaster · weightHP Fiat X-1/9 and Bertone 1500 minimum weights reduced to 1740 lbs, 1784 lbs, 1827 lbs; 1300 models to 1600, 1640, 1680 lbs; additional 1300 and 1500 specs to 2010, 1900 lbs.
SM SMX Data Submission - Penalties #38248otheraddedSMX drivers must submit data acquisition files on time or face suspension and $250 fine.
SM Committee) SMX Penaly Clarification updated language #38337wordingwordingSMX penalty language clarified: level 1 and 3 infractions may carry $1,000 fines, level 2 and 4 may carry $500 fines.
SM Clarify Tire Marking Regs #38005wordingwordingSM tire marking rules clarified: one Hoosier SM 7.5 P205/50/ZR17 set per Super Tour weekend, impound after first dry session, damaged tires may be replaced with used tires only.
T1 Acceptance of Porsche 981 GT4 Clubsport into T1 #36664cars addedaddedPorsche 981 GT4 Clubsport added to T1 as Spec Line 4085, minimum weight 3100 lbs, 265/645 front and 305/680 rear tires.
T1 Request to Restore T1 Honda S2000 to Proper Weights #37644weight -50 lbsfaster · weightT1 Honda S2000 Spec Line 1530 minimum weight drops 50 lbs to 2900.
T1 DCT Transmission in E46 #37964cars addedaddedT1 BMW E46 M3 permits BMW #GS7D36SG sequential transmission as aftermarket option in SL# 1060 and 1070.
T1 Reduce E92 M3 Minimum Weight to 3050 #38092weightfaster · weightT1 BMW M3 E92 minimum weight reduced to 3300 lbs.
T1 Finalize Spec Line for T1 Darkhorse #38106tyres & wheelsfaster · tyres & wheelsT1 Mustang Darkhorse R tyres widen to 315 front and rear, weight set to 3600 lbs with driver, Runoffs eligibility requires 3 Super Tour events.
FE2 Driver Safety & Comfort #37965otheraddedFE2 allows pre-approved driver safety and comfort seat and control modifications for drivers with disabilities, per logbook.
FP Request for Classification of Chevrolet Spark #37755cars addedaddedChevrolet Spark 16-22 classified in HP Pre at 1850 lbs base, 1896 lbs modified, 1943 lbs.
FP Request to Lower Ford Festiva Minimum Weight to 1600 LBS #37939weight -100 lbsfaster · weightHP Ford Festiva 88-93 minimum weight lowered to 1600 lbs, competition weight to 1640, prepared weight to 1680; compression ratio raised to 11.0:1.
FP Request Competition Adjustment to BMW Z3 2.5L #37120inductionslower · inductionEP BMW Z3 2.5L, Z3 2.8L, 328i E36/E46, 325i E36/E46 intake restrictors reduced 4mm each, to 52–58mm.
FP FP Class Adjustments #37458inductionslower · inductionFP Acura Integra and Honda Civic models restricted from 55mm to 51mm intake; Del Sol VTEC weight raised to 2290, 2347, 2405 lbs.
FP Interpretation of Production Rules on Mirrors #37235wordingaddedEP, FP, HP may use any interior or exterior mirror meeting rule 9.3.36.
FP Weight Reduction for Honda S2000 #37466weightfaster · weightEP Honda S2000 1997cc minimum weight drops 75 lbs to 2375; 2157cc drops 60 lbs to 2450.
FP Errors & Omissions #37648cars addedaddedFP Volkswagen Jetta Mark IV 4dr FWD added to GTL-FP Cars classification with 98.2 in wheelbase.
FP GTL/FP consolidation 2025 Rules #37659inductionadded · inductionFP adds optional induction chokes as alternative to SIR, same size as listed restrictor.
T1 Correct and make new T1 BOP adjustments. #37737weight +75 lbsslower · weightT1 Mustang Spec 1430 restrictor opens 60mm to 65mm; Spec 1460 weight up to 3500 lbs, restrictor 70mm; Corvette 1190 restrictor 67mm to 70mm; BMW 1090 restrictor tightens 40mm to 35mm, expires 12/31/25; BMW 1100 weight up to 3350 lbs.
FP Effective date for Jan 2025 GCR updates #37654inductionslower · inductionEP BMW models now require flat plate intake restrictors: Z3 2.5L 52mm, Z3 2.8L 55mm, 328i E36 58mm, 328i/ci E46 58mm, 325i E46 56mm, 325i E36 56mm, 325is M-Technic 56mm.
T1 T1 Parity Compared to GT4 #37170weight +125 lbsslower · weightT1 Mustang weight to 3600 lbs, restrictor to 60mm; Corvette weight to 3500 lbs, restrictor to 67mm; BMW deleted.
T1 Clarification of Request Approval #37273 #37399engineengineT1 E46 M3 Spec Line 1050 throttle body changed from Dinan D760-3400 to VAC Motorsports VAC-TB-S54 on 3.250L engine.
T1 C8 Corvette Facts #37400weight -100 lbsfaster · weightT1 Chevrolet Corvette C8 (2020-2023) minimum weight drops to 3500 lbs.
T1 Camaro Gen 5 Competitive Disadvantage #37440enginefaster · engineT1 Chevrolet Camaro Gen 5 required restrictor increases from 75mm to 80mm flat plate.
T1 Tire Changes in the Rules for GT4 #37497tyres & wheelstyres & wheelsT1 Audi R8 GT4 Spec Line #4020 max tire size changes to 315 DOT, 305/645, or 30/65-18 (f), 33/68-18 (r) Non-DOT.
FP Request to Reduce Weight of BMW 325i/is E30 (84-91) Spec Line #37119weight -50 lbsfaster · weightEP BMW 325i/is E30 84-91 weight reduced to 2150 lbs base, 2204 lbs with turbo, 2258 lbs supercharged.
FP Fix Error in Spridget Spec Line #37437wordingwordingFP Sprite and Midget 1275cc and 1500cc bore, stroke, displacement, and valve specifications corrected to factory dimensions.
FP Create ruleset that allows GTL cars to run in FP #37485cars addedaddedF Production now permits GT-Lite cars meeting Appendix N specs to compete, governed by Appendix N not PCS 9.1.5.
SM E&O SMX Regs 9.1.7.1.D.5.u-.w #37070wordingwordingSMX OE instrument cluster must stay unmodified and connected; aftermarket dash allowed if wiring only re-routed; alternate gauges now permitted; foot pedal comfort mods allowed without relocation.
T1 Changes to T1 Tires for GT4 and Other Cars #35383tyres & wheelsunclearT1 GT4 tire sizes standardized: most cars 315 DOT with 305/660 or 305/645 Non-DOT; Camaro 305/680, Mustang 315/680 Non-DOT.
T1 G82 M4 GT4 inclusion in T1 #35864cars addedaddedBMW M4 GT4 (G82) added to T1 as spec line 4031, 3525 lbs minimum, red power stick; F82 model switched to red power stick.
T1 Alt. Clutch Allowance #36606engineadded · engineT1 now permits 5.5 inch clutch as engine option.
T1 BOP Changes Need Updates #36667engine -150 lbsfaster · engineT1 GT4 Spec Line 4020 restrictor opens to 45mm and minimum weight drops to 3400 lbs with driver.
T1 Request Ford Performance Darkhorse R in T1 #37136cars addedaddedT1 adds Mustang Darkhorse R homologated car, 305/315 tyres, 10.5/11 in wheels, minimum weight TBD.
T1 Car Mods for T1 Corvette under line item 1150 #37173aeroadded · aeroT1 Corvette may roll or flatten wheel opening lips, remove composite fender lips and liners, and add fender vents for tire clearance.
T1 Increased Bore Throttle Bodies for E46 M3 S54 Engine #37273engineadded · engineT1 E46 M3 S54 now allows Dinan Throttle Body #D760-3400 on the 3.250L engine.
FP 1275 HP Spridget Level 2 Only #36518enginefaster · engineHP 1275 Spridget compression ratio raised to 12.0:1; 1098cc also raised to 12.0:1.
2:11.506Porter Aiken · fastest of 18 · top 5 within 0.5s-1.300s (-0.98%)
2:12.748Porter Aiken · fastest of 17 · top 5 within 2.0s-0.523s (-0.39%)
145.3Porter Aiken+1.9 mph (+1.3%)
2:16.578Andrew Aquilante · fastest of 8 · top 5 within 4.8s-1.068s (-0.78%)
2:16.131Andrew Aquilante · fastest of 7 · top 5 within 4.0s-2.570s (-1.85%)
157.9Andrew Aquilante-0.8 mph (-0.5%)
+3.383squal +5.072s
102.5%qual 103.9%
2:32.327Cliff Ira · fastest of 26 · top 5 within 2.1s+0.913s (+0.60%)
2:33.246Kevin Ruck · fastest of 24 · top 5 within 1.4s-0.787s (-0.51%)
133.5David Strittmatter+0.3 mph (+0.2%)
+20.498squal +20.821s
115.4%qual 115.8%
2:41.106Ethan Goulart · fastest of 49 · top 5 within 0.5s-1.103s (-0.68%)
2:41.486Brett Kowalski · fastest of 43 · top 5 within 0.3s-2.262s (-1.38%)
119.9Alex Bertagnoli-1.4 mph (-1.2%)
+28.738squal +29.600s
121.6%qual 122.5%
38 rule changes (T1: 13, FP: 21, SM: 4)13 cars added · 10 weight · 3 engine · 3 removed · 2 induction · 6 wording · 1 other · FP Honda CRX/CRX Si 84-87 block material changes from iron to aluminium. · SMX Spec MX-5 camera requirement: non-functioning recorder now will instead of may warrant penalty or disqualification. · SM and SMX must run latest AIM Data Logger Spec MX-5 ECU Protocol, effective 2024-09-01. · SMX Mazda MX-5 OE versus OEM definitions clarified in GCR section 9.1.7.1; wording change only. · SM and SMX now allow an alternate shifter bushing at the bottom of the shift lever. · HP Volkswagen Golf and Jetta 85-92 track correction: front 1537 mm (60.5 in.), rear 1529 mm (60.2 in.). · Nissan 300ZX 84–89 added to EP, 2550–2678 lbs, 2960 cc SOHC, fuel injection, 12.0:1 compression, 0.500" valve lift limit. · Mazda RX-7 92-97 added to EP Prep as Level 2 rotary 13B 6-port, 2200–2310 lbs, carb or fuel injection, 42 mm choke. · EP Mazda RX-8 (04-11) alternate spec line removed; single spec line retained. · FP Honda CRX 84-87 plastic front header nose panel, rocker skirts, door caps can now be replica alternate material stock appearance. · FP Acura Integra 90-01 and Honda Civic Del Sol VTEC, Civic Si 99-00 require 55mm flat plate intake restrictor. · Mercedes AMG-C63 S 2023 added to T1 with 4000 cc, 3700 lb minimum weight, no restrictor. · T1 Honda S2000 classified: 1530 cc max, 2950 lbs minimum, 4.75" supercharger pulley, 6.75" crank pulley. · HP removes four redundant VW spec lines: Rabbit Cabriolet 1780, Scirocco 1588, Scirocco 1780 8-valve 83-88, Scirocco 1588. · FP Mazda Protégé ES (01-03) renamed to Mazda Protégé ES/5 (01-03). · T1 adds Pontiac GTO 2006-2009 LS1 5700cc, 3400 lbs minimum, engine repositioning allowed. · HP Honda Civic 1.5 1988-91 minimum weight drops 70 lbs to 2175; also 2-speed and 3-speed minimums cut 72 and 73 lbs. · T1 Chevrolet Corvette C8 (2020–23) restrictor plate increases from 70mm to 72mm flat plate. · T1 category removes 23 car spec lines including NSX, Viper, Ferrari, Mazda, Nissan, Porsche, Subaru, Toyota; Porsche 997 spec line 1680 expiration removed. · EP BMW Z3 2.5L minimum weight increased to 2500 lbs, 2563 lbs with power adder, 2625 lbs with two power adders. · FP Honda throttle body inside diameters corrected across seven models: Civic 1.5 to 42", Civic Si to 55", CRX 1.5 to 42", CRX 84-87 to 33/42", CRX Si 88-91 to 55". · EP Mazda MX-5 1.8L (90-97) minimum weight cut to 2150 lbs; (94-97) variants to 2000, 2050, 2100 lbs. · EP Triumph GT6 dual 1.75-inch carburetors weight rises to 1940 lbs; triple Weber 40 DCOE option added at 1990 lbs. · EP Honda S2000 fuel injected throttle body inside diameter increases from 62mm to 64mm. · EP Triumph TR8 dry sump allowance moved from Carburetor line to Notes. · EP Porsche 944/924S 2.5L and 2.7L minimum weights corrected: 2479cc to 2306–2363 lbs, 2681cc to 2358–2415 lbs. · T1 GT4 cars gain Runoffs eligibility; weights and power maps adjusted across six models; tire rules now allow IMSA or SRO GT4 slicks. · T1 removes 27 spec line numbers entirely, including engine, suspension, brake and aero specifications. · EP Porsche 944/924S combines 2.5L and 2.7L variants (83-89), raises weight to 2250–2415 lbs, allows 2681cc displacement. · FP Toyota Corolla 2TC loses 43 lbs to 1810; HP Corolla loses 50–52 lbs to 1910–2006. · EP Triumph GT6 minimum weight drops to 1800 lbs. · T1 Chevrolet Corvette C5 LS2 added: 6000 cc, 3300 lbs minimum, 72mm restrictor, carbon aero option −50 lbs. · T1 adds Chevrolet Corvette C7 (14–19) including Z51, Grandsport as homologated car. · T1 Gen 5 Camaro minimum weight cut 75 lbs to 3475; restrictor opens from 70mm to 75mm flat plate. · T1 Aston Martin Vantage gains OEM Sportshift II transmission as permitted option. · Pontiac GTO 2006-2009 re-integrated to T1 with LS2 at 3400 lbs, 72mm restrictor, or LS3 at 3500 lbs, 61mm restrictor. · T1 Porsche 997-1 GT3 Cup added as spec line 4210, minimum weight 3050 lbs, 996 spec line 1670 removed.showhide
FP Errors/emissions Honda Civic/CRX #36700enginefaster · engineFP Honda CRX/CRX Si 84-87 block material changes from iron to aluminium.
SM SMX Camera Rule Correction #36496wordingwordingSMX Spec MX-5 camera requirement: non-functioning recorder now will instead of may warrant penalty or disqualification.
SM Committee) AIM ECU Protocol #36556engineadded · engineSM and SMX must run latest AIM Data Logger Spec MX-5 ECU Protocol, effective 2024-09-01.
SM Committee) OE versus OEM Definitons #36608wordingwordingSMX Mazda MX-5 OE versus OEM definitions clarified in GCR section 9.1.7.1; wording change only.
SM Committee) Shifter Bushing #36611otheraddedSM and SMX now allow an alternate shifter bushing at the bottom of the shift lever.
FP Errant entry in HP production line item #36231wordingwordingHP Volkswagen Golf and Jetta 85-92 track correction: front 1537 mm (60.5 in.), rear 1529 mm (60.2 in.).
FP NIssan 300ZX Z31 to EP #35830cars addedaddedNissan 300ZX 84–89 added to EP, 2550–2678 lbs, 2960 cc SOHC, fuel injection, 12.0:1 compression, 0.500" valve lift limit.
FP RX7 1993 and Up Request In EP Spec Lines, classify #36031cars addedaddedMazda RX-7 92-97 added to EP Prep as Level 2 rotary 13B 6-port, 2200–2310 lbs, carb or fuel injection, 42 mm choke.
FP Clean-up Multiple EP RX-8 Spec Lines In EP #36156cars addedremoved · cars addedEP Mazda RX-8 (04-11) alternate spec line removed; single spec line retained.
FP Request to Replace CRX Plastic Panels #35876cars addedaddedFP Honda CRX 84-87 plastic front header nose panel, rocker skirts, door caps can now be replica alternate material stock appearance.
FP FP data and parity #35896inductionadded · inductionFP Acura Integra 90-01 and Honda Civic Del Sol VTEC, Civic Si 99-00 require 55mm flat plate intake restrictor.
T1 Please Expedite classing the C63 Mercedes #35987cars addedaddedMercedes AMG-C63 S 2023 added to T1 with 4000 cc, 3700 lb minimum weight, no restrictor.
FP Request to Review Z3 2.5 Spec Line #35073weight +50 lbsslower · weightEP BMW Z3 2.5L minimum weight increased to 2500 lbs, 2563 lbs with power adder, 2625 lbs with two power adders.
FP Corrections to Honda Spec Lines in FP #35250wordingunclearFP Honda throttle body inside diameters corrected across seven models: Civic 1.5 to 42", Civic Si to 55", CRX 1.5 to 42", CRX 84-87 to 33/42", CRX Si 88-91 to 55".
FP Miata Alternate Head #35253weight -50 lbsfaster · weightEP Mazda MX-5 1.8L (90-97) minimum weight cut to 2150 lbs; (94-97) variants to 2000, 2050, 2100 lbs.
FP Honda S2000 throttle body #35272inductionfaster · inductionEP Honda S2000 fuel injected throttle body inside diameter increases from 62mm to 64mm.
FP Correction within Triumph TR8 Spec Line #35315wordingwordingEP Triumph TR8 dry sump allowance moved from Carburetor line to Notes.
FP Correction to EP 924S/944 Spec Line #35317weightweightEP Porsche 944/924S 2.5L and 2.7L minimum weights corrected: 2479cc to 2306–2363 lbs, 2681cc to 2358–2415 lbs.
T1 GT4 batch adjustment in T1 #35162cars added -85 lbsaddedT1 GT4 cars gain Runoffs eligibility; weights and power maps adjusted across six models; tire rules now allow IMSA or SRO GT4 slicks.
T1 Remove T1 spec lines #35192removedremovedT1 removes 27 spec line numbers entirely, including engine, suspension, brake and aero specifications.
T1 New T1 add spec line for C5 corvette LS2 engines (Copy from C6) #33764cars addedaddedT1 Chevrolet Corvette C5 LS2 added: 6000 cc, 3300 lbs minimum, 72mm restrictor, carbon aero option −50 lbs.
T1 C7 Corvette Rule Change Request #34897cars addedaddedT1 adds Chevrolet Corvette C7 (14–19) including Z51, Grandsport as homologated car.
T1 Camaro Gen 5 Weight Reduction Due to Competitive Disadvantage #35092weight -75 lbsfaster · weightT1 Gen 5 Camaro minimum weight cut 75 lbs to 3475; restrictor opens from 70mm to 75mm flat plate.
T1 Addendum to Letter #35022: Drivetrain Rule #35105cars addedaddedT1 Aston Martin Vantage gains OEM Sportshift II transmission as permitted option.
T1 2004 - 2006 Pontiac GTO Re-Integration Back Into T1 #34403cars addedaddedPontiac GTO 2006-2009 re-integrated to T1 with LS2 at 3400 lbs, 72mm restrictor, or LS3 at 3500 lbs, 61mm restrictor.
T1 Request to Classify Porsche 997-1 GT3 Cup #34561cars addedaddedT1 Porsche 997-1 GT3 Cup added as spec line 4210, minimum weight 3050 lbs, 996 spec line 1670 removed.
1:50.665Charles Russell Turner · fastest of 26 · top 5 within 2.3s-0.188s (-0.17%)
1:51.098Franklin Futrelle · fastest of 19 · top 5 within 1.4s-20.947s (-15.86%)
141.3Franklin Futrelle-0.6 mph (-0.4%)
1:54.520Andrew Aquilante · fastest of 12 · top 5 within 3.7s-0.370s (-0.32%)
1:55.488Andrew Aquilante · fastest of 12 · top 5 within 2.7s-20.579s (-15.12%)
159.2James Candelaria+1.6 mph (+1.0%)
+4.390squal +3.855s
104.0%qual 103.5%
2:08.248Cliff Ira · fastest of 21 · top 5 within 1.0s+2.031s (+1.61%)
2:07.787Cliff Ira · fastest of 20 · top 5 within 0.8s-9.854s (-7.16%)
133.7Cliff Ira+1.1 mph (+0.9%)
+16.689squal +17.583s
115.0%qual 115.9%
2:14.986Danny Steyn · fastest of 52 · top 5 within 0.1s+0.322s (+0.24%)
2:16.229Julian DaCosta · fastest of 46 · top 5 within 0.3s-2.878s (-2.07%)
120.3Jim Drago+1.1 mph (+0.9%)
+25.131squal +24.321s
122.6%qual 122.0%
26 rule changes (T1: 19, FP: 6, SM: 1)9 cars added · 4 engine · 3 weight · 2 tyres & wheels · 1 aero · 1 induction · 1 removed · 5 wording · Chevrolet Camaro GT4-R added to T1 GT4 Spec Line 4035, 315 tires, 3375 lbs minimum, ineligible for Runoffs. · T1 Dodge Viper ACR / SRT RT-10 and ACR/ACR-X spec lines 1350 and 1370 remove 12/23 expiration dates. · T1 GT4 McLaren 570S, Mercedes AMG GT4, and Porsche 718 Cayman GT4 CS MR now eligible for Runoffs competition. · T1 GT4 BMW M4 spec line number changed from 4050 to 4030. · T1 Chevrolet Corvette C5 rear spoiler to 5 inches above bumper allowed, plus 50 lbs; carbon aero parts permitted with 50 lb decrease. · FP and HP Sprite and Spitfire 1500 intake valve size corrected to 36.6 mm, removing prior decimal specifications. · HP Volkswagen Rabbit Cabriolet 1780 removed; Rabbit 1588 and 1715 reclassified with year and body-type clarifications. · T1 Dodge Viper ACR/ACR-X restrictor increases from 50mm to 60mm flat plate. · T1 Dodge Viper ACR/ACR-X Spec Line 1370 restrictor increases to 55mm; Spec Line 1390 decreases to 55mm flat plates. · T1 Ford Mustang S197 (05-14) must use OEM 8.8 differential housing. · T1 Chevrolet Camaro Gen 5 LS7 gains two spec lines with 70mm and 53mm restrictors, both 3450 lbs minimum. · T1 Chevrolet Camaro Gen 5, Corvette C5 and C6: resleeve restricted to stock parameters for engine repair or replacement, not LS3 bore/stroke. · Ford Fiesta HP model years change to 11-19; Chevrolet Sonic FP model years change to 12-19. · T1 Ford Mustang S197 (05-14) reinstated with 5.0L Voodoo engine, 3550 lbs minimum, 75mm restrictor. · Toyota Celica 78-80 classified FP Prep level 2, 2100–2205 lbs, 2190 cc SOHC four-cylinder, stock carburetion, 11.0:1 compression limit, .450" valve lift limit. · T1-GT4 minimum weights set: Aston Martin Vantage AMR 3575 lbs, Audi R8 3550, BMW M4 3500, Ford Mustang 3550, McLaren 570S 3450, Mercedes AMG 3450, Porsche 718 Cayman CS MR 3200, Porsche 718 RS 3450, Toyota Supra 3350. · T1-GT4 McLaren 570S front tyre widens from 285 to 315; Mercedes AMG GT4 front tyre widens from 275 to 315. · T1 Chevrolet Camaro Gen 5 LS3-6160 adds new Spec Line 1135 with 70mm flat plate restrictor, 3550 lbs minimum weight. · T1 aftermarket sequential gearbox cars must have 1:1 or greater top gear ratio, OEM location, max 10 inch bellhousing; non-sequential cars gain 100 lbs weight break. · T1 GT4 all nine cars lose 125 lbs minimum weight with driver across the range. · T1 pre-2023 rules and spec lines removed entirely, effective 2023-03-01. · FP Mazda Protégé ES (01-03) renamed to Protégé ES/5 (01-03) to include P5 model variant. · GT4 McLaren 570S maximum tyre size set to 285 front, 315 rear. · EP, FP, HP port matching limited to 1 inch depth from mating surface. · SM Mazda MX-5 Miata 01-05 minimum weight rises to 2450 lbs, or 2465 with alternate bore. · T1 adds eight GT4 cars: Aston Martin, Audi, BMW, Ford, McLaren, Mercedes, two Porsches, Toyota, minimum weights 3200–3575 lbs, restricted by SRO 2022 rules.showhide
T1 Why no Camaro? #34421cars addedaddedChevrolet Camaro GT4-R added to T1 GT4 Spec Line 4035, 315 tires, 3375 lbs minimum, ineligible for Runoffs.
T1 Request to Remove Expiration from T1 spec lines #1350 & #1370 #34470wordingwordingT1 Dodge Viper ACR / SRT RT-10 and ACR/ACR-X spec lines 1350 and 1370 remove 12/23 expiration dates.
T1 Remove #34475cars addedaddedT1 GT4 McLaren 570S, Mercedes AMG GT4, and Porsche 718 Cayman GT4 CS MR now eligible for Runoffs competition.
T1 Error in T1 GT4 numbering scheme- #34578wordingwordingT1 GT4 BMW M4 spec line number changed from 4050 to 4030.
T1 C5 Approved Aero That Was Mistakenly Deleted #34374aeroslower · aeroT1 Chevrolet Corvette C5 rear spoiler to 5 inches above bumper allowed, plus 50 lbs; carbon aero parts permitted with 50 lb decrease.
FP Correct Intake Valve Size on 1500cc Midget/Spitfire #34419wordingwordingFP and HP Sprite and Spitfire 1500 intake valve size corrected to 36.6 mm, removing prior decimal specifications.
FP ITC to FP? #34286cars addedremoved · cars addedHP Volkswagen Rabbit Cabriolet 1780 removed; Rabbit 1588 and 1715 reclassified with year and body-type clarifications.
T1 Viper Cleanup #34107inductionfaster · inductionT1 Dodge Viper ACR/ACR-X restrictor increases from 50mm to 60mm flat plate.
T1 Viper 8300 OEM FPR Size #34268engineunclearT1 Dodge Viper ACR/ACR-X Spec Line 1370 restrictor increases to 55mm; Spec Line 1390 decreases to 55mm flat plates.
T1 Ford Mustang S197 (05-14) Clarification #34450wordingwordingT1 Ford Mustang S197 (05-14) must use OEM 8.8 differential housing.
T1 Gen 5 Camaro Engine #33875cars addedaddedT1 Chevrolet Camaro Gen 5 LS7 gains two spec lines with 70mm and 53mm restrictors, both 3450 lbs minimum.
T1 Inquiry to letter #33682 #34071engineslower · engineT1 Chevrolet Camaro Gen 5, Corvette C5 and C6: resleeve restricted to stock parameters for engine repair or replacement, not LS3 bore/stroke.
FP Request to Classify Sonic and Fiesta in HP #34264cars addedaddedFord Fiesta HP model years change to 11-19; Chevrolet Sonic FP model years change to 12-19.
T1 Request to reinstate T1 S197 Mustang #34048cars addedaddedT1 Ford Mustang S197 (05-14) reinstated with 5.0L Voodoo engine, 3550 lbs minimum, 75mm restrictor.
T1 T1 GT4 adjustments #33786weightunclearT1-GT4 minimum weights set: Aston Martin Vantage AMR 3575 lbs, Audi R8 3550, BMW M4 3500, Ford Mustang 3550, McLaren 570S 3450, Mercedes AMG 3450, Porsche 718 Cayman CS MR 3200, Porsche 718 RS 3450, Toyota Supra 3350.
T1 Touring 1 Tire Sizes #34191tyres & wheelsfaster · tyres & wheelsT1-GT4 McLaren 570S front tyre widens from 285 to 315; Mercedes AMG GT4 front tyre widens from 275 to 315.
T1 Clarification for Camaro Gen5 2010-2015 #33739engineslower · engineT1 Chevrolet Camaro Gen 5 LS3-6160 adds new Spec Line 1135 with 70mm flat plate restrictor, 3550 lbs minimum weight.
T1 Sequential Gearbox Limitations in T1 #33691engineadded · engineT1 aftermarket sequential gearbox cars must have 1:1 or greater top gear ratio, OEM location, max 10 inch bellhousing; non-sequential cars gain 100 lbs weight break.
T1 T1 GT4 adjustments #33786weightfaster · weightT1 GT4 all nine cars lose 125 lbs minimum weight with driver across the range.
T1 Sunset of pre 2023 Touring 1 Rules. #33916removedremovedT1 pre-2023 rules and spec lines removed entirely, effective 2023-03-01.
FP Request to Add Mazda Protege P5 to FP #33664cars addedaddedFP Mazda Protégé ES (01-03) renamed to Protégé ES/5 (01-03) to include P5 model variant.
T1 Corrections to T1 Spec Lines #33678tyres & wheelstyres & wheelsGT4 McLaren 570S maximum tyre size set to 285 front, 315 rear.
FP Review Limited Prep Port Matching Rules #33600wordingwordingEP, FP, HP port matching limited to 1 inch depth from mating surface.
SM BOP for NB1 and NB2 #32309weightslower · weightSM Mazda MX-5 Miata 01-05 minimum weight rises to 2450 lbs, or 2465 with alternate bore.
T1 GT4 section to Current T1 Rules. #33632cars addedaddedT1 adds eight GT4 cars: Aston Martin, Audi, BMW, Ford, McLaren, Mercedes, two Porsches, Toyota, minimum weights 3200–3575 lbs, restricted by SRO 2022 rules.
1:50.853Charles Russell Turner · fastest of 25 · top 5 within 1.1s-0.209s (-0.19%)
2:12.045Jason Conzo · fastest of 22 · top 5 within 1.8s+19.891s (+17.74%)
141.9Eric Cruz-0.6 mph (-0.5%)
1:54.890Andrew Aquilante · fastest of 10 · top 5 within 3.2s+0.119s (+0.10%)
2:16.067Andrew Aquilante · fastest of 8 · top 5 within 15.9s+1.654s (+1.23%)
157.5Mark Boden+1.3 mph (+0.8%)
+4.022squal +4.037s
103.0%qual 103.6%
2:06.217Eric Prill · fastest of 18 · top 5 within 1.5s-1.219s (-0.96%)
2:17.641Mason Workman · fastest of 15 · top 5 within 3.2s+9.565s (+7.47%)
132.5Cliff Ira+1.2 mph (+0.9%)
+5.596squal +15.364s
104.2%qual 113.9%
2:14.664Danny Steyn · fastest of 60 · top 5 within 0.2s+0.112s (+0.08%)
2:19.107Travis Wiley · fastest of 58 · top 5 within 0.9s+2.648s (+1.94%)
119.2Jonathan Neudorf-0.6 mph (-0.5%)
+7.062squal +23.811s
105.3%qual 121.5%
37 rule changes (T1: 11, FP: 25, SM: 1)7 cars added · 7 engine · 7 weight · 3 induction · 2 suspension & brakes · 1 aero · 1 tyres & wheels · 8 wording · 1 other · Volkswagen New Beetle 2.5L 5-cyl DOHC classified in EP at 2400–2520 lbs with fuel injection. · EP Mazda RX-7 12A/13B and 13B now permit 2 bbl fuel injected throttle body with 42mm chokes on dual-y manifold. · EP VW Corrado 92-95 stroke corrected to 90.3 mm and displacement to 2792 cc. · T1 Camaro, CTS, Firebird, GTO minimum weight reduced to 3475 lbs from 3500 lbs. · EP Subaru BRZ title updated to include model years 13–20; Toyota 86/Scion FR-S title likewise updated to 13–20. · T1-LP Ford Mustang FP350S restrictor increases from 70mm to 75mm. · Mercedes-Benz AMG GT4 (2017-2021) added to T1 with 3400 lb minimum weight, SRO Power Level 2 engine control. · FP Lotus Super Seven 91.7 ci minimum weight increases 50 lbs, to 1580. · EP Mazda MX-5 Global Cup 16-22 minimum weight set to 2400 lbs; sequential gearbox allowed with 150 lbs penalty. · BMW 128i (08-13) classified in EP at 2700 lbs minimum with 2996 cc engine, stock throttle body, 11.0:1 compression and 0.400" valve lift limits. · EP, FP, HP open cars now allow carbon fiber hardtops if they retain OEM exterior profiles. · Mazda Protégé ES 99-00 classified FP, 2150–2258 lbs, 1839 cc DOHC, fuel injection, 11.0:1 compression, 0.450" valve lift. · EP Mazda RX-8 13B carburetor option replaced with fuel-injected throttle body or stock fuel injection. · EP, FP, HP Production clarify idle control valve options: stock original allowed, removable with blocked ports, or mechanical replaced with electronic stock type. · FP BMW 325e/es displacement corrected to 2693 cc. · SM Majors must run authorized Penske shock and mount; Regional competitors not required until further evaluation. · T1 Dodge Viper ACR displacement rises to 8400 cc OEM, minimum weight drops to 3550 lbs. · T1 Limited T1 specification reference removed; all T1 cars now have unified allowances. · T1 Mazda RX-7 added: 2700 lbs minimum weight, 44mm restrictor, 13B rotary with single Garrett Turbo #3076. · EP BMW Z3 2.5L intake restrictor reduced from 59mm to 58mm flat plate. · Ford Mustang 94-98 weight reduced to 2550/2614/2678 lbs; 99-03 3.8L classified EP at 2700/2768/2835 lbs. · EP, FP, HP Improved Touring cars may use any DOT-approved tyre as defined by 9.3.45. · FP VW Golf III/Jetta III 93-98 intake valve shrinks to 39.5 mm (1.56 in), exhaust to 32.9 mm (1.30 in). · T1 Cadillac CTS/CTS-V, Chevrolet Camaro, Pontiac Firebird, Pontiac GTO LS3 minimum weight reduced to 3475 lbs. · T1 Camaro, CTS, Firebird, GTO with 7011 max displacement loses 50 lbs, to 3500. · T1 brake rotors no longer limited to 33mm thickness maximum. · EP, FP, HP: stock/original idle control devices permitted unmodified or completely removed with openings blocked. · EP Porsche 968 intake valve size changes to 39.0 mm, 1.54 mm seat width. · EP, FP, HP front-wheel-drive cars may alter body and subframes to install alternate axle shaft, matching RWD freedom. · EP BMW Z3 2.5L adds alternate throttle body option with Turner adapter and permits head casting 1738400. · FP Honda Civic Del Sol VTEC compression ratio limited to 11.0:1, valve lift to .425", removes dry sump and internal engine prep allowances. · FP Honda Prelude 84-87 and Mazda GLC/323 86-88 valve lift measurement method clarified, Level 1 parts list removed. · EP Porsche 944S2 89-91 requires 56mm flat plate intake restrictor; compression ratio 12.0:1 max, valve lift 0.500" max, dry sump allowed. · Toyota Corolla GTS RWD (84-87) and FX16 FWD (87-88) added to HP; old Corolla (84-87) removed. · T1 Mazda MX-5 Miata MazdaSpeed minimum weight rises to 2550 lbs, restrictor grows to 42mm. · T1 Chevrolet Corvette Cadillac XLR classified as model year 2019 and earlier. · Toyota MR-2 1.6L 85-89 HP track width corrected to 15×47 / 15×47 inches; stock track baseline now 103% plus 2.5 inches.showhide
FP Request to classify VW New Beetle 2.5L in EP #32725cars addedaddedVolkswagen New Beetle 2.5L 5-cyl DOHC classified in EP at 2400–2520 lbs with fuel injection.
FP Request Rotary Injection on Dual Y manifold #32775inductionadded · inductionEP Mazda RX-7 12A/13B and 13B now permit 2 bbl fuel injected throttle body with 42mm chokes on dual-y manifold.
FP Request for Corrado Stroke & Displacement Correction #32985wordingwordingEP VW Corrado 92-95 stroke corrected to 90.3 mm and displacement to 2792 cc.
T1 Correct Camaro Spec Line From Letter #30791 response to 3475lbs #32824weight -25 lbsfaster · weightT1 Camaro, CTS, Firebird, GTO minimum weight reduced to 3475 lbs from 3500 lbs.
FP Subaru BRZ Model Years #32500wordingwordingEP Subaru BRZ title updated to include model years 13–20; Toyota 86/Scion FR-S title likewise updated to 13–20.
T1 Fix FP350S limited prep and Shelby 350 full prep issues #31680enginefaster · engineT1-LP Ford Mustang FP350S restrictor increases from 70mm to 75mm.
T1 Request to Classify AMG GT4 #32610cars addedaddedMercedes-Benz AMG GT4 (2017-2021) added to T1 with 3400 lb minimum weight, SRO Power Level 2 engine control.
FP Weight Adjustment of Lotus 7 #32213weight +50 lbsslower · weightFP Lotus Super Seven 91.7 ci minimum weight increases 50 lbs, to 1580.
FP EP MX-5 Global Cup Car #32218weightweightEP Mazda MX-5 Global Cup 16-22 minimum weight set to 2400 lbs; sequential gearbox allowed with 150 lbs penalty.
FP Please Class BMW 128i in EP #32370cars addedaddedBMW 128i (08-13) classified in EP at 2700 lbs minimum with 2996 cc engine, stock throttle body, 11.0:1 compression and 0.400" valve lift limits.
FP Inconsistency in Body Work Descriptions #32396aeroadded · aeroEP, FP, HP open cars now allow carbon fiber hardtops if they retain OEM exterior profiles.
FP Request to classify the 1999-2000 Mazda Protege in FP #32398cars addedaddedMazda Protégé ES 99-00 classified FP, 2150–2258 lbs, 1839 cc DOHC, fuel injection, 11.0:1 compression, 0.450" valve lift.
FP Mazda RX8 with 13b Rotary #32170engineengineEP Mazda RX-8 13B carburetor option replaced with fuel-injected throttle body or stock fuel injection.
FP Request Idle control valve clarification #32178wordingwordingEP, FP, HP Production clarify idle control valve options: stock original allowed, removable with blocked ports, or mechanical replaced with electronic stock type.
FP Correct FP BMW 325e/es Displacement #32394wordingunclearFP BMW 325e/es displacement corrected to 2693 cc.
SM Update GCR Section 9.1.7.3.A.1. #32217wordingwordingSM Majors must run authorized Penske shock and mount; Regional competitors not required until further evaluation.
T1 Viper/Z06 Parity #31942engine -50 lbsfaster · engineT1 Dodge Viper ACR displacement rises to 8400 cc OEM, minimum weight drops to 3550 lbs.
T1 Discrepancy in T1 allowances #32293wordingwordingT1 Limited T1 specification reference removed; all T1 cars now have unified allowances.
FP EP Adjustments #31858inductionslower · inductionEP BMW Z3 2.5L intake restrictor reduced from 59mm to 58mm flat plate.
FP 1999 3.8L Ford Mustang to EP? #31635weightfaster · weightFord Mustang 94-98 weight reduced to 2550/2614/2678 lbs; 99-03 3.8L classified EP at 2700/2768/2835 lbs.
FP Improved Touring Tires #32064tyres & wheelsadded · tyres & wheelsEP, FP, HP Improved Touring cars may use any DOT-approved tyre as defined by 9.3.45.
FP VW Golf Jetta 2.0L intake and exhaust size correction. #32173engineslower · engineFP VW Golf III/Jetta III 93-98 intake valve shrinks to 39.5 mm (1.56 in), exhaust to 32.9 mm (1.30 in).
FP Throttle Body and Idle Air #31800wordingwordingEP, FP, HP: stock/original idle control devices permitted unmodified or completely removed with openings blocked.
FP Porsche 968 Engine Questions #31478engineengineEP Porsche 968 intake valve size changes to 39.0 mm, 1.54 mm seat width.
FP PCS E. 2. n. 4. Add Axle Shaft to Allow FWD the Same Freedom #31592otheraddedEP, FP, HP front-wheel-drive cars may alter body and subframes to install alternate axle shaft, matching RWD freedom.
FP BMW Z3 2.5L Spec Line #31724engineadded · engineEP BMW Z3 2.5L adds alternate throttle body option with Turner adapter and permits head casting 1738400.
FP FP Del Sol VTEC #31859engineslower · engineFP Honda Civic Del Sol VTEC compression ratio limited to 11.0:1, valve lift to .425", removes dry sump and internal engine prep allowances.
FP Standardize Level 2 Classifications in FP #31868wordingwordingFP Honda Prelude 84-87 and Mazda GLC/323 86-88 valve lift measurement method clarified, Level 1 parts list removed.
FP Classing Clarification for 1986 Toyota Corolla FX16 #31527cars addedaddedToyota Corolla GTS RWD (84-87) and FX16 FWD (87-88) added to HP; old Corolla (84-87) removed.
T1 Turbo Miata Help #31315weight +200 lbsslower · weightT1 Mazda MX-5 Miata MazdaSpeed minimum weight rises to 2550 lbs, restrictor grows to 42mm.
T1 Fix the T1 Corvette heading #31528cars addedaddedT1 Chevrolet Corvette Cadillac XLR classified as model year 2019 and earlier.
FP E&O; MR2 Track #31120suspension & brakessuspension & brakesToyota MR-2 1.6L 85-89 HP track width corrected to 15×47 / 15×47 inches; stock track baseline now 103% plus 2.5 inches.
1:36.395Max Grau · fastest of 28 · top 5 within 0.7s
1:36.655Max Grau · fastest of 28 · top 5 within 0.7s
146.2Gray Fowler
1:42.292Andrew Aquilante · fastest of 22 · top 5 within 1.3s+0.499s (+0.49%)
1:43.752Mark Boden · fastest of 22 · top 5 within 1.0s+0.881s (+0.86%)
159.2Mark Boden
+7.097squal +5.897s
107.3%qual 106.1%
1:51.082Craig Chima · fastest of 39 · top 5 within 1.2s-1.009s (-0.90%)
1:59.933Cliff Ira · fastest of 33 · top 5 within 5.4s+6.926s (+6.13%)
131.8Cliff Ira
+23.278squal +14.687s
124.1%qual 115.2%
1:57.695Brian Henderson · fastest of 90 · top 5 within 0.5s-0.611s (-0.52%)
1:58.837Brian Henderson · fastest of 88 · top 5 within 0.3s-0.263s (-0.22%)
119.8Kyle Greenhill
+22.182squal +21.300s
122.9%qual 122.1%
40 rule changes (T1: 18, FP: 21, SM: 1)16 cars added · 11 weight · 5 engine · 2 induction · 4 wording · 2 other · EP Honda S2000 now allows F22c engine in 1997cc and 2157cc displacements with revised weight brackets and specifications. · EP Nissan 240-SX S13/S14 weight drops to 2400 lbs base, 2460 turbo, 2520 supercharged; comp ratio raised to 12.0:1, valve lift to 0.500 inch. · T1 BMW E46, E36, Z3 minimum weight raised to 2700 lbs; 3.4L engine car to 2750 lbs. · EP Lotus/Caterham 7 America fuel injection permitted; IT preparation engine limitation removed. · Plymouth Arrow 76–80 classified in HP Prep at 1800–1890 lbs with 1598 cc iron-block OHV four-cylinder. · BMW 318i/is E30 (84-85) reclassified from FP to HP at 2200–2310 lbs, SOHC 1797cc, fuel injection, 11.0:1 compression, .425" valve lift limit. · FP Fiat X1/9 1300 loses 50 lbs to 1665; X1/9 Bertone loses 50 lbs to 1765. · Daimler SP 250 classified in EP with 2165 lbs minimum weight, 2548 cc eight-cylinder OHV engine, SU or Stromberg carburetors. · T1 Dodge Viper SRT-10 restrictor increases from 45mm to 57mm. · T1 Corvette and Cadillac XLR: Casting #799 heads now permitted on LS6 engines, no other head modifications allowed. · Porsche 924 Level 1 Prep moved from EP to FP classification. · EP, FP, HP clarify percentage weight penalties sum before applying to base weight, round to nearest pound. · T1 Mustang GT5.0L 18+ Performance Pack, Bullet, Mach 1 allowed with 100 lb penalty; Shelby/GT350/GT500 restrictor opens 65 mm to 70 mm. · T1 Dodge Viper SRT-10 Incl. Coupe 08-10 restrictor increases from 45mm to 57mm. · T1 Corvette C7 Grand Sport now included; intake restrictor increases from 70 mm to 73 mm. · T1 Corvette Z06 06-13 now allows aluminum chassis replacement with equivalent OE steel chassis. · 84-87 Mazda 626 reclassified from FP to HP with 2300–2415 lb weight, 1998cc SOHC engine, two 32mm carburetors. · FP Fiat X1/9 and Bertone 1300 brake rotors now 257 x 12 mm, 10.1 inch diameter, 0.407 inch thickness. · T1 Chevrolet Camaro with 6162 displacement minimum weight reduced to 3500 lbs. · T1-LP Chevrolet Corvette C5 Z06, C6 Grand Sport, and Z06 dry sump kit notes clarified to remove duplicates. · Mazda 3 S 04-08 classified in EP at 2350 lbs minimum, 2.26L DOHC four-cylinder, fuel injected with 55mm throttle body, comp ratio 12.0:1 max, valve lift 0.500" max. · FP Volkswagen Golf and Jetta III and IV intake valves increase to 40.0 mm, exhaust to 33.0 mm. · SM adds procedure for CRB-approved obsolete parts and BOP testing in sanctioned events with point forfeiture. · T1 LP aero adjustments: removed 50 lb weight allowance for stock OEM manifold/headers, reorganised aero and engine durability allowances into numbered list. · T1 Ford Mustang Challenge maximum displacement changes to 4600 cc for 3-valve engines, 5000 cc for others. · T1 BMW E46 allows carbon or fiberglass OEM-style dashboards with 25 pound weight penalty instead of requiring stock dash pad. · T1 Ford Mustang/Thunderbird specification removed Thunderbird model; now Shelby/Shelby GT350/GT500 only through 2018. · T1 Dodge Viper ACR 8400cc OEM added with 3600 lb minimum weight, 55mm flat-plate restrictor. · BMW M2CS Club Sport added to T1 Spec Lines classification. · Porsche 997.1 GT3 Cup (2006–2011) classified in T1 at 3600cc displacement, 3150 lbs minimum weight, no restrictor. · EP Austin-Healey 3000 gains option to use TR-6 front calipers and discs as alternate. · FP Volkswagen Golf 1.8, Jetta, Rabbit and Scirocco gain 50 lb weight breaks, minimum weights to 1900–1733 lbs. · T1 Limited Prep Chevrolet Corvette Z06 years extend to 2013, from 2012. · FP Mk2 Golf and Jetta 1.8 lose 50 lbs to 1900; HP Jetta GLI engine code removed. · EP, FP, HP Level 1 and Level 2 induction systems: carburettor jets, needles, metering rods allowed; throttle body porting permitted; wording clarified. · EP Nissan Datsun SRL 311U Roadster minimum weight reduced 75 lbs to 1925. · EP Triumph TR8 78-81 minimum weight drops to 2500 lbs. · Honda Civic EX 96-00 classified FP2 at 1975 lbs, SOHC 1590cc, fuel injection, 56mm throttle body, comp ratio 12.0:1 max, valve lift 0.450" max. · FP adds FAJS to permitted Weber-type and auto-type carburetor substitutes in two sections. · T1 Corvette C8 Z51 gets wider wheels and tyres, loses 100 lbs to 3550.showhide
FP Request to Allow F22c Engine for 2000-2003 Honda S2000 #30548cars addedaddedEP Honda S2000 now allows F22c engine in 1997cc and 2157cc displacements with revised weight brackets and specifications.
FP Request a review of the S14 240SX in EP. #30873weight -200 lbsfaster · weightEP Nissan 240-SX S13/S14 weight drops to 2400 lbs base, 2460 turbo, 2520 supercharged; comp ratio raised to 12.0:1, valve lift to 0.500 inch.
T1 T1 E46 BOP E&O for Letter # 29970 #30934weight +100 lbsslower · weightT1 BMW E46, E36, Z3 minimum weight raised to 2700 lbs; 3.4L engine car to 2750 lbs.
FP Lotus/Caterham 7 America Request #30392wordingwordingEP Lotus/Caterham 7 America fuel injection permitted; IT preparation engine limitation removed.
FP Request to classify ITC Plymouth Arrow #30588cars addedaddedPlymouth Arrow 76–80 classified in HP Prep at 1800–1890 lbs with 1598 cc iron-block OHV four-cylinder.
FP Reclassification of the 1984/85 BMW 318i from FP to HP #30661cars addedaddedBMW 318i/is E30 (84-85) reclassified from FP to HP at 2200–2310 lbs, SOHC 1797cc, fuel injection, 11.0:1 compression, .425" valve lift limit.
FP Fiat x1/9 Competition Adjustments #30711weight -50 lbsfaster · weightFP Fiat X1/9 1300 loses 50 lbs to 1665; X1/9 Bertone loses 50 lbs to 1765.
FP Reclassify Daimler SP 250 #30721cars addedaddedDaimler SP 250 classified in EP with 2165 lbs minimum weight, 2548 cc eight-cylinder OHV engine, SU or Stromberg carburetors.
T1 Request BoP for the Viper in 1 LP #29968enginefaster · engineT1 Dodge Viper SRT-10 restrictor increases from 45mm to 57mm.
T1 LS6 Alternative Head Question #30074cars addedaddedT1 Corvette and Cadillac XLR: Casting #799 heads now permitted on LS6 engines, no other head modifications allowed.
FP Move Porsche 924 in Level 1 Prep From EP to FP #30135cars addedaddedPorsche 924 Level 1 Prep moved from EP to FP classification.
FP Clarify Application of Percentage Based Weight Penalties #30669wordingwordingEP, FP, HP clarify percentage weight penalties sum before applying to base weight, round to nearest pound.
T1 T1-LP - Add Performance Pack, Bullet, Mach 1 to 18+ Mustang #29849enginefaster · engineT1 Mustang GT5.0L 18+ Performance Pack, Bullet, Mach 1 allowed with 100 lb penalty; Shelby/GT350/GT500 restrictor opens 65 mm to 70 mm.
T1 Request BoP for the Viper in 1 LP #29968enginefaster · engineT1 Dodge Viper SRT-10 Incl. Coupe 08-10 restrictor increases from 45mm to 57mm.
T1 Request to classify C7 and 13Viper in T1 LP #29969inductionfaster · inductionT1 Corvette C7 Grand Sport now included; intake restrictor increases from 70 mm to 73 mm.
FP Change Classification of 84-87 Mazda 626 from FP to HP #30350cars addedadded84-87 Mazda 626 reclassified from FP to HP with 2300–2415 lb weight, 1998cc SOHC engine, two 32mm carburetors.
FP Fiat X1/9 brake rotors #30423otherotherFP Fiat X1/9 and Bertone 1300 brake rotors now 257 x 12 mm, 10.1 inch diameter, 0.407 inch thickness.
T1 Request For Reduction in Weight/Penalties for Camaro #30443weightfaster · weightT1 Chevrolet Camaro with 6162 displacement minimum weight reduced to 3500 lbs.
T1 Fix dry sump Contradictions in T1-LP vs T2 #30596wordingwordingT1-LP Chevrolet Corvette C5 Z06, C6 Grand Sport, and Z06 dry sump kit notes clarified to remove duplicates.
FP Please Classify Mazda3 in FP #30165cars addedaddedMazda 3 S 04-08 classified in EP at 2350 lbs minimum, 2.26L DOHC four-cylinder, fuel injected with 55mm throttle body, comp ratio 12.0:1 max, valve lift 0.500" max.
FP Golf MkIII Valve Size Request #30268enginefaster · engineFP Volkswagen Golf and Jetta III and IV intake valves increase to 40.0 mm, exhaust to 33.0 mm.
SM Updates - Obsolete Parts & BOP Parts #30438wordingaddedSM adds procedure for CRB-approved obsolete parts and BOP testing in sanctioned events with point forfeiture.
T1 T1 LP Aero adjustments #30196weightslower · weightT1 LP aero adjustments: removed 50 lb weight allowance for stock OEM manifold/headers, reorganised aero and engine durability allowances into numbered list.
T1 Request to Clarify Miller Mustang Classification #28728engineengineT1 Ford Mustang Challenge maximum displacement changes to 4600 cc for 3-valve engines, 5000 cc for others.
T1 BMW E46 Carbon Dash #29806weightslower · weightT1 BMW E46 allows carbon or fiberglass OEM-style dashboards with 25 pound weight penalty instead of requiring stock dash pad.
T1 Request to Update T1 Mustang Spec Line #30001cars addedremoved · cars addedT1 Ford Mustang/Thunderbird specification removed Thunderbird model; now Shelby/Shelby GT350/GT500 only through 2018.
T1 Class BMW M2CS Club Sport #30195cars addedaddedBMW M2CS Club Sport added to T1 Spec Lines classification.
T1 997.1 GT3 Cup #30229cars addedaddedPorsche 997.1 GT3 Cup (2006–2011) classified in T1 at 3600cc displacement, 3150 lbs minimum weight, no restrictor.
FP Alternate Front Brake Rotors and Calipers for EP AH 3000 #29893otherotherEP Austin-Healey 3000 gains option to use TR-6 front calipers and discs as alternate.
FP Request VW weight break #29963weight -50 lbsfaster · weightFP Volkswagen Golf 1.8, Jetta, Rabbit and Scirocco gain 50 lb weight breaks, minimum weights to 1900–1733 lbs.
T1 Correct T1 Limited Prep Years #29708cars addedaddedT1 Limited Prep Chevrolet Corvette Z06 years extend to 2013, from 2012.
FP Mk2 VW Consistency and Cleanup of FP and HP Spec Lines #29195weight -50 lbsfaster · weightFP Mk2 Golf and Jetta 1.8 lose 50 lbs to 1900; HP Jetta GLI engine code removed.
FP Correct Wording for Level 1 and Level 2 Induction Systems #29406inductionfaster · inductionEP, FP, HP Level 1 and Level 2 induction systems: carburettor jets, needles, metering rods allowed; throttle body porting permitted; wording clarified.
2:12.806Scott Rettich · fastest of 25 · top 5 within 0.6s
2:13.271Owen McAllister · fastest of 23 · top 5 within 0.7s
143.4Owen McAllister
2:17.646Andrew Aquilante · fastest of 15 · top 5 within 3.7s
2:18.701Mark Boden · fastest of 14 · top 5 within 3.0s
158.8James Candelaria
+5.430squal +4.840s
104.1%qual 103.6%
2:31.414Ethan Shippert · fastest of 23 · top 5 within 2.2s
2:34.033Kevin Ruck · fastest of 21 · top 5 within 2.3s
133.2Sam Henry
+20.762squal +18.608s
115.6%qual 114.0%
2:42.209Kyle Greenhill · fastest of 77 · top 5 within 0.5s
2:43.748Preston Pardus · fastest of 75 · top 5 within 1.0s
121.3Kyle Greenhill
+30.477squal +29.403s
122.9%qual 122.1%
36 rule changes (FE2: 2, T1: 13, FP: 19, SM: 2)10 cars added · 3 engine · 3 suspension & brakes · 3 weight · 2 aero · 1 induction · 11 wording · 3 other · HP 84-87 Toyota Corolla wheel diameter increases from 13 to 15 inches. · SM allows aftermarket radiators in original location with stock OEM cooling fan, and permits 1990-1997 cars to install upper radiator seal NA75-50-OK7A. · FE2 oil cooler rule clarified: Setrab 50-625-7612 or any cooler with max core 13 inches wide by 6.5 inches high allowed. · EP BMW Z3 2.5L cylinder head casting 1738400 permitted with iron block castings 1748933 or 1738566. · SM rear brake caliper may use single bracket under upper retaining bolt head to prevent pin failure. · T1 rear wing wording clarifies Gurney flap terminology in chord length and mounting height rules. · Porsche 911 S 67-68 classified in EP at 1800–1890 lbs, 1991cc opposed 6-cylinder SOHC with 36mm carburetors. · FP Mazda 626 84-87 carburetor spec clarified to two auto-type sidedraft 32mm choke or fuel injection. · EP BMW 2.8L, 328i E36/E46, and 325i E36 now require iron blocks only; 325i E46 aluminum block removed. · FP Volkswagen Scirocco E&O adds four engine variants with weights 1520–1853 lbs and displacements 1471–1780 cc. · T1 and T2 Corvettes now allow coilover suspension with 800 lb max coil springs; T1 Z06 conversion no longer T1-only. · FP Pre: 1990–1994 Mazda Protégé classified at 2150–2258 lbs, 1839cc DOHC, fuel injection, 11.0:1 compression, .450" valve lift limit. · HP Mini Cooper 02-06 and 07-13 convertible model years corrected to 05-08 and 09-15 respectively. · T1 Porsche 996 GT3 Cup eligible model years changed from 02-05 to 98-04. · T1 Chevrolet Corvette Cadillac XLR may install SCRSPLR-001 rear spoiler with OE bodywork. · T1 Camaro OEM 366mm rear rotor and caliper allowed without weight penalty. · EP Caterham 7 America engine limited to IT prep with specific sections, comp ratio 10.0:1, valve lift .380 inch. · 1989-90 Nissan 240-SX SOHC added to FP Pre L2 at 2400–2520 lbs, 2389 cc, fuel injection, 11.0:1 compression, .450" valve lift limit. · T1 Porsche 996 Spec Lines: 996 Cup Replica Rear deck lid now allowed. · T1 Acura NSX Turbo and Audi TTRS now require DOT tires per GCR section 9.3. · FP Volkswagen Jetta, Rabbit, Scirocco reclassified with weights 1520–1853 lbs, intake valves 40.0 mm, exhaust 33.0 mm, throttle 35/52 mm. · HP Datsun 510 allows 40 DCOE carburetor option alongside existing 40 DCNF and 36mm DCNVH; auto side drafts moved to penalty structure. · Porsche 914-4 2.0L classified in FP Prep 2 at 2030–2132 lbs with 1968cc OHV engine, Solex/Weber/Dellorto carbs or fuel injection, 11.0:1 compression limit, .450" valve lift limit. · FP Ford Fiesta 78-80 minimum weight reduced 130 lbs, to 1660. · T1 BMW E46 and E36 models permitted with S54 engine; displacement corrected to 3250 cc from 3200 cc. · HP Datsun 1200 carburetor option changes from 26mm to 30mm choke(s) in 40 DCN, DCNF, IDF. · T1 adds Subaru WRX, WRX STI 2005-2020: 2457 cc, 3000 lbs minimum, 46 mm restrictor, alternate turbo permitted. · T1-LP Ford Mustang FP350S restrictor enlarged to 70mm; GT and GT5.0L weights increased to 3500 lbs, Brembo BBK at no penalty, restrictors removed from notes. · Ford Mustang/Thunderbird 5000 Coyote OEM added to T1; 2015-17 at 3450 lbs, 2018+ at 3450 lbs with 65mm flat plate restrictor. · T1 BMW M3 E92 (08-13) carbon dash allowed with 25 lb penalty added. · T1 Corvette C5 Z06, C6 coupe and Grand Sport, C6 Z06 may convert leaf springs to coilover suspension. · Mazda Miata models EP and FP throttle body specified 55mm, brake rotor thickness figures removed. · FP Mazda Protégé ES 2001–2003 newly classified at 2350–2468 lbs with 1991 cc DOHC four-cylinder, fuel injection, 11.0:1 compression, .450 in. valve lift limit. · FE minimum weight rises to 1270 lbs; FE2 minimum weight rises to 1270 lbs; new spring options added; tire warmers prohibited. · FP and HP: 1988–91 Honda Civic and CRX track widths corrected to 61.3 / 61.7 inches across multiple levels. · EP, FP, HP cylinder head rules reorganized for clarity; no performance change.showhide
FP 84-87 Toyota Corolla HP Wheel Diameter Allowance Proposal E&O #29458otherfasterHP 84-87 Toyota Corolla wheel diameter increases from 13 to 15 inches.
SM Radiator E&O Clarifications #29294wordingwordingSM allows aftermarket radiators in original location with stock OEM cooling fan, and permits 1990-1997 cars to install upper radiator seal NA75-50-OK7A.
FE2 FE/FE2 Oil Cooler #29293wordingwordingFE2 oil cooler rule clarified: Setrab 50-625-7612 or any cooler with max core 13 inches wide by 6.5 inches high allowed.
FP EP BMW Z3 Rule Clarification #28998wordingwordingEP BMW Z3 2.5L cylinder head casting 1738400 permitted with iron block castings 1748933 or 1738566.
SM Modifications to prevent failures of Rear Brake Caliper Pin #28953suspension & brakessuspension & brakesSM rear brake caliper may use single bracket under upper retaining bolt head to prevent pin failure.
FP Request to Classify Porsche 911 2.0L #28456cars addedaddedPorsche 911 S 67-68 classified in EP at 1800–1890 lbs, 1991cc opposed 6-cylinder SOHC with 36mm carburetors.
FP Request to change to Carburetor Spec Line 84-87 Mazda 626 #28926wordingwordingFP Mazda 626 84-87 carburetor spec clarified to two auto-type sidedraft 32mm choke or fuel injection.
FP BMW Cylinder Head Casting and Part Numbers #28708engineslower · engineEP BMW 2.8L, 328i E36/E46, and 325i E36 now require iron blocks only; 325i E46 aluminum block removed.
FP Correct Scirocco Spec line E&O #28892cars addedaddedFP Volkswagen Scirocco E&O adds four engine variants with weights 1520–1853 lbs and displacements 1471–1780 cc.
T1 Consider coil spring conversion Corvette in T2 #28824suspension & brakesadded · suspension & brakesT1 and T2 Corvettes now allow coilover suspension with 800 lb max coil springs; T1 Z06 conversion no longer T1-only.
FP Error in Mini Cooper Spec Line #28713wordingwordingHP Mini Cooper 02-06 and 07-13 convertible model years corrected to 05-08 and 09-15 respectively.
T1 Additional Clarification on 996 Cup in T1 From Letter #28040 #28060cars addedaddedT1 Porsche 996 GT3 Cup eligible model years changed from 02-05 to 98-04.
T1 Request SPEC Corvette Rear Spolier #28182aeroadded · aeroT1 Chevrolet Corvette Cadillac XLR may install SCRSPLR-001 rear spoiler with OE bodywork.
T1 T1 Rear Brake Rotor Size Exemption for Gen 5 Camaro #28402cars addedaddedT1 Camaro OEM 366mm rear rotor and caliper allowed without weight penalty.
FP Caterham 7 Spec Line #28498wordingwordingEP Caterham 7 America engine limited to IT prep with specific sections, comp ratio 10.0:1, valve lift .380 inch.
FP Request to classify SOHC 1989-90 240SX in F prod L2 #28553cars addedadded1989-90 Nissan 240-SX SOHC added to FP Pre L2 at 2400–2520 lbs, 2389 cc, fuel injection, 11.0:1 compression, .450" valve lift limit.
T1 Request 996 GT3 Trunk for Wing Allowance. #28153aeroadded · aeroT1 Porsche 996 Spec Lines: 996 Cup Replica Rear deck lid now allowed.
T1 All Touring, Change DOT Tire Language 9.1.9.1, 9.3.45 #28452wordingwordingT1 Acura NSX Turbo and Audi TTRS now require DOT tires per GCR section 9.3.
FP VW Weight and Valve Size Request #27886wordingwordingFP Volkswagen Jetta, Rabbit, Scirocco reclassified with weights 1520–1853 lbs, intake valves 40.0 mm, exhaust 33.0 mm, throttle 35/52 mm.
FP Request to allow 40 DCOE carb for the Datsun 510 #28195engineadded · engineHP Datsun 510 allows 40 DCOE carburetor option alongside existing 40 DCNF and 36mm DCNVH; auto side drafts moved to penalty structure.
FP Request to classify Porsche 914 2L in LPrep FProd #28231cars addedaddedPorsche 914-4 2.0L classified in FP Prep 2 at 2030–2132 lbs with 1968cc OHV engine, Solex/Weber/Dellorto carbs or fuel injection, 11.0:1 compression limit, .450" valve lift limit.
FP Request Ford Fiesta Weight Adjustment #28336weightfaster · weightFP Ford Fiesta 78-80 minimum weight reduced 130 lbs, to 1660.
T1 Request for E46 wagon with S54 engine in T1 #27427enginefaster · engineT1 BMW E46 and E36 models permitted with S54 engine; displacement corrected to 3250 cc from 3200 cc.
FP Request for Help for Datsun 1200 #27934inductionfaster · inductionHP Datsun 1200 carburetor option changes from 26mm to 30mm choke(s) in 40 DCN, DCNF, IDF.
T1 Request to include Subaru WRX/STI 02-18 in T1 #24916cars addedaddedT1 adds Subaru WRX, WRX STI 2005-2020: 2457 cc, 3000 lbs minimum, 46 mm restrictor, alternate turbo permitted.
T1 Request Ford Mustang FP350S T1-LP weight and restrictor change #26662weight +100 lbsfaster · weightT1-LP Ford Mustang FP350S restrictor enlarged to 70mm; GT and GT5.0L weights increased to 3500 lbs, Brembo BBK at no penalty, restrictors removed from notes.
T1 Request to classify Ford Coyote 3rd Gen OEM #27145cars addedaddedFord Mustang/Thunderbird 5000 Coyote OEM added to T1; 2015-17 at 3450 lbs, 2018+ at 3450 lbs with 65mm flat plate restrictor.
T1 Request alternate dashboard #27276otheraddedT1 BMW M3 E92 (08-13) carbon dash allowed with 25 lb penalty added.
T1 Request for Allowance of Coil Springs on Limited Prep C6 Corvette #27713suspension & brakesadded · suspension & brakesT1 Corvette C5 Z06, C6 coupe and Grand Sport, C6 Z06 may convert leaf springs to coilover suspension.
FP Request to List Mazda Miata Throttle Body Size #27907wordingwordingMazda Miata models EP and FP throttle body specified 55mm, brake rotor thickness figures removed.
FP Request to Classify 2001-2003 Mazda Protege ES in FP #27922cars addedaddedFP Mazda Protégé ES 2001–2003 newly classified at 2350–2468 lbs with 1991 cc DOHC four-cylinder, fuel injection, 11.0:1 compression, .450 in. valve lift limit.
FE2 FE / FE2 Update Rules #27624weightslower · weightFE minimum weight rises to 1270 lbs; FE2 minimum weight rises to 1270 lbs; new spring options added; tire warmers prohibited.
FP Request to Correct Track of 1988-91 Honda Civic #27487otherotherFP and HP: 1988–91 Honda Civic and CRX track widths corrected to 61.3 / 61.7 inches across multiple levels.
FP Re-organize Prep2 Cylinder Head Rules for Clarity & Consistency #27661wordingwordingEP, FP, HP cylinder head rules reorganized for clarity; no performance change.
1:51.062Liam Snyder · fastest of 20 · top 5 within 1.3s
1:52.154Liam Snyder · fastest of 19 · top 5 within 0.7s
142.6Robert Vanman
1:54.771Andrew Aquilante · fastest of 19 · top 5 within 3.1s
2:14.413Andrew Aquilante · fastest of 15 · top 5 within 4.8s
156.2Mark Boden
+22.259squal +3.709s
119.8%qual 103.3%
2:07.436Eric Prill · fastest of 19 · top 5 within 0.6s
2:08.076Eric Prill · fastest of 18 · top 5 within 0.8s
131.4Ken Kannard
+15.922squal +16.374s
114.2%qual 114.7%
2:14.552Todd Buras · fastest of 60 · top 5 within 0.2s
2:16.459Elivan Goulart · fastest of 56 · top 5 within 0.4s
119.8Jim Drago
+24.305squal +23.490s
121.7%qual 121.2%
32 rule changes (T1: 19, FP: 9, SM: 4)8 cars added · 5 weight · 3 aero · 2 induction · 2 suspension & brakes · 10 wording · 2 other · FP and HP Austin-Healey Sprite Mk I / MG Midget may replace rear bodywork aft of cockpit with alternate material stock-appearing components. · EP Mazda MX-5 Global Cup classification updated to include 2019 model year. · Production classes: suspension rule clarified to specify spindles, hubs, bushings, bearings, and ball joints unrestricted. · Production carburetor and fuel injection rules clarified: permitted optional carburetors listed, Weber and auto-type substitutions specified, fuel injection throttle body and butterfly dimensions detailed, intake manifold port extension pr… · EP, FP, HP carburetors: jets, needles, metering rods, needle valves unrestricted; choke parts removable; stock or optional Weber 40 DCN permitted; Weber types, auto types listed. · T1-LP Chevrolet Camaro 1LE 2016+ minimum weight reduced to 3500 lbs, restrictor increased to 70mm. · EP Mazda MX-5/Miata model years expand from 1999-2002 to 1999-2005. · Ford Mustang Challenge added to T1 as E&O with 4600cc displacement, 3300 lbs minimum weight, no restrictor. · T1 Chevrolet Corvette Cadillac XLR model year range removed from specification. · T1 Cadillac CTS/CTS-V, Chevrolet Camaro, Pontiac Firebird and GTO intake restrictor increases from 67 mm to 70 mm. · T2-T4 touring tires must be DOT certified with minimum U speed rating; TCS line size is maximum unless noted. · Ford Mustang with 3.5 EcoBoost engine added to T1: 3496 cc displacement, 3300 lb minimum weight, 31 mm restrictor. · T1 Corvette C5 body allowed C7 carbon aero parts, adds fifty pounds. · T1 Audi TTRS must conform to July 24th, 2015 revision 7 GTS rules, not December 14th, 2011 revision 3. · T1 minimum ride height set to 3.5 inches, measured at rocker panel without driver. · T1 Porsche 928 S4/GTS-R minimum weight drops from 3500 to 3200 lbs; 60mm flat plate restrictor removed. · EP, FP, HP: clarified that tapered holes in ball joints can be reamed for bolt conversion, and wheel bearings and hubs unrestricted on all axles. · EP open cars may now use aftermarket hardtops if OEM-appearance and non-carbon-fiber; specific model allowances removed as redundant. · Porsche 928 S4/928 GTS-R added to T1 at 5400cc, 3500 lbs minimum, 60mm restrictor. · FP Dodge Daytona/Chrysler Laser 84-85 added at 2100 lbs; Shelby Charger/Omni 024 83-84 weight cut to 2100 lbs. · SM fuel pump and filter now permitted as Mazda or OEM equivalent part. · T1-LP Ford Mustang GT 5.0L 2018- classified at 3400 lbs with 65mm restrictor, T2 and T3 Mustangs limited to 2015-2017. · SM allows factory Mazda ECU and injector harnesses (P/N 0000-10-020E-99, 0000-10-080D-99) on 1999–2000 model year cars, unmodified. · SM electrical rules reorganized and clarified; alternator now externally regulated only by OEM ECU or master kill switch; harness repair by splicing permitted. · SM tire tread protrusion language removed from GCR 9.1.7.C.5. · T1-LP Mustang GT350(R) spec line replaced with complete dimensions, gearing, brakes, weight 3650 lbs curb, carbon wheels standard. · Ford Mustang FP350S (2017) classified in T1-LP with 3600 lbs minimum weight, 18×11 wheels, 315 tires, 6-speed gears. · T1 suspension rules clarified: spherical bearings, solid or spherical bushings, and alternate control arms now permitted. · T1 Porsche 996 and 996 GT3 Cup lose 150–200 lbs to 3000; 997 loses 50 lbs to 3100. · Porsche 997 T1 Maximum gains PDK transmission option; GT3 Cup engine remains not allowed. · T1 Acura NSX Turbo World Challenge weight rises to 3100 lbs, restrictor shrinks to 44mm. · T1–T4 spec car classifications clarified with permitted parts, rule conformance versions, and exclusions of other touring modifications.showhide
FP Request bodywork for Austin Healey Bugeye Sprite MK1 #27106aeroadded · aeroFP and HP Austin-Healey Sprite Mk I / MG Midget may replace rear bodywork aft of cockpit with alternate material stock-appearing components.
FP Request to classify the GMX5 2019 #27263cars addedaddedEP Mazda MX-5 Global Cup classification updated to include 2019 model year.
FP level one susp. component rule #27270wordingwordingProduction classes: suspension rule clarified to specify spindles, hubs, bushings, bearings, and ball joints unrestricted.
FP Clarification of Carb Rules - Prep 1 #27300wordingwordingProduction carburetor and fuel injection rules clarified: permitted optional carburetors listed, Weber and auto-type substitutions specified, fuel injection throttle body and butterfly dimensions detailed, intake manifold port extension pr…
FP Clarification of Carb Rules - Prep 2 #27301inductioninductionEP, FP, HP carburetors: jets, needles, metering rods, needle valves unrestricted; choke parts removable; stock or optional Weber 40 DCN permitted; Weber types, auto types listed.
T1 T1 LP 2016 Camaro and Later #27198weight -100 lbsfaster · weightT1-LP Chevrolet Camaro 1LE 2016+ minimum weight reduced to 3500 lbs, restrictor increased to 70mm.
FP Request Miata Eligibility - 2003 #27121cars addedaddedEP Mazda MX-5/Miata model years expand from 1999-2002 to 1999-2005.
T1 Request to return Ford Mustang Challenge Car to T1 #26751cars addedaddedFord Mustang Challenge added to T1 as E&O with 4600cc displacement, 3300 lbs minimum weight, no restrictor.
T1 Correct years in T1 FP Corvette spec #27023wordingwordingT1 Chevrolet Corvette Cadillac XLR model year range removed from specification.
T1 Request BoP Baten - T1 Camaro - Follow up to Letter # 26145 #26900inductionfaster · inductionT1 Cadillac CTS/CTS-V, Chevrolet Camaro, Pontiac Firebird and GTO intake restrictor increases from 67 mm to 70 mm.
T1 Clarify DOT tires touring #26556wordingwordingT2-T4 touring tires must be DOT certified with minimum U speed rating; TCS line size is maximum unless noted.
T1 Request to Classify EcoBoost Mustang #25841cars addedaddedFord Mustang with 3.5 EcoBoost engine added to T1: 3496 cc displacement, 3300 lb minimum weight, 31 mm restrictor.
T1 Request Corvette aerodynamic aids #26265aeroslower · aeroT1 Corvette C5 body allowed C7 carbon aero parts, adds fifty pounds.
T1 Audi TTRS VTS Documentation Revision #26578wordingwordingT1 Audi TTRS must conform to July 24th, 2015 revision 7 GTS rules, not December 14th, 2011 revision 3.
T1 Request Ride Height Clarification #26599suspension & brakessuspension & brakesT1 minimum ride height set to 3.5 inches, measured at rocker panel without driver.
T1 Opposes Unfair weight and throttle restrictor #26719weight -300 lbsfaster · weightT1 Porsche 928 S4/GTS-R minimum weight drops from 3500 to 3200 lbs; 60mm flat plate restrictor removed.
FP Rollcenter Correction Clarification #25873wordingaddedEP, FP, HP: clarified that tapered holes in ball joints can be reamed for bolt conversion, and wheel bearings and hubs unrestricted on all axles.
FP Hardtops #26476aeroadded · aeroEP open cars may now use aftermarket hardtops if OEM-appearance and non-carbon-fiber; specific model allowances removed as redundant.
T1 Request to classify the Porsche 928GTS/S4 in Touring 1 #26315cars addedaddedPorsche 928 S4/928 GTS-R added to T1 at 5400cc, 3500 lbs minimum, 60mm restrictor.
FP Request Classification of Dodge Daytona in F Production #26259weight -150 lbsfaster · weightFP Dodge Daytona/Chrysler Laser 84-85 added at 2100 lbs; Shelby Charger/Omni 024 83-84 weight cut to 2100 lbs.
SM Request to allow aftermarket fuel filters. #26370otheraddedSM fuel pump and filter now permitted as Mazda or OEM equivalent part.
T1 Request Mustang GT Limited Prep 2018 Classification #24431cars addedaddedT1-LP Ford Mustang GT 5.0L 2018- classified at 3400 lbs with 65mm restrictor, T2 and T3 Mustangs limited to 2015-2017.
SM Request 99-00 replacement Wire harnesses #25602otheraddedSM allows factory Mazda ECU and injector harnesses (P/N 0000-10-020E-99, 0000-10-080D-99) on 1999–2000 model year cars, unmodified.
SM Organize and Clarify 9.1.7.C.1.o. #25913wordingwordingSM electrical rules reorganized and clarified; alternator now externally regulated only by OEM ECU or master kill switch; harness repair by splicing permitted.
SM Strike Tire Tread Language #26123wordingremovedSM tire tread protrusion language removed from GCR 9.1.7.C.5.
T1 Class 2015+ Mustang GT350(R) #21466wordingwordingT1-LP Mustang GT350(R) spec line replaced with complete dimensions, gearing, brakes, weight 3650 lbs curb, carbon wheels standard.
T1 Request to Classify Ford FP350S in T1-LP #25341cars addedaddedFord Mustang FP350S (2017) classified in T1-LP with 3600 lbs minimum weight, 18×11 wheels, 315 tires, 6-speed gears.
T1 Amendment to Request #25555 #25556suspension & brakessuspension & brakesT1 suspension rules clarified: spherical bearings, solid or spherical bushings, and alternate control arms now permitted.
T1 Request to balance 996 v 997 T1 weight #25658weightfaster · weightT1 Porsche 996 and 996 GT3 Cup lose 150–200 lbs to 3000; 997 loses 50 lbs to 3100.
T1 Request to Add PDK Transmission to 997 Porsche Spec Line #25668cars addedaddedPorsche 997 T1 Maximum gains PDK transmission option; GT3 Cup engine remains not allowed.
T1 T1 World Challenge/Grand AM Spec Cars #25687weightslower · weightT1 Acura NSX Turbo World Challenge weight rises to 3100 lbs, restrictor shrinks to 44mm.
T1 Add Clarification to Spec Car Classifications Vehicle Spec #25774wordingwordingT1–T4 spec car classifications clarified with permitted parts, rule conformance versions, and exclusions of other touring modifications.
Every event the class ran, at any track, oldest to newest on the chart and newest first in the table. Each point is the class's best lap as a share of FE2's best on the same day: the weather, the track and its configuration cancel out, so one figure compares across tracks and years where lap times cannot. It still moves when the yardstick's own balance changes or its field thins, and an event the yardstick did not run has no point. A best from fewer than three cars is greyed. The rule changes that took effect between two events are folded between their rows.